THS1230CDWR vs THS1230CDWG4 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ THS1230CDWR بواسطة Texas Instruments و THS1230CDWG4 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | THS1230CDWR | THS1230CDWG4 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | ADC/DAC | ADC/DAC |
| حالة دورة الحياة | نشط | نشط |
| الدقة | 12 bits | 12 bits |
| Sample Rate | 30 MSPS | — |
| Number of Channels | 1 | 1 |
| Supply Voltage (AVDD) | 3.3 V (single supply) | — |
| Architecture | Pipelined / multi-stage with digital error correction | Pipelined, multi-stage |
| Input Type | Configurable: single-ended, single-ended with offset, or differential | — |
| Analog Input Bandwidth | [DATA_NEEDED: analog input bandwidth MHz] | — |
| SNR | [DATA_NEEDED: SNR dBFS at fIN] | — |
| SFDR | [DATA_NEEDED: SFDR dBc at fIN] | — |
| INL | [DATA_NEEDED: INL LSB] | — |
| DNL | [DATA_NEEDED: DNL LSB] | — |
| Power Dissipation | <250 mW at 30 MSPS (typical) | — |
| Power-Down Mode | Yes (hardware PD pin) | — |
| Digital Output | CMOS, parallel 12-bit | — |
| درجة حرارة التشغيل | 0 °C to +70 °C (C-grade commercial) | — |
| العلبة | 28-pin SOIC (DW), 7.50 mm body width, tape and reel | — |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| حالة RoHS | Compliant | — |
| Reference | Internal (external reference option) | — |
| Sampling Rate (Max) | — | 30 MSPS |
| Conversion Time (Max) | — | 0.033 us (approx. 33 ns) |
| Data Interface | — | Parallel CMOS |
| Analog Input Configuration | — | Differential or single-ended |
| Nominal Supply Voltage | — | 3.3 V |
| Power-Down Feature | — | Yes (dedicated PD pin) |
| نطاق درجة حرارة التشغيل | — | 0C to +70C |
| العلبة / الحالة | — | 28-SOIC (DW), 0.295" / 7.50 mm width |
| Lead-Free / RoHS | — | Yes (G4 green finish, RoHS compliant) |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dBFS at fin and Fs] |