THVD1552DR vs MAX3485ESA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ THVD1552DR بواسطة Texas Instruments و MAX3485ESA+ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | THVD1552DR | MAX3485ESA+ |
|---|---|---|
| العلامة التجارية | Texas Instruments | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Type | Transceiver | — |
| Protocol | RS-485 / RS-422 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Signaling Rate (max) | 50 Mbps | — |
| Bus-Pin ESD Protection (HBM) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| IEC EFT Immunity | ±4 kV (IEC 61000-4-4 fast transient) | — |
| Receiver Fail-Safe | Yes (open, short, idle bus to logic-high) | — |
| Unit Load | 1/8 unit load (up to 256 nodes per bus) | — |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C | — |
| العلبة | 14-SOIC (D), 3.90 mm width | 8-pin SOIC |
| نوع التركيب | Surface Mount | Surface mount |
| مستوى MSL | MSL1-260C-UNLIM (per PartGenie) | — |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes (TI product page) | — |
| Product Type | — | RS-485/RS-422 transceiver |
| جهد التغذية | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |