WSSFM10R1AT vs WSSFM10R1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ WSSFM10R1AT بواسطة WISOL و WSSFM10R1 بواسطة WISOL. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | WSSFM10R1AT | WSSFM10R1 |
|---|---|---|
| العلامة التجارية | WISOL | WISOL |
| الفئة | RF Modules | RF Modules |
| حالة دورة الحياة | نشط | نشط |
| Manufacturer | WISOL / SeongJi | WISOL (Sigfox IoT BU transitioned to SEONGJI Industrial Co., LTD effective 2025-04-01) |
| Product Type | Sigfox RF Transceiver Module | — |
| Sigfox Zone | RCZ1 (ETSI 868 MHz - Europe/MEA) | — |
| Operating Frequency | 868 MHz (Sub-1 GHz) | — |
| Protocol | Sigfox Monarch (0G LPWAN) | Sigfox-only mode (no Sub-1 GHz raw radio fallback) |
| Control Interface | AT commands over UART | — |
| Package Type | 31-pin SMD module | — |
| Module Size | 13.0 mm x 15.0 mm x 2.21 mm | — |
| Antenna | External (antenna pad/connector) | — |
| جهد التغذية | [DATA_NEEDED: Vdd range] | — |
| Typical Supply Voltage | 3.3 V | — |
| TX Output Power | [DATA_NEEDED: dBm] | — |
| Receiver Sensitivity | [DATA_NEEDED: dBm] | — |
| Current Consumption (TX) | [DATA_NEEDED: mA] | — |
| Current Consumption (RX) | [DATA_NEEDED: mA] | — |
| Sleep Current | [DATA_NEEDED: uA] | — |
| درجة حرارة التشغيل | [DATA_NEEDED: C range] | — |
| نوع التركيب | Surface Mount | Surface Mount (SMD), Tape & Reel |
| حالة RoHS | Compliant | — |
| Certifications | Sigfox verified, RCZ1 / ETSI EN 300 220 (region dependent) | — |
| Part Family | — | WSSFM10 Sigfox module family |
| Regional Zone | — | RCZ1 (Europe, Middle East, Africa), RCZ6 (India), RCZ7 (Russia) |
| Module Dimensions | — | 13.0 x 15.0 x 2.21 mm |
| العلبة | — | 31-pin SMD land-grid module |
| Host Interface | — | UART (AT command set on AT variants) |
| Frequency Reference | — | Integrated TCXO |
| Integrated MCU | — | Yes (on-board) |
| Integrated RF Transceiver | — | Yes (OnSemi AX-Sigfox implementation) |
| Recommended Maximum TX Output Setting | — | 14 dBm default setting (per datasheet rev. 12) |
| Pin-to-Pin Compatible Family | — | RCZ1/RCZ2/RCZ3/RCZ4 module variants share 31-pin layout |
| GPIO2/GPIO3 Note | — | Marked Not Connected on RCZ2/RCZ4-compatible firmware images |
| Operating Conditions | — | VCC = 3.3 V typical, Temp = 25 C (per datasheet RF spec section) |
| Compliance | — | RoHS (per distributor listings) |