AD534LDZ - Precision 4-Quadrant Multiplier | Analog Devices
MPN: AD534LDZ ✓ نشطAD534LDZ نظرة عامة
An analog multiplier is an integrated circuit that produces an output proportional to the product of two input voltages. A four-quadrant multiplier can process positive and negative inputs while retaining the correct output polarity. In signal-processing systems, this device belongs to the multiplier/divider class, which extends to analog computation, instrumentation, control, and measurement. Its monolithic construction combines the multiplier core, reference elements, trimming network, and output amplifier in one package.
The AD534 family uses laser trimming to establish an overall scale factor of 10 V. According to the Analog Devices AD534 datasheet, an on-chip buried Zener supplies a stable reference that supports the trimming system. The result is a precision multiplier/divider with internally corrected scale-factor accuracy, supply rejection, low temperature coefficients, and long-term stability. These characteristics make the device suitable for analog control systems in which multiplier error directly influences system gain.
A four-quadrant implementation permits both polarities without external sign-detection circuitry. This simplifies instrumentation using differential or bipolar sensor signals, particularly when the second input can also change polarity. Division is obtained by placing the denominator signal on the appropriate multiplier input. Careful reference and feedback design remains necessary because practical accuracy depends on signal range, denominator magnitude, supply conditions, trimming, and the precision of external resistors.
Typical uses include precision test and measurement equipment, industrial process-control loops, laboratory signal conditioning, analog computation modules, closed-loop control, and four-quadrant signal modulation. The AD534LDZ is particularly appropriate when a system requires multiplication or division accuracy beyond a general-purpose analog multiplier and can accommodate a 14-CDIP through-hole package.
Designers should preserve the required supply range and observe the pin-description table in the manufacturer datasheet when assigning input, output, reference, and supply connections. Signal amplitudes must remain within the operating limits for the selected accuracy grade. External resistor matching and temperature compensation may be necessary when the highest multiplier or divider accuracy is required.
This page combines the exact package and production information, documented multiplier characteristics, practical application guidance, parameter comparisons, and sourcing options for engineers evaluating the AD534LDZ as a precision analog signal-processing component.
بدائل مباشرة لـ AD534LDZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع AD534LDZ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Trim Method.
AD534JD
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AD534JH
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
AD534LD
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←AD534LH
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
AD534TD
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
AD534LDZ الحدود القصوى والخصائص الكهربائية
| Product Type | Monolithic precision four-quadrant multiplier/divider |
| Manufacturer | Analog Devices |
| Production Status | Production |
| Trim Method | Laser-trimmed, internally trimmed |
| Quadrants | 4 quadrants |
| Overall Scale Factor | 10 V |
| Supply Voltage Range | 8 V to 18 V |
| Operating Supply Current | 4 mA |
| العلبة | 14-CDIP |
| Package Body Width | 7.87 mm |
| Package Height | 3.56 mm |
| Package Length | 19.43 mm |
| Unit Weight | 0.058802 oz |
| Factory Pack Quantity | 25 units |
| Reference Implementation | On-chip buried Zener reference |
دليل تكوين أطراف AD534LDZ 19.43 mm
تكوين الأطراف لـ AD534LDZ (حزمة 19.43 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD534LDZ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AD534LDZ مناسب لـ 6 التطبيقs: Precision Analog Control Loops, Laboratory Signal Conditioning, Four-Quadrant Modulation, Precision Test and Measurement, Analog Computation Modules, Sensor Signal Scaling.
Precision Analog Control Loops
The AD534LDZ fits analog control systems that multiply a command or error signal by a continuously varying gain or feedback factor. Its four-quadrant operation supports positive and negative control polarities without an external sign-detection stage, while the internally trimmed 10 V scale factor improves repeatability of the loop gain. The device operates from an 8 V to 18 V supply and draws 4 mA, making it appropriate for instrumentation and industrial control boards with available analog power rails. Accurate system performance still depends on keeping both multiplier inputs within their specified ranges and selecting external resistors appropriate to the required precision. Because the AD534LDZ uses a 14-CDIP package, it is best suited to through-hole or socketed control hardware rather than compact surface-mount designs.
موصى به
Laboratory Signal Conditioning
The AD534LDZ is useful in laboratory signal-conditioning systems that must scale bipolar inputs or compute ratios between measured quantities. Four-quadrant multiplication permits either input polarity to change while the output retains the mathematically correct sign. Its monolithic construction, laser trimming, buried-Zener reference, and 10 V overall scale factor support repeatable analog calculations. The 8 V to 18 V operating supply and 4 mA operating current are practical for a bench instrument or laboratory controller. Engineers should check the datasheet's input and output limits, observe the denominator range during division, and account for resistor tolerance and temperature drift when establishing measurement accuracy.
موصى به
Four-Quadrant Modulation
The AD534LDZ can implement four-quadrant modulation when one analog input represents a carrier or baseband waveform and the other represents a signed amplitude-control signal. Supporting all four input quadrants lets the circuit modulate polarity without separate analog inversion stages. The internally trimmed 10 V scale factor provides a defined multiplier relationship, while low temperature coefficients and long-term stability help preserve modulation gain over time. Designers should keep both signals within the input range specified by the Analog Devices AD534 datasheet and provide clean 8 V to 18 V supply rails. Component tolerances and parasitic paths must also be included in the error budget when modulation depth or distortion requirements are demanding.
موصى به
Precision Test and Measurement
The AD534LDZ is appropriate for precision test and measurement equipment that compares or scales bipolar analog quantities. A multiplier can generate proportional error signals, while a divider configuration can calculate a ratio when the denominator remains safely above zero. The device's four-quadrant behavior accommodates positive and negative test currents or sensor outputs, and its trimmed architecture supports stable scale-factor performance. With an 8 V to 18 V supply range and 4 mA operating current, it fits many analog measurement subsystems. For laboratory-grade results, use the manufacturer input limits, avoid denominator values near zero, and characterize external resistor drift over the intended measurement-temperature range.
موصى به
Analog Computation Modules
The AD534LDZ implements a fundamental analog-computation operation in systems that multiply variables or divide one signal by another. Its monolithic, laser-trimmed construction consolidates the multiplier core, stable reference arrangement, correction network, and output amplifier into one device. The 10 V overall scale factor provides the basis for designing the surrounding feedback and trim circuitry. The part is particularly useful in larger analog-computing modules where one multiplier is combined with additional amplifiers for multiplication, squaring, division, or nonlinear transfer functions. The 14-CDIP package favors instrument and industrial backplane construction. Circuit stability must be evaluated across supply, input, and output ranges using the complete electrical tables in the manufacturer datasheet.
موصى به
Sensor Signal Scaling
The AD534LDZ can scale bipolar sensor outputs where the measurement requires multiplication by a calibration factor or division by a reference quantity. Four-quadrant operation is valuable for sensors that may produce either polarity, including current or voltage transducers. The internally trimmed 10 V scale factor supports repeatable calibration, while the device's monolithic construction avoids the need to assemble discrete multiplier networks. A practical implementation should place the sensor signal and calibration or denominator signal on the designated multiplier inputs and monitor the resulting output against the datasheet limits. Supply regulation, input offset, temperature drift, and external resistor matching should be included in the calibration and uncertainty budget.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AD534LDZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AD534JD | AD534JH | AD534LD | AD534LH | AD534TD |
|---|---|---|---|---|---|---|
| Package | 14-CDIP | 14-CDIP | 14-CDIP | 14-CDIP | 14-CDIP | 14-CDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Four-quadrant multiplier/divider | Four-quadrant multiplier/divider | Four-quadrant multiplier/divider | Four-quadrant multiplier/divider | Four-quadrant multiplier/divider | Four-quadrant multiplier/divider |
| Overall Scale Factor | 10 V | 10 V for the AD534 family | 10 V for the AD534 family | 10 V for the AD534 family | 10 V for the AD534 family | 10 V for the AD534 family |
| Trim Method | Laser trimmed and internally trimmed | Laser trimmed and internally trimmed for the AD534 family | Laser trimmed and internally trimmed for the AD534 family | Laser trimmed and internally trimmed for the AD534 family | Laser trimmed and internally trimmed for the AD534 family | Laser trimmed and internally trimmed for the AD534 family |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
أبرز الفروقات
- Four-quadrant bipolar multiplication and division (مقابلAD632ADZ)
- Internally trimmed scale factor (مقابلAD534JD)
- Documented low operating supply current (مقابلAD534KD)
ملاحظات التصميم
Use the 14-CDIP footprint and pin numbering defined by the Analog Devices AD534 data sheet rather than inferring connections from a generic DIP drawing. Keep the multiplier inputs, reference, output, and supply traces short, and provide adequate clearance between sensitive input paths and supply or digital return currents. Because the package is ceramic and through-hole, confirm socket compatibility, hole spacing, and thermal expansion before releasing artwork.
The AD534LDZ operates from an 8 V to 18 V supply and consumes 4 mA under the cited operating condition. Place supply-decoupling capacitors near the device and maintain stable rails across the full input and output operating range. If the circuit also powers precision amplifiers or converters, separate noisy supply paths from the multiplier inputs and reference network to avoid degrading the trimmed scale-factor performance.
For division applications, avoid denominator values close to zero because the output would move beyond the usable signal range. Keep both multiplier inputs within their documented limits, terminate unused inputs according to the data-sheet guidance, and account for parasitic capacitance around high-impedance nodes. Accurate results depend not only on the AD534LDZ but also on matched external resistors, low-drift reference components, and controlled signal bandwidth.
Do not treat every AD534 ordering suffix as electrically identical. The package designation, temperature grade, and qualification requirements can change across AD534 variants even when the multiplier architecture remains related. Before replacing AD534LDZ, compare the complete ordering table, pin description, supply limits, accuracy specifications, temperature range, and package outline. Also verify that the division denominator and output remain within linear operating limits.
معلومات الامتثال
The AD534 family is listed as production by Analog Devices. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for AD534LDZ were not established, so those fields remain unknown.