AD642SH - Dual 1 MHz BiFET Operational Amplifier | Analog Devices
MPN: AD642SH ✓ نشطAD642SH نظرة عامة
An operational amplifier is an active analog signal-conditioning component that amplifies the difference between two input voltages. The AD642 belongs to the BiFET operational-amplifier family, combining bipolar transistor performance with field-effect-transistor input characteristics. Its matched dual channels are useful when two signals require similar amplifier behavior, particularly in instrumentation and signal-chain designs.
The AD642SH provides low bias current, specified at 35 pA maximum when warmed up, together with low offset voltage and low input voltage noise. Its 1 MHz gain-bandwidth relationship supports general-purpose precision signal amplification and filtering. The matched offset voltage and matched bias-current characteristics can simplify calibration in dual-channel systems where channel matching is important.
The AD642SH is specified for military-style hermetic construction in the TO-99 package, making it suitable for applications requiring a compact, temperature-stable operational amplifier in a metal can. Its electrical characteristics are intended for analog instrumentation, test equipment, audio and communication circuits, and other applications where input bias current and channel matching are important design considerations.
Typical implementations include low-level sensor amplifiers, current-to-voltage converters, precision filters, and dual-channel signal conditioning. The circuit designer should observe the input common-mode and output voltage limits, provide adequate bypassing, and verify stability with the selected feedback network. Because the AD642SH is a hermetic TO-99 device, PCB layout should account for the package's through-hole geometry and thermal path.
This page summarizes the AD642SH electrical characteristics, package information, pinout limitations, pricing reference, and practical replacement considerations. For final design decisions, use the manufacturer datasheet for absolute maximum ratings, input and output ranges, matching limits, and application-specific test conditions.
بدائل مباشرة لـ AD642SH — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع AD642SH (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Maximum Input Bias Current, Maximum Offset Voltage, Package, Mounting Type.
AD642JH
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
AD642KH
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←AD642LH
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←AD642SH/883
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
AD642SH/883B
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
AD642SH الحدود القصوى والخصائص الكهربائية
| Number of Channels | 2 |
| Amplifier Type | Precision dual BiFET operational amplifier |
| Maximum Offset Voltage | 3500 uV |
| Gain-Bandwidth Product | 1 MHz |
| Maximum Input Bias Current | 35 pA when warmed up |
| Offset Voltage | 500 uV maximum |
| Input Voltage Noise | 2 uV p-p |
| Open-Loop Gain | High |
| العلبة | 8-pin hermetically sealed metal-can TO-99 |
| نوع التركيب | Through-hole |
| Input Transistor Technology | Ion-implanted JFET input with laser-wafer trimming |
| حالة RoHS | unknown |
دليل تكوين أطراف AD642SH 8-pin hermetically sealed metal-can to-99
تكوين الأطراف لـ AD642SH (حزمة 8-pin hermetically sealed metal-can to-99). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD642SH.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AD642SH مناسب لـ 6 التطبيقs: Precision Sensor Signal Conditioning, Current-to-Voltage Conversion, Matched Dual-Channel Measurement, Precision Active Filtering, Audio and Communication Preamplification, Test and Measurement Front Ends.
Precision Sensor Signal Conditioning
The AD642SH is well suited to conditioning signals from high-impedance sensors because its dual BiFET inputs provide a maximum warmed-up input bias current of 35 pA. Both channels can process related sensor outputs while retaining the matched offset-voltage and bias-current characteristics of the AD642 family. A practical implementation uses one amplifier for signal amplification and the other for gain or offset compensation. The 1 MHz gain-bandwidth product supports low-to-moderate bandwidth instrumentation, while the 3500 uV maximum offset specification establishes the device's principal accuracy boundary.
موصى به
Current-to-Voltage Conversion
AD642SH can amplify the small voltage produced by a current shunt or current-to-voltage converter, particularly when the source impedance is high. The 35 pA maximum warmed-up bias current minimizes current drawn from the sensed source, and the dual configuration allows the signal amplifier to be paired with a buffer or reference channel. The 1 MHz bandwidth is suitable for laboratory and industrial monitoring circuits that do not require high-speed settling. Designers should confirm the input common-mode range against the shunt voltage and verify output swing at the intended load.
موصى به
Matched Dual-Channel Measurement
The matched channels of the AD642SH are useful when measuring two voltages that require similar amplification and gain. Matching offset voltage and bias current can reduce calibration differences between sensor channels, differential measurements, or paired feedback networks. The device combines this matching with a 1 MHz gain-bandwidth product and low warmed-up bias current. For best results, use symmetrical layouts and resistor networks, avoid excessive source imbalance, and confirm that the selected operating point remains within both amplifiers' common-mode and output limits.
موصى به
Precision Active Filtering
The AD642SH can implement first- and second-order analog filters when component tolerances dominate filter accuracy and low input bias current is important. Its dual channels allow cascaded stages, a Sallen-Key section, or separate filter paths for differential signals. The 3500 uV maximum offset specification and 2 uV p-p input voltage noise are important when filtering small signals, while the 1 MHz gain-bandwidth product establishes the useful bandwidth envelope. Verify noise gain, stability, component tolerance, and maximum output swing for the selected transfer function.
موصى به
Audio and Communication Preamplification
AD642SH is suitable for low-level audio or communication preamplification where low input bias current helps preserve high-impedance source signals. The dual BiFET architecture provides two matched channels for stereo, differential, or auxiliary signal paths. Its 3500 uV maximum offset voltage and 2 uV p-p input voltage noise make channel gain planning important, and the 1 MHz bandwidth is appropriate for many audio-frequency applications. The hermetic TO-99 package can also suit ruggedized analog assemblies where package construction and long-term screening are important considerations.
موصى به
Test and Measurement Front Ends
AD642SH can form the input stage of a bench-top or embedded measurement instrument requiring low bias current and matched dual channels. One channel may amplify the unknown signal while the other monitors a reference or generates a complementary output. The 1 MHz bandwidth supports general-purpose measurement bandwidth, and the hermetically sealed TO-99 package is appropriate for equipment designed around long-lived analog assemblies. Design checks should include source impedance, input bias-current error, offset correction, supply bypassing, output loading, and the manufacturer's recommended compensation for the chosen closed-loop gain.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AD642SH — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AD642JH | AD642KH | AD642LH | AD642SH/883 | AD642SH/883B |
|---|---|---|---|---|---|---|
| Package | TO-99 (8-pin hermetic metal can) | TO-99 (8-pin hermetic metal can) | TO-99 (8-pin hermetic metal can) | TO-99 (8-pin hermetic metal can) | TO-99 (8-pin hermetic metal can) | TO-99 (8-pin hermetic metal can) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Amplifiers | 2 | 2 | 2 | 2 | 2 | 2 |
| Amplifier Technology | Precision dual BiFET | Precision dual BiFET | Precision dual BiFET | Precision dual BiFET | Precision dual BiFET | Precision dual BiFET |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Maximum Offset Voltage | 3500 uV | 3500 uV | 3500 uV | 3500 uV | 3500 uV | 3500 uV |
| Maximum Input Bias Current | 35 pA when warmed up | 35 pA when warmed up | 35 pA when warmed up | 35 pA when warmed up | 35 pA when warmed up | 35 pA when warmed up |
| Screening Designation | Standard AD642SH | AD642JH ordering code | AD642KH ordering code | AD642LH ordering code | 883 screening designation | 883B screening designation |
أبرز الفروقات
- Matched dual BiFET channels in a hermetic package (مقابلAD642JH)
- Low input bias current for high-impedance sources (مقابلAD642SH/883)
- Low-noise precision offset specification (مقابلAD642KH)
ملاحظات التصميم
Route supply and ground connections directly to the AD642SH leads with short paths, and place bypass capacitors near the device and return-current reference points. Keep input nodes compact to minimize leakage and parasitic capacitance. Because the AD642SH uses an 8-pin hermetic TO-99 through-hole package, verify lead spacing and mechanical clearance against the package drawing before preparing the PCB footprint.
Use the manufacturer's recommended compensation for the selected closed-loop gain and verify stability with the actual source impedance, load, and PCB parasitics. The 1 MHz gain-bandwidth product requires attention when noise gain rises above unity. Avoid long high-impedance input traces, and maintain symmetrical routing when both channels participate in a matched measurement.
Estimate total dissipation for both amplifier channels using the actual supply voltage, quiescent current, output swing, and load current. Compare the resulting junction temperature with the device rating under the maximum expected ambient temperature. The hermetic metal can and through-hole leads provide thermal paths, but copper area and airflow still influence performance and should be checked in the assembled enclosure.
Do not treat AD642SH, AD642SH/883, and AD642SH/883B as identical procurement lines. Suffix changes can alter screening, temperature, or qualification requirements even when the package and core amplifier family are unchanged. For every proposed replacement, compare the complete ordering table, pin description, absolute maximum ratings, electrical characteristics, and operating-temperature grade before approving it as a drop-in part.
معلومات الامتثال
No specific RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact AD642SH ordering code.