AD9814JR - 14-Bit 10 MSPS 3-Channel CCD Signal Processor | Analog Devices
MPN: AD9814JR ✓ نشطAD9814JR نظرة عامة
A CCD analog front end is an integrated circuit that converts charge generated by a CCD imaging sensor into digital image data. It performs functions such as correlated double sampling, gain control, offset adjustment, clamping, and analog-to-digital conversion. Within the broader hierarchy, the AD9814 is an analog front end, an interface IC, a data-conversion device, and ultimately a semiconductor designed specifically for electronic imaging systems.
The AD9814JR's primary features include 14-bit resolution, operation to 10 MSPS in three-channel mode, operation to 7 MSPS in single-channel mode, guaranteed no missing codes, 1x to 6x programmable gain, 300 mV programmable input offset, and an input clamp. These controls allow one device to condition signals from multiple CCD channels while supporting different analog signal levels without requiring a separate converter for every color channel.
At the core of the device is a 10 MSPS, 14-bit sampling architecture with three parallel signal-processing channels. Correlated double sampling reduces reset noise and low-frequency offset, while programmable gain and offset establish the signal range before conversion. The byte-wide output format and programmable serial interface simplify connection to image sensors, digital cameras, and embedded imaging controllers when the appropriate clock, synchronization, and data-capture circuitry is implemented.
Typical uses include consumer and industrial digital cameras, color line-scan imaging systems, machine-vision equipment, scientific cameras, and other CCD-based imaging products. The three-channel architecture is particularly suitable for trilinear color sensors because red, green, and blue outputs can be sampled and conditioned in a coordinated analog front end. The 28-pin SOIC package also supports conventional PCB assembly and inspection methods.
For reliable system design, follow the AD9814 datasheet for analog input routing, bypass-capacitor placement, clock timing, digital-interface levels, and the complete 28-pin assignment. Keep high-speed output traces short, provide a clean return path, and use the specified voltage levels and timing margins when connecting the serial interface to an image processor or FPGA.
This product page combines the core electrical characteristics, application guidance, pin-package information, sourcing instructions, and validated replacement analysis. It is designed to help engineers move from CCD sensor selection through analog-front-end design, PCB implementation, production sourcing, and system validation.
بدائل مباشرة لـ AD9814JR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
AD9814
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
AD9814JR الحدود القصوى والخصائص الكهربائية
| ADC Resolution | 14 bit |
| معدل أخذ العينات | 10 MSPS |
| Signal Processing Channels | 3 channels |
| Single-Channel Sampling Rate | 7 MSPS |
| Programmable Gain Range | 1x to 6x |
| Programmable Offset | 300 mV |
| Input Clamp | Present |
| Correlated Double Sampling | Supported |
| Missing Codes | No missing codes guaranteed |
| جهد التغذية | 5 V |
| Output Format | Byte-wide parallel format |
| Digital Interface | Programmable serial interface |
| العلبة | 28-pin SOIC wide |
| نوع التركيب | Surface mount |
| Device Type | CCD signal processor and analog front end |
دليل تكوين أطراف AD9814JR 28-pin soic wide
تكوين الأطراف لـ AD9814JR (حزمة 28-pin soic wide). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD9814JR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AD9814JR مناسب لـ 6 التطبيقs: Trilinear Color CCD Cameras, Industrial Line-Scan Imaging, Machine-Vision Cameras, Scientific CCD Cameras, Consumer Digital Imaging, Security and Surveillance Imaging.
Trilinear Color CCD Cameras
The AD9814JR fits trilinear color CCD cameras because its three-channel architecture can sample and condition red, green, and blue outputs in one package. Each channel supports 1x-to-6x programmable gain, 300 mV programmable offset, correlated double sampling, and 14-bit conversion at up to 10 MSPS in three-channel mode. Place the device close to the CCD output source and preserve the sensor manufacturer’s recommended signal conditioning. The principal design consideration is channel timing: the three paths must receive appropriately phased clocks and valid samples, while the programmable offset and gain must remain within the usable analog input range.
Industrial Line-Scan Imaging
The AD9814JR suits industrial line-scan imaging systems that require deterministic analog sampling and digital image data from CCD sensors. Its 10 MSPS three-channel mode supports color line-scan architectures, while correlated double sampling helps suppress reset-related noise before conversion. Programmable gain and 300 mV offset adjustment allow different sensor outputs to be normalized without fixed external attenuation networks. At line rates, clock and data timing become critical; use short, controlled routes for analog inputs, maintain the documented bypass arrangement, and route serial or byte-wide outputs away from sensitive CCD clock lines to reduce coupling.
Machine-Vision Cameras
The AD9814JR is appropriate for machine-vision cameras where a CCD sensor requires integrated gain, offset, sampling, and conversion before data reaches a digital processor. The 14-bit resolution provides finer quantization than an 8- or 12-bit imaging chain, and three-channel operation can serve RGB trilinear sensors without three separate converters. The integrated 1x-to-6x gain control and 300 mV programmable offset also simplify front-end normalization. Designers should still budget carefully for connector loss, cable capacitance, and CCD output drive strength, because the signal integrity at the AD9814JR input determines whether the converter’s nominal resolution can be used effectively.
Scientific CCD Cameras
The AD9814JR can serve scientific and instrumentation cameras that use trilinear color CCD arrays and require a compact 14-bit analog front end. Its three-channel architecture, correlated double sampling, and programmable gain and offset support controlled acquisition from repeated imaging frames. The 10 MSPS conversion capability accommodates moderate-speed image acquisition while preserving a single 28-pin SOIC implementation. For scientific imaging, calibrate gain and offset against known reference conditions and evaluate dark-frame and fixed-pattern noise at the system level. The analog front end reduces some sensor effects, but it does not replace optical calibration, stable reference generation, or careful clock synchronization.
Consumer Digital Imaging
The AD9814JR is applicable to CCD-based consumer imaging products requiring three-channel signal conditioning and 14-bit conversion. Its integrated architecture reduces the number of separate analog front-end functions needed for red, green, and blue CCD outputs, while programmable gain and offset accommodate channel variations. The 10 MSPS three-channel rate supports moderate frame-rate designs and the 28-pin SOIC package is compatible with conventional surface-mount assembly. Product developers should check the sensor vendor’s required voltage, bias, clock phase, and grounding arrangement, because successful imaging depends on the complete CCD-to-processor signal chain rather than on converter specifications alone.
Security and Surveillance Imaging
The AD9814JR can support CCD-based security cameras that use a trilinear color sensor and require digitized, channel-synchronized imagery. Its 14-bit conversion and three-channel sampling rate provide a practical interface between CCD outputs and a downstream image processor, while correlated double sampling helps control reset noise. Programmable gain and offset can compensate for channel-level variation under different illumination conditions. In surveillance systems, validate latency between sensor readout and image processing, maintain clean power and ground distribution, and keep sensitive analog inputs away from switching regulators and high-speed digital return currents to preserve usable image quality.
بيانات مرجعية هندسية لـ AD9814JR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AD9814 |
|---|---|---|
| ADC Resolution | 14 bit | 14 bit |
| Three-Channel Sampling Rate | 10 MSPS | 10 MSPS |
| Single-Channel Sampling Rate | 7 MSPS | 7 MSPS |
| Signal Processing Channels | 3 channels | 3 channels |
| Programmable Gain | 1x to 6x | 1x to 6x |
| Programmable Offset | 300 mV | 300 mV |
| Supply Voltage | 5 V | 5 V |
| Package | 28-pin SOIC wide | 28-pin SOIC wide |
| Brand | Analog Devices | Analog Devices |
| Output Format | Byte-wide parallel format | Byte-wide parallel format |
أبرز الفروقات
- Integrated three-channel CCD conditioning (مقابلAD9814)
- Programmable analog normalization (مقابلAD9814)
- CCD-specific sampling functions (مقابلAD9814)
ملاحظات التصميم
Route each CCD channel directly to its assigned AD9814JR input with short traces and a continuous ground reference. Place input and bypass components at the pins specified by the manufacturer application guidance, and avoid routing analog inputs beneath digital clock or byte-output nets. A compact signal path reduces capacitive loading, crosstalk, and sensitivity to cable and connector noise.
Treat CCD clocking, conversion timing, and output capture as one timing chain. Use the manufacturer timing diagrams to establish clock phase, acquisition time, settling margin, and data-capture timing. Where the interface uses a serial mode, keep clock and data traces short, provide a continuous reference plane, and validate the arrangement with signal-integrity simulation or measured eye timing.
Use the specified 5 V supply and the decoupling arrangement from the manufacturer datasheet. Place the smallest high-frequency bypass capacitor at the appropriate supply pin and add bulk capacitance according to the recommended application circuit. Verify that CCD bias supplies, analog input levels, and digital interface levels remain within their stated limits under startup, saturation, and full-frame acquisition conditions.
Do not treat the three channels as independent converters with unrelated acquisition timing. Program each channel’s gain and offset from calibration values, preserve the correct sampling sequence, and confirm that the CCD output amplitude does not clip the analog input range. Also verify the missing-code specification under the intended clock and supply conditions rather than assuming it applies to every operating arrangement.
معلومات الامتثال
The product is an industrial CCD imaging analog front end rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.