ADA4896-2ARMZ-RL7 - Dual Low Noise RRO Op Amp | Analog Devices
MPN: ADA4896-2ARMZ-RL7 ✓ نشطADA4896-2ARMZ-RL7 نظرة عامة
What is a voltage feedback amplifier? A voltage feedback amplifier is a type of operational amplifier where the output voltage is fed back to the inverting input through a feedback network. It is characterized by its high input impedance, low output impedance, and high open-loop gain. Voltage feedback amplifiers are widely used in signal conditioning, filtering, and buffering applications due to their ease of use and stability. They form a subset of operational amplifiers, which are fundamental building blocks in analog signal processing.
Key features of the ADA4896-2 include a low 1/f noise of 2.4 nV/√Hz at 10 Hz, a spurious-free dynamic range (SFDR) of -80 dBc at 2 MHz, and a unity-gain bandwidth of 230 MHz. The rail-to-rail output stage allows maximum output swing, and the low quiescent current makes it ideal for battery-powered systems. The amplifier also features a wide supply voltage range and is specified for operation over the industrial temperature range of -40°C to +125°C.
The ADA4896-2 uses a complementary bipolar process technology, providing excellent DC precision and AC performance. The device is designed to drive high-speed ADCs and other capacitive loads, with a slew rate of 120 V/µs. Its low distortion and low noise make it suitable for high-performance signal chains.
Typical applications include ADC drivers, active filters, instrumentation, and portable audio equipment. The low noise and high bandwidth make it ideal for medical imaging, communications, and test and measurement systems.
When designing with the ADA4896-2, ensure proper power supply decoupling with 0.1 µF capacitors close to the supply pins. The rail-to-rail output stage requires careful consideration of the load impedance to maintain stability.
بدائل مباشرة لـ ADA4896-2ARMZ-RL7 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ADA4896-2ARMZ-RL7 (نفس عامل الشكل والبصمة) — يختلف في Slew Rate, Supply Voltage Range, Quiescent Current per Amplifier, Input Bias Current, Input Voltage Noise Density.
ADA4896-2ARMZ-R7
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ADA4896-2ARMZ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADA4897-2ARMZ-RL
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ADA4807-2ARMZ-RL7
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ADA4805-2ARMZ-RL7
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ADA4806-2ARMZ-RL7
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ADA4896-2ARMZ-RL7 الحدود القصوى والخصائص الكهربائية
| Number of Channels | 2 |
| Amplifier Type | Voltage Feedback |
| نوع الخرج | Rail-to-Rail |
| Supply Voltage Range | 3 V to 10 V (±1.5 V to ±5 V) |
| Quiescent Current per Amplifier | 3 mA |
| 1/f Noise at 10 Hz | 2.4 nV/√Hz |
| Spurious-Free Dynamic Range (SFDR) | -80 dBc at 2 MHz |
| Unity-Gain Bandwidth | 230 MHz |
| Slew Rate | 120 V/µs |
| نطاق درجة حرارة التشغيل | -40°C to +125°C |
| العلبة | 8-MSOP |
| نوع التركيب | Surface Mount |
| حالة RoHS | Compliant |
| REACH Status | Compliant |
| Lead-Free | Yes |
تكوين أطراف ADA4896-2ARMZ-RL7
| دبوس 1 | OUT A — Output of amplifier A |
| دبوس 2 | -IN A — Inverting input of amplifier A |
| دبوس 3 | +IN A — Non-inverting input of amplifier A |
| دبوس 4 | V- — Negative supply voltage |
| دبوس 5 | +IN B — Non-inverting input of amplifier B |
| دبوس 6 | -IN B — Inverting input of amplifier B |
| دبوس 7 | OUT B — Output of amplifier B |
| دبوس 8 | V+ — Positive supply voltage |
التطبيقات النموذجية
ADA4896-2ARMZ-RL7 مناسب لـ 6 التطبيقs: ADC Driver, Active Filter, Instrumentation, Portable Audio, Communications, Medical Imaging.
ADC Driver
The ADA4896-2ARMZ-RL7 is ideal for driving high-speed ADCs due to its low noise, high bandwidth, and rail-to-rail output. Its SFDR of -80 dBc at 2 MHz ensures minimal distortion, preserving the ADC's dynamic range. The amplifier's low quiescent current is beneficial in multi-channel systems where power dissipation is a concern. When driving capacitive loads, a series resistor may be needed to maintain stability. The wide supply range allows compatibility with various ADC supply voltages.
موصى به
Active Filter
The ADA4896-2ARMZ-RL7 is well-suited for active filter applications due to its high unity-gain bandwidth of 230 MHz and low noise. It can be used in low-pass, high-pass, and band-pass filters in communication and instrumentation systems. The rail-to-rail output allows maximum signal swing, and the low quiescent current makes it efficient for battery-powered filters. The amplifier's stability at unity gain simplifies filter design, and its low distortion ensures signal fidelity.
موصى به
Instrumentation
In instrumentation, the ADA4896-2ARMZ-RL7 provides low noise and high bandwidth for precise signal conditioning. Its 1/f noise of 2.4 nV/√Hz at 10 Hz is critical for low-frequency measurements, and the wide supply range supports various sensor interfaces. The dual-channel configuration is useful for differential measurements. The amplifier's low power consumption extends battery life in portable instruments, and its small MSOP package saves board space.
موصى به
Portable Audio
The ADA4896-2ARMZ-RL7 is suitable for portable audio applications due to its low noise and low power consumption. It can be used in headphone amplifiers, audio codec output buffers, and active filters. The rail-to-rail output maximizes dynamic range, and the low quiescent current extends battery life. The amplifier's high bandwidth ensures accurate reproduction of audio signals, and its small package is ideal for compact devices.
موصى به
Communications
In communications systems, the ADA4896-2ARMZ-RL7 is used in IF and baseband signal chains. Its high bandwidth and low distortion support high-speed data transmission, and the low noise improves signal-to-noise ratio. The amplifier can drive mixers, filters, and ADCs in transceivers. The wide supply range allows integration with various RF front-end components, and the low power consumption is advantageous in battery-operated communication devices.
موصى به
Medical Imaging
The ADA4896-2ARMZ-RL7 is used in medical imaging equipment such as ultrasound and MRI systems. Its low noise and high bandwidth are essential for processing weak signals from sensors. The amplifier's low power consumption is beneficial in portable medical devices, and its small package allows high-density designs. The wide supply range supports various power architectures, and the rail-to-rail output ensures maximum signal fidelity.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADA4896-2ARMZ-RL7 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADA4896-2ARMZ-R7 | ADA4896-2ARMZ | ADA4897-2ARMZ-RL | ADA4807-2ARMZ-RL7 |
|---|---|---|---|---|---|
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 3 V to 10 V | 3 V to 10 V | 3 V to 10 V | 3 V to 10 V | 2.7 V to 5 V |
| Quiescent Current per Amplifier | 3 mA | 3 mA | 3 mA | 3.5 mA | 1 mA |
| 1/f Noise at 10 Hz | 2.4 nV/√Hz | 2.4 nV/√Hz | 2.4 nV/√Hz | 1.8 nV/√Hz | 3.1 nV/√Hz |
| Unity-Gain Bandwidth | 230 MHz | 230 MHz | 230 MHz | 310 MHz | 180 MHz |
| Slew Rate | 120 V/µs | 120 V/µs | 120 V/µs | 170 V/µs | 80 V/µs |
أبرز الفروقات
- Low quiescent current of 3 mA per amplifier (مقابلADA4897-2ARMZ-RL)
- Lower 1/f noise of 2.4 nV/√Hz at 10 Hz (مقابلADA4807-2ARMZ-RL7)
- Higher unity-gain bandwidth of 230 MHz (مقابلADA4807-2ARMZ-RL7)
ملاحظات التصميم
The ADA4896-2ARMZ-RL7 operates from 3 V to 10 V. Ensure the supply voltage is within this range and properly decoupled. Use 0.1 µF ceramic capacitors close to the V+ and V- pins to minimize noise and improve stability. For optimal performance, a 10 µF tantalum capacitor in parallel is recommended for lower frequency decoupling.
For high-speed applications, place the ADA4896-2ARMZ-RL7 close to the signal source and ADC to minimize trace inductance. Use a ground plane to reduce noise and ensure a low-impedance return path. Keep feedback resistors and capacitors as close to the amplifier as possible to reduce parasitic capacitance and inductance.
The ADA4896-2ARMZ-RL7 is unity-gain stable, but driving large capacitive loads can cause instability. Add a series resistor (e.g., 50 Ω) between the output and the capacitive load to maintain stability. Also, avoid exceeding the absolute maximum supply voltage of 12 V to prevent damage.
معلومات الامتثال
RoHS and REACH compliance confirmed from Analog Devices product page. AEC-Q100 not applicable as this is not an automotive-grade part.
