Analog Devices

ADF4106SRU-EP - 6 GHz PLL Frequency Synthesizer | Analog Devices

MPN: ADF4106SRU-EP ✗ انتهى عمره الإنتاجي
16-lead TSSOP Package 6 GHz Speed
الحد الأدنى للطلب: 1 |

ADF4106SRU-EP نظرة عامة

The Analog Devices ADF4106SRU-EP is a frequency synthesizer integrated circuit with a 6 GHz maximum operating frequency, designed for phase-locked-loop signal generation in wireless transmitters, wireless receivers, RF conversion stages, and instrumentation. The device is supplied in a 16-lead TSSOP package measuring approximately 4.40 mm in width. Its architecture supports programmable frequency synthesis, phase detection, reference division, counter programming, and RF signal generation within one compact surface-mount package.

A PLL frequency synthesizer is a clock-and-timing IC that combines a phase-frequency detector, precision charge pump, programmable counters, reference divider, and voltage-controlled oscillator or prescaler. This PLL structure belongs to the frequency synthesizer hierarchy, where it extends beyond a fixed clock generator by allowing output frequency to be programmed through digital counter and divider settings. It is commonly used when a system requires accurate, adjustable, or fractional-N local oscillator signals.

The ADF4106SRU-EP supports operation up to 6 GHz and includes programmable A and B counters, a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump. The 16-lead TSSOP package provides a compact PCB footprint for RF and communications equipment. The listed input and output data include a 20 MHz input and 325 MHz output, making the part relevant to applications requiring locally generated RF signals above the direct reference frequency.

The frequency synthesizer architecture is suited to integer-N and fractional-N implementations. Programmable counters establish the required multiplication ratio, while the phase-frequency detector and charge pump drive the loop filter and oscillator. Designers should select reference, divider, loop-filter, and output-routing values that maintain lock margin while controlling phase noise, spur performance, tuning range, and reference-referred phase noise.

Typical applications include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion sections, industrial RF test equipment, communication infrastructure, and other systems needing a programmable oscillator. The 6 GHz operating ceiling allows the device to address microwave and wireless bands when paired with suitable external loop-filter and RF components.

The principal design consideration is loop-filter implementation because the filter directly influences lock range, phase noise, reference spurs, and recovery time. Component tolerances, reference-clock accuracy, charge-pump current settings, counter values, and PCB cleanliness should be evaluated together rather than optimized independently.

This product record combines the confirmed 6 GHz frequency capability, 16-lead TSSOP construction, lifecycle information, direct replacement guidance, comparison parameters, and practical RF design considerations to support component selection and board-level implementation.

بدائل مباشرة لـ ADF4106SRU-EP — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADF4106SRU-EP (نفس عامل الشكل والبصمة) — يختلف في Charge Pump, Device Type, Package, Phase-Frequency Detector.

Analog Devices
Charge Pump: Precision programmable type
Device Type: Integer-N frequency synthesizer / phase-locked loop
Package: 16-lead TSSOP, 4.40 mm width
قارن مع ADF4106SRU-EP →

ADF4106SRUZ-EP

✅ بديل مباشر
Analog Devices
📦 16-lead TSSOP
Integer-N frequency synthesizer / phase-locked loop · 6 GHz · Programmable · Programmable dual-modulus P/P+1 · 6-bit programmable · 21-bit programmable · Low-noise digital type · Precision programmable type

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADF4106SRU-EP-R7

✅ بديل مباشر
📦 16-lead TSSOP
Identical 16-lead TSSOP footprint with 0% package difference; change is reel-packaged ordering form

📋 بديل مرجعي (غير موجود في الكتالوج)

ADF4106SRU-EP المواصفات

Device Type Frequency synthesizer IC
Maximum Frequency 6 GHz
عدد المخارج 1
العلبة 16-lead TSSOP
Package Width 4.40 mm
Input Frequency 20 MHz
Output Frequency 325 MHz
PLL Architecture Integer-N and fractional-N frequency synthesis
Programmable A Counter Programmable
Programmable B Counter Programmable
Reference Divider Programmable
Phase-Frequency Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
نوع التركيب Surface mount
RoHS Compliance Compliant
حالة دورة الحياة Obsolete

دليل تكوين أطراف ADF4106SRU-EP 4.40 mm

تكوين الأطراف لـ ADF4106SRU-EP (حزمة 4.40 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 4.40 mm لـ ADF4106SRU-EP

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADF4106SRU-EP.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADF4106SRU-EP مناسب لـ 6 التطبيقs: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Up-Conversion and Down-Conversion, Industrial RF Test Equipment, Communications Infrastructure RF Modules, Frequency-Selective Measurement Setups.

🌐

Wireless Receiver Local Oscillator

The ADF4106SRU-EP fits wireless receiver front ends that require a programmable local oscillator for RF down-conversion. Its 6 GHz maximum operating frequency covers common wireless and microwave receiver bands, while the programmable A counter, B counter, and reference divider allow the synthesis ratio to be set from a stable reference. The 16-lead TSSOP package also provides a compact implementation for receiver boards with limited routing area. According to the Analog Devices manufacturer datasheet, the part is intended for local oscillators in wireless receivers. Design verification should include lock-range analysis, phase-noise margin, reference-spur testing, and confirmation that the 20 MHz input and configured division ratios support the target channel plan.

📡

Wireless Transmitter Up-Conversion

The ADF4106SRU-EP can generate the adjustable local-oscillator signal used in a wireless transmitter up-conversion chain. A maximum frequency of 6 GHz supports RF designs operating within microwave and wireless bands, while the programmable divider and counter architecture permits channel-specific frequency settings. The 16-lead TSSOP package helps keep the synthesizer close to the mixer and feedback network, which can simplify RF layout. The Analog Devices manufacturer datasheet identifies wireless transmitters as a target application. Before implementation, model reference multiplication, divider ratios, loop bandwidth, and spur behavior across temperature, and verify the chosen output network against the intended channel and conducted or radiated emission limits.

📶

RF Up-Conversion and Down-Conversion

The ADF4106SRU-EP is appropriate for RF conversion systems that need a programmable oscillator rather than a fixed-frequency source. Its 6 GHz ceiling supports local-oscillator generation near the RF operating band, and the programmable reference divider plus A and B counters permit multiple division ratios for channel plans. The integrated phase-frequency detector and precision charge pump provide the core PLL functions needed for closed-loop tuning. According to the Analog Devices manufacturer datasheet, the device can implement local oscillators in both up-conversion and down-conversion sections. Critical engineering work includes selecting the prescaler arrangement, calculating the loop filter, controlling reference spurs, and ensuring the external oscillator and matching network preserve phase-noise performance.

🏭

Industrial RF Test Equipment

The ADF4106SRU-EP can serve as the programmable signal source within industrial RF test equipment requiring accurate local-oscillator generation. The 6 GHz operating limit supports test products aimed at wireless infrastructure, microwave components, and related communications equipment. Programmable counters and reference division make it useful for changing test frequencies without replacing multiple fixed oscillators, while the 16-lead TSSOP package supports compact instrument boards. The Analog Devices manufacturer datasheet positions the part for wireless RF signal-generation contexts. For production test equipment, characterize lock time and phase noise over the complete temperature range, account for reference-clock accuracy, and use shielded, controlled-impedance routing to avoid measurement errors from the synthesizer’s switching activity.

🖥️

Communications Infrastructure RF Modules

The ADF4106SRU-EP is suitable for communications infrastructure modules that require an adjustable local oscillator for RF signal conversion. A 6 GHz maximum frequency aligns with many microwave communication paths, while programmable counter and divider settings support configurable synthesis ratios. The 16-lead TSSOP package allows placement near the RF front end and reduces the footprint compared with larger discrete oscillator assemblies. The Analog Devices manufacturer datasheet supports use of the device as a local oscillator in wireless transmitters and receivers. System designers should select a low-noise reference, calculate loop bandwidth from phase-noise and lock-time objectives, and validate conducted spurs and output isolation after integration into the module’s power and thermal environment.

🔧

Frequency-Selective Measurement Setups

The ADF4106SRU-EP can support measurement setups that require a programmable RF reference for mixers, filters, or frequency-conversion fixtures. Its 6 GHz frequency capability enables test signals for modern wireless and microwave components, and the programmable synthesis architecture allows multiple output settings to be evaluated with one board design. The 16-lead TSSOP package is practical for compact fixtures and laboratory modules. The Analog Devices manufacturer datasheet identifies the device as suitable for local-oscillator generation in wireless conversion paths. Calibration quality will depend on the reference source, loop-filter implementation, output matching, and measurement-plane de-embedding, so these factors should be characterized together before using the output as a precision traceable reference.

ملخص المنتجات الموصى بها

ADF4106SRUZ-EP Analog Devices يُستخدم في: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Up-Conversion and Down-Conversion, Industrial RF Test Equipment, Communications Infrastructure RF Modules, Frequency-Selective Measurement Setups ADF4106SRU-EP-R7 Direct reel-packaged equivalent for receiver production يُستخدم في: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Up-Conversion and Down-Conversion, Industrial RF Test Equipment, Communications Infrastructure RF Modules, Frequency-Selective Measurement Setups
What is the ADF4106SRU-EP?
The ADF4106SRU-EP is an Analog Devices frequency synthesizer IC with a maximum operating frequency of 6 GHz, one output, and a 16-lead TSSOP package. According to the Analog Devices manufacturer datasheet, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and dual-modulus prescaling functions. It is intended for programmable local-oscillator generation in wireless receivers and transmitters.
What are the key specifications of ADF4106SRU-EP that engineers should know?
The principal ADF4106SRU-EP specifications are a 6 GHz maximum frequency, one RF output, a 16-lead TSSOP package, and a package width of approximately 4.40 mm. The Analog Devices manufacturer datasheet also identifies programmable A and B counters, a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump. The listed 20 MHz input and 325 MHz output values provide additional reference points for initial frequency-plan calculations.
Where can I download the ADF4106SRU-EP datasheet PDF?
The ADF4106SRU-EP datasheet can be accessed through the product links listed on this page, including the Analog Devices component search results and the detailed product listing. According to the manufacturer datasheet information, the document describes the phase-frequency detector, precision charge pump, programmable counters, reference divider, prescaler, register programming, and recommended application circuits. Use the Analog Devices document for final pin assignments, electrical limits, register definitions, and reference-design details.
Where can I find the ADF4106SRU-EP pinout?
The ADF4106SRU-EP pinout is identified by the Analog Devices manufacturer datasheet for the 16-lead TSSOP package. The package is approximately 4.40 mm wide and includes the power, ground, reference, clock, data, and control connections required by the PLL and serial programming interface. Use the pin-description and package-drawing tables in the manufacturer datasheet when assigning PCB tracks, especially for exposed supply and ground requirements.
Is ADF4106SRU-EP suitable for RF receiver and transmitter local oscillators?
The ADF4106SRU-EP is suitable for RF local-oscillator generation in wireless receivers and transmitters. According to the Analog Devices manufacturer datasheet, its 6 GHz frequency capability and programmable synthesis architecture support adjustable oscillator output for RF up-conversion and down-conversion stages. The implementation still requires a suitable reference source, loop filter, external oscillator or prescaler interface, and output matching network for the target band.
Is ADF4106SRU-EP the same as ADF4106SRUZ-EP?
The ADF4106SRUZ-EP is identified as a RoHS-compliant version of the ADF4106SRU-EP in the identical 16-lead TSSOP package. That package and compliance information make it the closest same-brand replacement identified for direct evaluation. Before production substitution, confirm the temperature range, electrical limits, register behavior, qualification status, and sourcing constraints against the original design requirements.
What is the best drop-in replacement for ADF4106SRU-EP?
The closest identified drop-in replacement is the Analog Devices ADF4106SRUZ-EP, which uses the identical 16-lead TSSOP package and is described as a RoHS-compliant version of the same component. The reel-packaged ADF4106SRU-EP-R7 is also identified as a direct equivalent. Confirm the required package variant and all ordering qualifications before selecting a replacement for an obsolete production design.
What can replace ADF4106SRU-EP on the same PCB?
The ADF4106SRUZ-EP can replace the ADF4106SRU-EP on the same 16-lead TSSOP footprint according to direct replacement guidance. The ADF4106SRU-EP-R7 is also described as a direct reel-packaged equivalent. Because the original device is obsolete, verify operating-temperature grade, production status, datasheet limits, and register compatibility with the original qualification specification before releasing a replacement to manufacturing.
When should I choose ADF4106SRU-EP over a newer PLL synthesizer?
Choose the ADF4106SRU-EP only when preserving an existing 16-lead TSSOP design has greater value than adopting a currently available device. Its 6 GHz capability and programmable PLL architecture support established RF local-oscillator designs, but obsolescence creates lifecycle risk for new production. For a new design, compare a current synthesizer against lock range, phase noise, reference spur performance, register interface, supply voltage, and board area.
Is ADF4106SRU-EP suitable for a 325 MHz output application?
The ADF4106SRU-EP is listed with a 325 MHz output frequency, making it directly relevant to designs operating at that frequency. According to the Analog Devices manufacturer datasheet, the part can implement programmable local oscillators for wireless conversion stages. The exact counter, divider, prescaler, reference, and loop-filter settings must be calculated for the target output and verified for lock and phase-noise performance.
How is the loop filter selected for ADF4106SRU-EP?
The loop filter should be selected from the intended reference frequency, divider settings, charge-pump configuration, target lock range, and phase-noise requirement. According to the Analog Devices manufacturer datasheet application guidance, loop-filter components materially affect loop dynamics and reference spur performance. Include capacitor and resistor tolerances in the design and verify both acquisition performance and phase noise on the final board.
What are the power and thermal considerations for ADF4106SRU-EP?
Thermal design begins with the actual supply voltage, digital-interface activity, output-buffer loading, and ambient temperature of the assembled system. According to the Analog Devices manufacturer datasheet, this is a 16-lead TSSOP frequency synthesizer intended for surface-mount implementation. Use the package power data and application guidance to calculate junction temperature, and provide uninterrupted supply and ground connections to avoid additional heating or instability.
What is the lifecycle status of ADF4106SRU-EP?
The ADF4106SRU-EP is currently listed as obsolete. The manufacturer-family replacement guidance identifies the ADF4106SRUZ-EP and ADF4106SRU-EP-R7 as alternatives for the identical 16-lead TSSOP footprint. For an existing design, review the change-control and end-of-life process, then verify the replacement’s lifecycle, operating-temperature grade, qualification, and electrical characteristics before updating the BOM.
Where to buy ADF4106SRU-EP online?
Use the Request a Quote form on this page to request availability, lead time, and a purchase quotation for the ADF4106SRU-EP. Because the part is listed as obsolete, request the specific package and qualification requirements along with any final-time-buy or obsolete-inventory terms. Include your required quantity, target date, approved-vendor-list status, and documentation requirements in the request.
What is the price and lead time for ADF4106SRU-EP?
The current commercial terms for the obsolete ADF4106SRU-EP should be requested through the Request a Quote form on this page. Include the required quantity, reel or other packaging format, target delivery date, and any certificate-of-conformance or traceability requirements. The listing identifies the device as obsolete, so availability and lead time may depend on remaining qualified inventory rather than routine production scheduling.
Is ADF4106SRU-EP in stock?
Stock for the ADF4106SRU-EP should be confirmed through the Request a Quote form on this page rather than inferred from a generic product listing. The part is listed as obsolete, and some result pages report that it can ship immediately while others describe replacement sourcing. A formal quotation should identify the available suffix, quantity, manufacturing origin, traceability, and delivery schedule.
What cross-brand equivalent is available for ADF4106SRU-EP?
No verified cross-brand drop-in equivalent is established for the ADF4106SRU-EP. The identified replacements are Analog Devices parts using the same 16-lead TSSOP family, including the ADF4106SRUZ-EP and ADF4106SRU-EP-R7. A different manufacturer’s PLL may offer similar radio functionality, but equivalence cannot be claimed without verified pin compatibility, electrical ratings, register mapping, and reference-divider behavior.

بيانات مرجعية هندسية لـ ADF4106SRU-EP — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADF4106SRU-EP only for an existing design that depends on its 6 GHz PLL architecture, 16-lead TSSOP footprint, and established register programming. For maintaining an obsolete production design, ADF4106SRUZ-EP is the preferred same-footprint option because it is identified as a RoHS-compliant version of the same component. ADF4106SRU-EP-R7 is appropriate when the reel-packaged ordering form matches the assembly plan. Neither alternative should be selected solely from package appearance: confirm operating-temperature grade, electrical limits, qualification, lifecycle, and register compatibility. For a new RF design, compare this obsolete family with currently active synthesizers because supply continuity, phase noise, reference-spur performance, lock time, and software support may justify a board-level redesign.

المقارنة مع البدائل

المعامل هذا المنتج ADF4106SRUZ-EP ADF4106SRU-EP-R7
Brand Analog Devices Analog Devices Analog Devices
Package 16-lead TSSOP 16-lead TSSOP - same package 16-lead TSSOP - same package
Ordering Form ADF4106SRU-EP ADF4106SRUZ-EP ADF4106SRU-EP-R7 reel-packaged form

أبرز الفروقات

  • Closest same-family replacement preserves the original PCB footprint (مقابلADF4106SRUZ-EP)
  • Production ordering form is available without changing the land pattern (مقابلADF4106SRU-EP-R7)
  • Same-family alternatives preserve register-based PLL architecture (مقابلADF4106SRUZ-EP)

ملاحظات التصميم

Do not treat a PLL synthesizer as a fixed oscillator. Counter, reference-divider, and prescaler settings determine the requested output, and an incorrect ratio can leave the loop unable to lock at the intended frequency. Build a frequency-plan table containing the reference frequency, divider values, target output, lock range, and resulting multiplication ratio. Verify each value in the manufacturer register definitions and confirm the selected alternative retains the same programming behavior before updating an obsolete design.

Place the loop-filter components close to the charge-pump and ground connections, and route the reference and RF paths away from digital programming lines. The 16-lead TSSOP footprint demands careful escape routing, but clean layout is especially important because reference-clock coupling and ground-current disturbance can increase phase noise and spurs. Use a continuous ground path, decouple supply pins locally, and follow the exact pin-description table in the manufacturer datasheet for the selected package.

Size the supply network for the synthesizer’s digital activity and the operating requirements of the associated external oscillator or RF circuitry. Keep regulator and reference-decoupling paths short, and compare the final board’s measured supply ripple with the PLL phase-noise and lock-performance objectives. For an obsolete part replacement, inspect the full operating-temperature and supply-voltage limits rather than assuming that an identical package preserves every electrical condition.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The ADF4106SRUZ-EP is specifically identified as the RoHS-compliant version of the same component in the identical 16-lead TSSOP package.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADF4106SRU-EP datasheet ADF4106SRU-EP pinout ADF4106SRU-EP datasheet pdf ADF4106SRU-EP equivalent ADF4106SRU-EP replacement ADF4106SRU-EP cross reference ADF4106SRU-EP footprint ADF4106SRU-EP price ADF4106SRU-EP stock Analog Devices ADF4106SRU-EP ADF4106SRU-EP 6 GHz PLL ADF4106SRU-EP TSSOP-16 ADF4106SRU-EP wireless local oscillator ADF4106SRUZ-EP vs ADF4106SRU-EP ADF4106SRU-EP lead time

المكونات والمصطلحات ذات الصلة

Analog Devices ADF4106SRU-EP ADF4106SRUZ-EP ADF4106SRU-EP-R7 frequency synthesizer IC phase-locked loop PLL integer-N synthesizer fractional-N synthesizer local oscillator clock and timing IC semiconductor phase-frequency detector PFD precision charge pump programmable A counter programmable B counter reference divider dual-modulus prescaler 6 GHz RF synthesis 20 MHz reference input 325 MHz output 16-lead TSSOP TSSOP package family surface-mount package RoHS
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر