Analog Devices

ADV7182ABCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices

MPN: ADV7182ABCPZ-RL ✗ انتهى عمره الإنتاجي
1.71 V to 1.89 V Vdss NTSC, PAL, and SECAM Rds(on) 32-LFCSP, 5 x 5 mm Package
الحد الأدنى للطلب: 1 |

ADV7182ABCPZ-RL نظرة عامة

The Analog Devices ADV7182ABCPZ-RL is a 10-bit SDTV video decoder with differential inputs in a 32-LFCSP 5 x 5 mm package. It detects analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards and converts them into 4:2:2 component-video data. The serial output supports the ITU-R BT.656 interface, while I2C provides configuration and control.

A video decoder is an interface IC that converts composite or component analog video into digital pixel data for processing, display, capture, or transmission. In the system hierarchy, the ADV7182ABCPZ-RL belongs to the video decoder class of interface ICs and bridges legacy analog video sources with digital video processors, LCD controllers, video ASICs, and embedded imaging systems.

The decoder automatically identifies NTSC, PAL, and SECAM analog baseband inputs, reducing the need for separate conversion paths. Its 10-bit conversion resolution preserves more amplitude detail than an 8-bit decoder, while the resulting YCbCr 4:2:2 stream provides the chroma subsampling commonly required by digital video interfaces. Differential inputs are intended for noise-rejecting connections from suitable analog front ends.

The ADV7182A architecture uses a single 10-bit analog-to-digital converter and an on-chip differential input stage. It produces 8-bit-compatible ITU-R BT.656 data, and external horizontal sync, vertical sync, and field signals can supply timing references to LCD controllers and other video ASICs. I2C configuration supports integration into systems where register-based control is more practical than fixed hardware settings.

Typical uses include industrial vision equipment, professional video conversion, surveillance systems, broadcast equipment, medical imaging interfaces, and legacy video capture products. The decoder is particularly useful when a system must accept several international analog video standards and present the result to a digital processing chain without deploying separate decoder boards for each format.

Designers should follow the manufacturer datasheet for the 32-lead LFCSP land pattern, analog input routing, bypass and decoupling capacitors, clock requirements, and register initialization. Differential input layout, grounding, and connector isolation are especially important because video decoding performance can be affected by noise coupling and impedance mismatch.

This page combines the Analog Devices product description, lifecycle designation, package and interface details, equivalent-family guidance, and engineering-oriented comparison information. It also explains where to obtain the datasheet and how to assess replacement options for redesigned or legacy video systems.

بدائل مباشرة لـ ADV7182ABCPZ-RL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ADV7182A

✅ بديل مباشر
📦 32-LFCSP (5x5)
Same pinout and software compatibility as ADV7182; key resolution remains 10 bit and output remains YCbCr 4:2:2, while the exact ordering suffix must be confirmed

📋 بديل مرجعي (غير موجود في الكتالوج)

ADV7182ABCPZ-RL المواصفات

Product Type 10-bit SDTV video decoder
Analog Input Architecture Differential input
Supported Video Standards NTSC, PAL, and SECAM
Output Format YCbCr 4:2:2 component video
Digital Video Interface Serial ITU-R BT.656
Control Interface I2C
ADC Resolution 10 bit
Output Data Resolution 8 bit
ADC Count 1 on-chip 10-bit ADC
جهد التغذية 1.71 V to 1.89 V
العلبة 32-LFCSP, 5 x 5 mm
Total Pin Count 32 pins
External Timing References HS, VS, and FIELD signals supported

دليل تكوين أطراف ADV7182ABCPZ-RL 32-lfcsp, 5 x 5 mm

تكوين الأطراف لـ ADV7182ABCPZ-RL (حزمة 32-lfcsp, 5 x 5 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 32-lfcsp, 5 x 5 mm لـ ADV7182ABCPZ-RL

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADV7182ABCPZ-RL.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADV7182ABCPZ-RL مناسب لـ 6 التطبيقs: Industrial Vision Interfaces, Broadcast Video Conversion, Surveillance Camera Systems, Medical Imaging Video Sources, Legacy Video Capture Cards, Video Test and Measurement.

🏭

Industrial Vision Interfaces

The ADV7182ABCPZ-RL fits industrial vision equipment that must accept camera or monitor outputs using NTSC, PAL, or SECAM. Its automatic standard detection avoids separate decoder channels, while the 10-bit ADC preserves more analog amplitude detail than an 8-bit-only conversion stage. The YCbCr 4:2:2 ITU-R BT.656 output can feed a digital image processor, frame grabber, or LCD controller. Differential inputs help reject coupled noise when the analog source is connected through a cable or converter. The primary design constraint is careful high-impedance routing from the source to the analog input pins and keeping digital clock and output traces away from the analog channel.

📺

Broadcast Video Conversion

The ADV7182ABCPZ-RL is suitable for broadcast and professional video equipment that must normalize an analog baseband input before downstream processing. Automatic detection of NTSC, PAL, and SECAM allows one decoder design to support international source material, and the 10-bit conversion stage provides greater amplitude granularity than an 8-bit decoder. The component outputs 4:2:2 component data through the serial ITU-R BT.656 interface. External horizontal sync, vertical sync, and field timing can be supplied to compatible video ASICs or LCD controllers. For production equipment, verify the exact temperature grade, qualification requirements, and source timing architecture before releasing the design.

🎥

Surveillance Camera Systems

The ADV7182ABCPZ-RL can serve as the analog-video decoding stage in surveillance installations that use legacy composite camera signals but require digital recording or image processing. Its support for NTSC, PAL, and SECAM addresses regional camera standards, while the 10-bit ADC provides additional amplitude resolution for image capture. The differential input architecture is valuable when the camera connection experiences ground-offset or interference concerns. Use the ITU-R BT.656 output to feed a digital processor, and confirm the timing relationship between the decoder data and external synchronization signals. Connector grounding, isolation, and input filtering remain essential for reliable surveillance-system performance.

💊

Medical Imaging Video Sources

The ADV7182ABCPZ-RL is applicable to medical imaging equipment that accepts standard-definition analog video from an imaging source while performing subsequent processing in digital hardware. The decoder's automatic NTSC, PAL, and SECAM recognition reduces format-management complexity, and its 10-bit conversion can preserve finer luminance and chroma amplitude information than an 8-bit conversion stage. The 4:2:2 ITU-R BT.656 stream can connect to an FPGA, image processor, or display controller. Medical-system qualification must be assessed independently, and the input stage should prioritize isolation, grounding, and stable reference design to prevent video artifacts from affecting diagnostic displays.

🖥️

Legacy Video Capture Cards

The ADV7182ABCPZ-RL is appropriate for legacy video capture cards that need to convert analog composite or component sources into a digital stream for storage, compression, or display. Automatic standard detection supports NTSC, PAL, and SECAM without separate decoder boards, while differential inputs improve noise immunity in PC and industrial enclosure environments. The resulting ITU-R BT.656 YCbCr 4:2:2 data can be captured by a digital video ASIC or FPGA. Designers should account for the 32-LFCSP footprint, analog input routing, required bypassing, and register setup. Because the family is not recommended for new designs, long-lived capture products should confirm lifecycle support and consider a planned transition.

🔧

Video Test and Measurement

The ADV7182ABCPZ-RL can be used in video test equipment that accepts several international analog standards and checks their conversion into digital component data. The 10-bit ADC provides a more detailed amplitude representation than an 8-bit decoder, while automatic NTSC, PAL, and SECAM detection simplifies instrument setup. Its 4:2:2 ITU-R BT.656 output allows the decoded result to be compared with expected digital video patterns or routed into a display controller. For measurement accuracy, synchronize the decoder to the incoming source, maintain a clean analog reference, and use external HS, VS, and FIELD timing where required. This is a practical choice for retrofitting analog video coverage into a digital instrument platform.

What is the ADV7182ABCPZ-RL?
The ADV7182ABCPZ-RL is a 10-bit SDTV video decoder with differential inputs from Analog Devices. It automatically detects NTSC, PAL, and SECAM analog baseband video and converts it into YCbCr 4:2:2 component-video data through a serial ITU-R BT.656 interface. According to the Analog Devices ADV7182 product documentation, the device also supports I2C configuration and external HS, VS, and FIELD timing references.
What video standards does the ADV7182ABCPZ-RL support?
The ADV7182ABCPZ-RL supports worldwide NTSC, PAL, and SECAM analog baseband video signals. Analog Devices states that the decoder automatically detects the incoming format, reducing the need for separate decoders or manual format selection. Its output is converted into a YCbCr 4:2:2 component-video data stream suitable for digital video processors and LCD controllers.
Where can I download the ADV7182ABCPZ-RL datasheet PDF?
The official ADV7182 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/adv7182.html. The linked documentation identifies the data sheet as Rev. C and links the product data sheet and related resources. Use the manufacturer data sheet for the authoritative pin description, register map, electrical limits, and LFCSP land-pattern guidance.
Where can I find the ADV7182ABCPZ-RL pinout?
The ADV7182ABCPZ-RL pinout is documented in the pin-description table and package drawing in the Analog Devices ADV7182 manufacturer data sheet. The component uses a 32-LFCSP package measuring 5 x 5 mm. Assign PCB tracks directly from that table rather than inferring connections from another package, because analog inputs, digital outputs, power, ground, and exposed-pad requirements must follow the exact datasheet.
What is the difference between the ADV7182 and ADV7182A?
The ADV7182A has the same pinout and is software compatible with the ADV7182. Analog Devices describes the ADV7182A as a multiformat video decoder that automatically detects standard analog baseband signals and converts them into YCbCr 4:2:2 component-video streams. The target ADV7182ABCPZ-RL belongs to this 10-bit ADV7182A decoder family.
ADV7182ABCPZ-RL vs ADV7182A - which should be selected?
The ADV7182A is the better selection when software compatibility with the ADV7182 and the same pinout are explicit design requirements, because Analog Devices states both properties directly. For an existing ADV7182A-based board, the ADV7182ABCPZ-RL is the orderable family variant identified in the product documentation. Final qualification should compare the exact ordering suffix, temperature range, and production status.
When should I choose the ADV7182ABCPZ-RL over a dedicated digital video decoder?
Choose the ADV7182ABCPZ-RL when the source is analog NTSC, PAL, or SECAM video and the downstream device accepts ITU-R BT.656 YCbCr 4:2:2 data. A dedicated digital video decoder is more appropriate when the source already contains digital component or encoded video and no analog-to-digital conversion is required. The ADV7182ABCPZ-RL is therefore most useful as an analog-video interface stage.
Is the ADV7182ABCPZ-RL suitable for industrial and broadcast equipment?
The ADV7182ABCPZ-RL is suitable for equipment that must accept multiple analog television standards and convert them into a digital interface, including industrial video, surveillance, broadcast, and legacy capture systems. Its automatic NTSC, PAL, and SECAM detection and differential analog input are central advantages. Industrial temperature qualification and specific broadcast compliance must still be checked against the exact ordering variant.
What can replace the ADV7182ABCPZ-RL?
The ADV7182A family is the closest replacement family because Analog Devices states that it has the same pinout and is software compatible with the ADV7182. A valid drop-in replacement must match the 32-LFCSP footprint, pin functions, supply requirements, register behavior, and electrical performance. Submit the exact part number through the Request a Quote form on this page when an alternative sourcing review is required.
Is the ADV7182A the same as the ADV7182ABCPZ-RL?
The ADV7182A is the decoder family designation, while ADV7182ABCPZ-RL is a specific orderable part within that family. The family has the same pinout and software compatibility as the ADV7182. Exact interchangeability still depends on the package suffix, temperature grade, production status, and register requirements of the finished equipment.
What is the best cross-brand equivalent for the ADV7182ABCPZ-RL?
No cross-brand drop-in equivalent is established by the available cross-reference results. A valid cross-brand replacement would need the same 32-LFCSP footprint, pin-to-pin connectivity, differential analog input architecture, ITU-R BT.656 output, and compatible I2C control. Use the Request a Quote form on this page to request a quotation and engineering review of any proposed substitute.
Where to buy the ADV7182ABCPZ-RL online?
Use the Request a Quote form on this page to request the ADV7182ABCPZ-RL and confirm current availability, minimum order quantity, and delivery timing. The manufacturer identifies the component as not recommended for new designs, so lifecycle planning should include confirmation of supported sourcing and an alternative for long-term production needs.
What is the price of the ADV7182ABCPZ-RL?
Current commercial terms for the ADV7182ABCPZ-RL are shown through the Request a Quote form on this page. The form is the appropriate route because the manufacturer lists the device as not recommended for new designs and market availability can change independently of the technical documentation. Submit the quantity and required packaging information with the request.
What is the lead time and stock status for the ADV7182ABCPZ-RL?
Current stock, minimum order quantity, and lead time for the ADV7182ABCPZ-RL should be confirmed through the Request a Quote form on this page. Because Analog Devices marks the family as not recommended for new designs, avoid assuming long-term availability for production programs. Submit planned annual usage and schedule requirements so the sourcing response can reflect the actual lifecycle position.
What are the key specifications of the ADV7182ABCPZ-RL that engineers should know?
The ADV7182ABCPZ-RL combines a 10-bit ADC, differential analog inputs, automatic NTSC/PAL/SECAM detection, and YCbCr 4:2:2 output in a 32-LFCSP 5 x 5 mm package. Its serial output uses ITU-R BT.656 and configuration is handled through I2C. Analog Devices also states that the ADV7182A has the same pinout and is software compatible with the ADV7182.

بيانات مرجعية هندسية لـ ADV7182ABCPZ-RL — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADV7182ABCPZ-RL when an existing or legacy system requires an analog NTSC, PAL, or SECAM input to be converted into digital YCbCr 4:2:2 data through an ITU-R BT.656 interface. Its differential input, 10-bit ADC, automatic format detection, and I2C configuration make it appropriate for industrial vision, broadcast conversion, surveillance, medical imaging, and test equipment. The ADV7182A family is the relevant migration path because Analog Devices states that it retains the ADV7182 pinout and software compatibility. Before approving the replacement, confirm the exact ordering suffix, supply requirements, temperature grade, and lifecycle availability. Do not select a cross-brand device unless its complete 32-LFCSP pin map, register behavior, electrical limits, and signal timing have been independently verified.

المقارنة مع البدائل

المعامل هذا المنتج ADV7182A
Package 32-LFCSP (5x5) 32-LFCSP (5x5)
Brand Analog Devices Analog Devices
Product Type 10-bit SDTV video decoder with differential inputs 10-bit SDTV video decoder with differential inputs
Supported Video Standards NTSC, PAL, and SECAM NTSC, PAL, and SECAM
Output Format YCbCr 4:2:2 component video YCbCr 4:2:2 component video
Digital Video Interface Serial ITU-R BT.656 Serial ITU-R BT.656
Control Interface I2C I2C
ADC Resolution 10 bit 10 bit
Pin Compatibility Reference design Same pinout and software compatible with ADV7182
Lifecycle Status Not recommended for new designs Not recommended for new designs

أبرز الفروقات

  • Direct compatibility with ADV7182 systems (مقابلADV7182A)
  • Multi-standard analog video conversion (مقابلADV7182A)
  • Higher conversion resolution (مقابلADV7182A)

ملاحظات التصميم

Route the differential analog input as a short, impedance-controlled pair and keep it physically separated from the ITU-R BT.656 outputs and I2C traces. Analog Devices specifies differential inputs, so the source impedance, connector grounding, and input filtering directly affect signal integrity. Place the required bypass and input-network components close to their associated pins, and follow the manufacturer reference layout rather than adapting a generic LFCSP footprint.

Use the external HS, VS, and FIELD timing inputs when the downstream LCD controller or video ASIC requires an independent timing reference. Keep these timing nets away from the differential analog pair, especially when the video source is connected by cable. Proper source termination, grounding, and register configuration are necessary to keep the ITU-R BT.656 output synchronized with the incoming composite or component video.

Do not treat the 10-bit ADC resolution as permission to omit analog signal conditioning or grounding. The decoder must still receive a valid analog baseband signal within its electrical limits, and differential input routing must preserve signal balance. Also verify power sequencing, required bypassing, clock configuration, and register initialization from the manufacturer data sheet. Because the family is not recommended for new designs, lifecycle planning should be completed before committing to a long production run.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The Analog Devices product pages identify the ADV7182 and ADV7182A families as not recommended for new designs. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available manufacturer excerpts.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADV7182ABCPZ-RL datasheet ADV7182ABCPZ-RL pinout ADV7182ABCPZ-RL datasheet pdf ADV7182ABCPZ-RL specifications ADV7182ABCPZ-RL 32-LFCSP ADV7182ABCPZ-RL equivalent ADV7182ABCPZ-RL replacement ADV7182ABCPZ-RL cross reference ADV7182ABCPZ-RL vs ADV7182A ADV7182ABCPZ-RL price ADV7182ABCPZ-RL stock Analog Devices ADV7182ABCPZ-RL ADV7182ABCPZ-RL NTSC PAL SECAM ADV7182ABCPZ-RL ITU-R BT.656 ADV7182ABCPZ-RL video decoder application

المكونات والمصطلحات ذات الصلة

Analog Devices ADV7182ABCPZ-RL ADV7182A ADV7182 10-bit video decoder SDTV video decoder interface IC video decoder digital video interface semiconductor NTSC PAL SECAM ITU-R BT.656 YCbCr 4:2:2 I2C differential input 10-bit ADC 32-LFCSP LFCSP package family surface mount industrial vision broadcast video surveillance systems medical imaging video sources
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر