ADV7400KST-80 Multiformat Video Decoder | Analog Devices
MPN: ADV7400KST-80 ✗ انتهى عمره الإنتاجيADV7400KST-80 نظرة عامة
A video decoder is an interface IC that converts encoded or compressed video data into a digital pixel representation that downstream processing equipment can understand. Within a television or video-processing system, this function sits between a video source and image-processing, display, scaler, or encoder circuitry. Multiformat decoder ICs combine several input standards and signal arrangements into one device, reducing the number of separate interface blocks required in a complex television design.
The ADV7400 family is specifically associated with advanced television applications. Analog Devices positions the ADV7402 and ADV7400 devices as complementary multiformat video decoders within broader television signal chains that can also include graphics and HDMI or DVI receivers, video encoders, and video DACs. This system-level context matters because interface selection depends on pixel format, timing, port configuration, output destination, and the surrounding video architecture.
The -80 ordering code identifies the ADV7400 variant configured for an 80 MHz operating class, subject to the detailed limits and test conditions listed in the manufacturer datasheet. The KST suffix identifies the 80-lead package used by this ordering variant. Package construction, exposed-pad requirements, soldering guidance, and maximum ratings must be followed directly from the package drawing and land-pattern information in the manufacturer datasheet.
Typical ADV7400KST-80 applications include digital television front ends, television set-top equipment, video-conversion subsystems, image-processing chains, and industrial or professional displays that receive compatible multiformat digital video. Its role is especially relevant where the product needs reliable digital video reconstruction before pixels are scaled, encoded, transmitted, or displayed.
The principal design consideration is system-level interface validation. Confirm the supported input format, expected pixel-clock range, active-pixel timing, power rails, synchronization requirements, and output destination before finalizing a board layout. Preserve the manufacturer-recommended decoupling and keep high-speed video traces short, properly referenced, and separated from noisy power-conversion stages.
This product page combines the confirmed ADV7400KST-80 identity, exact ordering code, package family, and multiformat video-decoder use with practical interface-selection guidance. It also provides same-family drop-in candidates, application relationships, and design notes intended to make television and video-interface design reviews more systematic.
بدائل مباشرة لـ ADV7400KST-80 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
ADV7400KSTZ
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ADV7400KST-100
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ADV7402KSTZ
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ADV7402KST-80
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ADV7402KST-100
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ADV7400KST-80 المواصفات
| Product Type | Multiformat video decoder IC |
| Manufacturer | Analog Devices |
| Ordering Code | ADV7400KST-80 |
| Speed Grade Code | -80 |
| Package Designation | 80-lead KST surface-mount package |
| نوع التركيب | Surface mount |
| Primary Application | Advanced television video decoding |
| Original Packaging Type | Bulk |
دليل تكوين أطراف ADV7400KST-80 80-lead kst surface-mount package
تكوين الأطراف لـ ADV7400KST-80 (حزمة 80-lead kst surface-mount package). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADV7400KST-80.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADV7400KST-80 مناسب لـ 6 التطبيقs: Digital Television Front End, Set-Top Television Electronics, Video Processing and Scaling, Professional Video Conversion, Industrial Display Video Interface, Video Test and Measurement Equipment.
Digital Television Front End
ADV7400KST-80 fits a digital television front end that must decode compatible multiformat video into data suitable for a scaler, display processor, or picture-quality pipeline. The -80 ordering class and 80-lead KST package provide a defined configuration for designs operating within the ADV7400 family's timing and electrical limits. Place the decoder close to the incoming video source, provide the manufacturer's recommended decoupling, and route clocks, data, and synchronization through a continuous reference plane. Validate active-pixel timing and supported source formats against the manufacturer datasheet before schematic and layout release.
موصى به
Set-Top Television Electronics
The ADV7400KST-80 is applicable within set-top television electronics where a multiformat video stream must be reconstructed before scaling or image processing. Its -80 speed-grade configuration is appropriate when the complete interface remains within the family's defined operating range. The 80-lead KST package supports dense mixed-signal television boards, although careful decoupling and return-path planning remain essential. Confirm supported chroma format, pixel clock, synchronization behavior, and output interface against the source system rather than assuming compatibility solely from the product family.
موصى به
Video Processing and Scaling
ADV7400KST-80 can serve as the decoding stage ahead of a dedicated scaling or image-processing device in professional display equipment. The decoder establishes the pixel data consumed by subsequent processing, so interface timing must be characterized across every supported input format. Maintain short matched-length routes where channel skew matters, isolate the video domain from noisy converter paths, and provide stable clocking under the maximum intended pixel rate. The manufacturer's family documentation should determine the exact digital input format and output mapping before this device is assigned to a processing chain.
موصى به
Professional Video Conversion
For professional video-conversion equipment, ADV7400KST-80 provides a dedicated multiformat decoding function ahead of conversion and reconstruction stages. This is useful when the product must ingest several television-compatible video arrangements without implementing decoding in external logic. The design must verify whether the required standards, pixel formats, and clock rates are supported by the exact ADV7400 ordering configuration. Treat the KST package's supply pins and exposed thermal area according to the manufacturer land pattern, and check decoupled supply routing to prevent video timing degradation during high-bandwidth operation.
موصى به
Industrial Display Video Interface
ADV7400KST-80 is suitable for industrial display systems that accept television-derived digital video and require deterministic decoding before display control. The -80 configuration supports structured product partitioning when all timing and feature requirements remain within the ADV7400 family's stated operating conditions. In an industrial enclosure, pay particular attention to temperature limits, supply tolerance, and long-term thermal performance. Use solid grounding, local bypass capacitors, and controlled routing between the decoder and downstream display interface, while avoiding long stubs that can degrade clock or data-edge quality.
موصى به
Video Test and Measurement Equipment
ADV7400KST-80 can be used in video test equipment that needs a standardized decoding stage before measurement, conversion, or loopback functions. A fixed decoder configuration helps separate source-format handling from the measurement path. The integration team must characterize supported timing, allowable pixel-clock range, and synchronization behavior for every test signal intended to be supported. Keep measurement clocks and sensitive circuitry away from high-speed video return currents, and validate the complete power tree under worst-case video activity so timing measurements are not influenced by supply movement.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADV7400KST-80 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADV7400KSTZ | ADV7400KST-100 | ADV7402KSTZ | ADV7402KST-80 | ADV7402KST-100 |
|---|---|---|---|---|---|---|
| Package | 80-lead KST | 80-lead KST | 80-lead KST | 80-lead KST | 80-lead KST | 80-lead KST |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Decoder Family | ADV7400 | ADV7400 | ADV7400 | ADV7402 | ADV7402 | ADV7402 |
| Primary Application | Advanced television video decoding | Advanced television video decoding | Advanced television video decoding | Multiformat television video decoding | Multiformat television video decoding | Multiformat television video decoding |
أبرز الفروقات
- Exact -80 speed-grade ordering configuration (مقابلADV7400KST-100)
- ADV7400-specific decoder configuration (مقابلADV7402KST-80)
- Shared KST footprint for controlled board reuse (مقابلADV7400KSTZ)
ملاحظات التصميم
Route clocks, pixel data, and synchronization on a continuous reference plane with minimal layer transitions and no unnecessary stubs. Keep the ADV7400KST-80 close to the source and destination devices so high-speed edges retain margin. Use the manufacturer package drawing and recommended land pattern, and avoid routing video signals beneath switching-regulator inductors or their high-current paths.
Implement the power architecture and decoupling recommended in the ADV7402 and ADV7400 family documentation. Place required bypass capacitors close to the associated KST package pins, keep supply and ground paths compact, and provide a quiet return path beneath the device where the layout guidance permits. Verify startup sequencing and supply tolerances across every intended video mode before releasing the PCB.
Characterize pixel-clock and data routing with the highest-rate video mode that the product will support. Maintain consistent spacing between adjacent high-speed nets, avoid long parallel runs next to noisy switching nodes, and use source-terminated or length-matched routing when required by the interface timing. Confirm setup and hold behavior against the manufacturer timing table rather than relying on nominal clock frequency alone.
Do not assume that parts sharing the KST package are automatically interchangeable. ADV7400 and ADV7402 configurations can differ in supported video features, operating class, temperature grade, and interface requirements even when their package drawings match. Before substitution, compare the exact pin table, supply limits, clock limits, formats, control registers, and power sequencing requirements.
معلومات الامتثال
Compliance attributes could not be confirmed from the listed technical and distributor results. The -80 ordering code should not be interpreted as an AEC-Q100 qualification designation without an explicit manufacturer statement.