ATF22LV10CZ-25SC - 500-Gate 25ns SPLD | Microchip Technology
MPN: ATF22LV10CZ-25SC ✓ نشطATF22LV10CZ-25SC نظرة عامة
A simple programmable logic device, or SPLD, is a semiconductor that implements a fixed collection of AND-array, OR-array, and programmable I/O resources. In the system hierarchy, an SPLD belongs to programmable logic devices, which sit between fixed logic gates and larger programmable logic arrays. The ATF22LV10C architecture is suited to compact designs requiring modest logic density, flexible I/O assignments, and electrical reconfiguration without changing the PCB.
The ATF22LV10CZ-25SC provides 10 macrocells and approximately 500 gates of programmable logic. Its 25 ns speed grade supports moderate clock rates and control paths, while 3.3 V to 5 V operation accommodates common industrial and embedded logic levels. The device is specified in the 24-SOIC package for surface-mount assembly, providing a small footprint for legacy and cost-sensitive control boards.
The Z designation identifies the electrically erasable implementation in the ATF22LV10C family, and the -25 suffix denotes the 25 ns speed grade. The SC package suffix identifies the commercial-temperature SOIC configuration. This combination favors designs that require deterministic combinational or registered logic but do not need the larger gate capacity of a complex PLD.
Typical uses include industrial control and instrumentation, legacy peripheral interface logic, programmable command decoding, keypad and display scanning, counter and state-machine implementation, and compact embedded system support functions. Because the device supports electrical erasure, firmware or configuration logic can be updated during manufacturing, test, or maintenance rather than requiring a new programmed device for every logic revision.
PCB design should preserve the device's documented supply and grounding arrangement and route programming, clock, feedback, and I/O signals according to the manufacturer pin description. Confirm voltage compatibility before connecting it to 5 V systems because input and output limits are device-specific. Use the manufacturer programming specification to verify supported algorithms, fuse handling, and approved third-party programmers.
This product page combines the device architecture, package characteristics, verified sourcing references, and practical selection guidance with same-family drop-in alternatives. It also highlights the differences between speed, temperature, and package variants so engineers can migrate an existing ATF22LV10 design without overlooking operating conditions or programmer requirements.
بدائل مباشرة لـ ATF22LV10CZ-25SC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ATF22LV10CZ-25SC (نفس عامل الشكل والبصمة) — يختلف في Package, Supply Voltage Range, Device Type, Number of I/O Pins, Propagation Delay.
ATF22LV10CZ-25SI
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATF22LV10CZ-25XC
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ATF22LV10C-10SU
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATF22V10C-15SC
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATF22LV10CQZ-30SU
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ATF22LV10CZ-25SC الحدود القصوى والخصائص الكهربائية
| Device Type | 22V10 Simple Programmable Logic Device |
| Programmable Logic | 500 gates |
| Macrocells | 10 macrocells |
| Speed Grade | 25 ns |
| Supply Voltage Range | 3 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V to 5 V |
| Architecture | Electrically erasable CMOS programmable logic |
| العلبة | 24-pin plastic SOIC |
| Package Body Width | 0.300 inch |
| نوع التركيب | Surface mount |
| Temperature Grade | Commercial |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | 70 °C |
| Programmable Technology | Electrically erasable |
| Logic Family | ATF22LV10C |
| نوع الخرج | Programmable I/O |
| Manufacturer | Atmel, now Microchip Technology |
دليل تكوين أطراف ATF22LV10CZ-25SC 0.300 inch
تكوين الأطراف لـ ATF22LV10CZ-25SC (حزمة 0.300 inch). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATF22LV10CZ-25SC.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATF22LV10CZ-25SC مناسب لـ 6 التطبيقs: Industrial Control Logic, Peripheral Interface Decoding, Programmable Counter and State Machine, Keypad and Display Scanning, Legacy Instrumentation Control, Embedded Access and Security Control.
Industrial Control Logic
The ATF22LV10CZ-25SC is appropriate for compact industrial control functions that fit within 10 macrocells and approximately 500 programmable gates. Its 25 ns speed grade can implement command decoding, relay sequencing, interlocks, and deterministic state transitions, while the 3 V to 5.5 V supply range supports common embedded control rails. The commercial temperature specification covers 0 °C to 70 °C, so it should be used only where the enclosure remains within that range. A 24-SOIC footprint also simplifies correction of older control boards without requiring a larger programmable-logic package.
موصى به
Peripheral Interface Decoding
The ATF22LV10CZ-25SC can translate a compact set of commands, address bits, and handshake signals into internal control outputs. With 10 macrocells and approximately 500 gates, it is well matched to interface adapters, peripheral selectors, and legacy bus-conditioning logic rather than full bus controllers. The 25 ns rating provides useful timing margin for moderate control paths, and 3.3 V or 5 V operation allows integration with established CMOS equipment. Engineers should use the manufacturer pin table to assign programmable I/O and confirm that the selected input thresholds match every connected source.
موصى به
Programmable Counter and State Machine
The ATF22LV10CZ-25SC is suitable for small counters, finite-state machines, sequencing engines, and pulse-generation circuits that do not require dedicated logic blocks. Its 10 macrocells can distribute registered or combinational logic while the 25 ns speed grade supports moderate clock rates. Electrically erasable configuration is valuable during prototyping because logic changes can be programmed without replacing the PCB. Timing review should focus on the longest feedback path, clock setup requirements, and product-specific operating limits stated in the manufacturer datasheet.
موصى به
Keypad and Display Scanning
A compact ATF22LV10CZ-25SC implementation can scan keypad rows, multiplex display segments, debounce switch inputs, and generate common strobe signals. The device's approximately 500-gate capacity and 10 macrocells make it useful for modest human-interface subsystems, particularly where an existing board already uses the 24-SOIC footprint. A 25 ns propagation speed is generally suitable for ordinary display and switch timing, although panel scan-rate requirements should be calculated before assignment. Verify voltage compatibility between the PLD, keypad matrix, and display driver to prevent logic-level mismatches.
موصى به
Legacy Instrumentation Control
The ATF22LV10CZ-25SC can serve as a compact reconfiguration layer in legacy test and measurement equipment, translating front-panel commands and status flags into instrument control signals. Its 25 ns speed grade is suitable for low- and moderate-speed sequencing, while 3 V to 5.5 V operation supports both 3.3 V and 5 V control sections. The commercial 0 °C to 70 °C rating is appropriate for indoor equipment. For laboratory systems requiring wider environmental tolerance, select an explicitly industrial-temperature alternative and verify the complete configuration and programming workflow.
موصى به
Embedded Access and Security Control
The ATF22LV10CZ-25SC can implement access-control state logic, lock sequencing, credential-event decoding, and alarm-output handling in compact embedded systems. Ten macrocells are sufficient for many sequential control paths, and the electrically erasable architecture supports configuration updates during production or maintenance. A 25 ns speed grade is appropriate for ordinary human-response and equipment-control timing rather than cryptographic processing. Security-sensitive designs should keep key material and cryptographic operations in a dedicated hardware module while using the PLD for non-secret sequencing and interface control.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATF22LV10CZ-25SC — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATF22LV10CZ-25SI | ATF22LV10CZ-25XC | ATF22LV10C-10SU | ATF22V10C-15SC | ATF22LV10CQZ-30SU |
|---|---|---|---|---|---|---|
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | 22V10 SPLD | 22V10 SPLD | 22V10 SPLD | 22V10 SPLD | 22V10 SPLD | 22V10 SPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Programmable Logic | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Speed Grade | 25 ns | 25 ns | 25 ns | 10 ns | 15 ns | 30 ns |
| Configuration Technology | Electrically erasable | Electrically erasable | Electrically erasable | Electrically erasable | Electrically erasable | Electrically erasable |
أبرز الفروقات
- Commercial-temperature option matched to indoor control systems (مقابلATF22LV10CZ-25SI)
- Faster same-family option available when timing margin matters (مقابلATF22LV10C-10SU)
- Balanced speed option within the same 22V10 class (مقابلATF22V10C-15SC)
ملاحظات التصميم
Assign the ATF22LV10CZ-25SC footprint from the 24-pin plastic SOIC outline and verify pin 1 orientation against the PCB silkscreen before layout. Keep the device close to the signals it decodes to reduce propagation delay and ringing. Follow the manufacturer datasheet for supply decoupling, ground connections, and all clock, programming, feedback, and I/O routes rather than relying on a generic PLD symbol.
The device operates across 3 V to 5.5 V, but the selected power rail must match its input thresholds and output levels. Place the required bypass capacitors at the supply and ground pins using the manufacturer layout guidance, and keep switching-converter switching nodes away from clock and feedback traces. Confirm timing margin at the actual supply voltage because 25 ns is a device speed grade rather than a complete system timing guarantee.
Do not assume that a shared 24-SOIC footprint guarantees that every 22V10-family part is interchangeable. Verify configuration technology, supported programmer, fuse or bitstream compatibility, temperature grade, speed grade, and the meaning of active-low or active-high control pins. For timing-critical designs, recalculate every path against the replacement's propagation delay rather than treating the target's 25 ns rating as a universal limit.
معلومات الامتثال
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. AEC-Q100 is not applicable because the SC variant is a commercial-temperature programmable logic device rather than an automotive-qualified product.