ATF22V10C-15PC 15ns 500-Gate EEPLD | Microchip Technology
MPN: ATF22V10C-15PC ✓ نشطATF22V10C-15PC نظرة عامة
A programmable logic device is a configurable semiconductor that implements digital functions through a programmed logic network. In the broader hierarchy, the ATF22V10C is an EEPLD, a simple PLD, and ultimately a programmable semiconductor. Compared with a fixed gate array, an EEPLD provides a practical way to consolidate several gates, registers, and product-sum terms into one device while retaining field reprogrammability.
Key features include a 15 ns speed grade, 10 macrocells, a latch feature that holds inputs at their previous logic states, and operation from a nominal 5 V supply. The manufacturer documentation describes ATF22V10C family speeds down to 5 ns, while the -15 suffix identifies the 15 ns ATF22V10C variant. The 24-pin PDIP package supports conventional through-hole assembly and is useful where a socketed or manually assembled design is preferred.
The electrically erasable Flash architecture combines a reusable configuration memory with a configurable logic array. Each macrocell can contribute product-term logic, registered output behavior, and programmable feedback according to the device architecture. The latch function is useful in designs that must preserve input or logic state during clock-related control operations. Because the device is pin-compatible with JEDEC GAL22V10 fusemaps, existing GAL22V10 designs can use the ATF22V10C family after a complete electrical, timing, and programming-tool review.
Typical uses include industrial control logic, interface decoding, state sequencing, counter and latch functions, telecommunications control, and compact glue-logic implementations. The 5 V supply and 15 ns propagation delay make the part appropriate for legacy control systems, retrofit products, and equipment requiring a 24-pin through-hole PLD footprint.
The primary design consideration is preserving the original GAL22V10-compatible pinout, fuse map, output polarity, clock behavior, and timing assumptions. Confirm programming software support, supply tolerances, temperature limits, and all AC and DC differences before substituting it into an existing production design. A socketed DIP implementation also requires attention to electrostatic handling and programming after installation.
This product summary combines the manufacturer family specifications, package details, programming characteristics, and GAL22V10 replacement guidance with practical guidance for PCB layout, timing review, and drop-in replacement assessment.
بدائل مباشرة لـ ATF22V10C-15PC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ATF22V10C-15PC (نفس عامل الشكل والبصمة) — يختلف في AEC-Q100 Qualification, Device Type, Package, RoHS Status.
ATF22V10C-10PC
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←GAL22V10D-10LP
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
GAL22V10D-10LPI
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
GAL22V10D-10LPNI
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATF22V10C-15PC الحدود القصوى والخصائص الكهربائية
| Device Type | High-performance electrically erasable programmable logic device (EEPLD) |
| Macrocell Count | 10 macrocells |
| Propagation Delay | 15 ns |
| Logic Capacity | Approximately 500 gate equivalents |
| Technology | CMOS electrically erasable Flash PLD |
| Nominal Supply Voltage | 5 V |
| Supported Family Speed | Down to 5 ns |
| العلبة | 24-pin PDIP |
| Package Width | 0.300 in (7.62 mm) |
| نوع التركيب | Through-hole |
| Latch Feature | Holds inputs to previous logic states |
| Programmable Logic Type | EEPLD |
| Compatible Architecture | GAL22V10 pin-to-pin and JEDEC fusemap compatible |
| حالة RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
دليل تكوين أطراف ATF22V10C-15PC 0.300 in (7.62 mm)
تكوين الأطراف لـ ATF22V10C-15PC (حزمة 0.300 in (7.62 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATF22V10C-15PC.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATF22V10C-15PC مناسب لـ 6 التطبيقs: Industrial Control Logic, Interface Address Decoding, Telecommunications Control, Counter and Sequence Generator, Legacy Equipment Retrofit, Test and Measurement Control.
Industrial Control Logic
The ATF22V10C-15PC fits compact 5 V control boards that require programmable state sequencing, interlocks, mode decoding, or discrete logic consolidation. Its 10 macrocells provide enough logic density for small control blocks without introducing a modern FPGA or microcontroller, while electrically erasable Flash configuration supports revision changes without replacing the device. The 15 ns propagation delay is appropriate for moderate-speed control paths. For industrial deployment, confirm the exact temperature grade, supply tolerances, and industrial-control timing assumptions in the manufacturer datasheet before releasing the design.
موصى به
Interface Address Decoding
ATF22V10C-15PC can implement decode, chip-select, interrupt-routing, and bus-interface logic where a small number of Boolean equations and registered outputs are required. Its 10 macrocells allow related address and control functions to be consolidated in one 24-pin device, and the GAL22V10-compatible architecture simplifies migration from older fuse-mapped designs. A 15 ns delay should be included in the address-access and data-capture budget. Validate output polarity, clock relationships, and setup or hold requirements against the original system timing.
موصى به
Telecommunications Control
The ATF22V10C-15PC is suitable for compact telecommunications support logic that performs alarm decoding, framing control, status latching, or backplane command sequencing. Its electrically erasable Flash configuration permits multiple product revisions, and the nominal 5 V operation supports integration with legacy 5 V control logic. The 24-pin PDIP package also suits repairable telecommunications boards designed around socketed devices. The designer must verify voltage levels, noise margins, temperature limits, and timing against the line-card requirements rather than assuming generic GAL22V10 electrical characteristics.
موصى به
Counter and Sequence Generator
ATF22V10C-15PC can implement counters, state machines, one-shots, and custom sequence generators in equipment that needs programmable behavior without a larger processor. Multiple macrocells can be assigned to state equations and registered outputs, while the latch feature provides controlled state-holding behavior. The 15 ns propagation-delay grade supports moderate clock and control rates, but the actual maximum operating frequency must be derived from the relevant setup, hold, clock, and propagation paths. Preserve the JEDEC GAL22V10 fuse-map convention when loading a programmed configuration.
موصى به
Legacy Equipment Retrofit
The ATF22V10C-15PC is useful for maintaining or replicating older GAL22V10-based equipment because the ATF22V10C family is documented as pin-to-pin and JEDEC fusemap compatible with GAL22V10. A technician or engineer can retain a 24-pin through-hole board and existing logic architecture while moving from one-time-programmable fuse devices to electrically erasable Flash configuration. This migration still requires checking output drive, supply current, AC timing, temperature, and programmer behavior because Microchip notes minor AC and DC differences between the device families.
موصى به
Test and Measurement Control
ATF22V10C-15PC can implement front-panel sequencing, relay-control decoding, status indication, and measurement-path switching in older 5 V test equipment. Its programmable equations allow a single device to coordinate several related control signals, while electrically erasable Flash simplifies product-variant programming. The 24-pin PDIP format is particularly convenient for prototypes and serviceable instruments. Verify every timing path against the required measurement sequence and confirm the device's supply and temperature ratings for the instrument enclosure before incorporating it into new test architecture.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATF22V10C-15PC — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATF22V10C-10PC | GAL22V10D-10LP | GAL22V10D-10LPI | GAL22V10D-10LPNI |
|---|---|---|---|---|---|
| Package | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Propagation Delay | 15 ns | 10 ns | 10 ns | 10 ns | 10 ns |
| JEDEC Fusemap Compatibility | GAL22V10 compatible | GAL22V10 compatible | Native GAL22V10 architecture | Native GAL22V10 architecture | Native GAL22V10 architecture |
أبرز الفروقات
- Exact 15 ns speed grade with electrically erasable Flash configuration (مقابلATF22V10C-10PC)
- Direct continuity for 15 ns GAL22V10-based equipment (مقابلGAL22V10D-10LP)
- Field-reprogrammable implementation in a serviceable 24-pin DIP package (مقابلGAL22V10D-10LPI)
ملاحظات التصميم
Do not assume that the -10 suffix identifies only a packaging change. ATF22V10C-10PC has a 10 ns propagation-delay grade compared with 15 ns for ATF22V10C-15PC, while ATF22V10C-15JI is a different ordering variant and may use another package or temperature designation. Enter the complete ordering code in the programmer and cross-check the physical 24-pin PDIP footprint, fuse map, temperature grade, and supply requirements before approving a substitution.
Preserve the GAL22V10-compatible DIP footprint and avoid changing signal assignments merely because the alternative is described as pin-compatible. Check every input, output, clock, feedback, control, supply, and ground connection in the manufacturer datasheet and the existing schematic. For socketed boards, verify that the substitute's lead dimensions and insertion orientation match the original 24-pin PDIP package. A successful electrical substitution still requires correct physical orientation and adequate clearance around adjacent components.
Recalculate the worst-case timing path after substituting a device with different AC characteristics. The 15 ns target part and the listed 10 ns alternatives are close for many legacy applications, but a faster propagation delay does not guarantee identical clock, setup, hold, output-disable, or power behavior. Compare the complete AC and DC tables, preserve registered-output polarity, and test the programmed configuration at the intended supply voltage and temperature before production release.
Treat the fuse map as part of the device specification, not merely the Boolean equations. ATF22V10C devices are documented as GAL22V10 pin-to-pin and JEDEC fusemap compatible, but Microchip also notes minor AC and DC differences between the device families. Retain the original programmed file, verify architecture bits, reserved fields, product terms, feedback assignments, and output polarity in the programming tool, and perform a power-up and functional test on representative hardware.
معلومات الامتثال
The ATF22V10C-15PC is a 5 V CMOS programmable logic device for industrial and commercial electronics rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified for this ordering code and remain unknown.