Microchip Technology

ATSAMD20J16A-AU - 48MHz Cortex-M0+ 64KB MCU | Microchip

MPN: ATSAMD20J16A-AU ✓ نشط
1.62 V to 3.6 V Vdss 64-TQFP (10 x 10 mm) Package 48 MHz Speed 64 KB (64K x 8) Memory
الحد الأدنى للطلب: 1 |

ATSAMD20J16A-AU نظرة عامة

The Microchip Technology ATSAMD20J16A-AU is a 32-bit ARM Cortex-M0+ flash microcontroller with a 48 MHz maximum clock, 64 KB of program flash, and 8 KB of SRAM, housed in a 64-pin TQFP surface-mount package. It belongs to the SAM D20J series and combines a compact general-purpose microcontroller core with mixed-signal peripherals for embedded control designs.

A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one programmable component. The ATSAMD20J16A-AU sits within the hierarchy of embedded processor, 32-bit microcontroller, ARM Cortex-M microcontroller, and power-management-aware embedded controller. Its role is to execute application firmware, acquire sensor data, control outputs, and coordinate communication across home automation, consumer, metering, and industrial systems.

Three headline features define this device: a 48 MHz Cortex-M0+ operating frequency, 64 KB of flash memory, and 8 KB of SRAM. The flash provides executable code and nonvolatile data storage, while SRAM supports stack, variables, buffers, and real-time processing. The family also includes 10-bit and 12-bit conversion features, as identified in the ATSAMD20J16A-AU product listing, for systems requiring analog measurement or control.

The SAM D20 architecture is intended for low-power embedded applications and operates from a 1.62 V to 3.6 V supply range. This voltage range permits use with common low-voltage digital rails, although the complete application must maintain the required sequencing and decoupling characteristics for the selected operating mode. The 64-pin TQFP package provides a substantial pin count for external interfaces while remaining compatible with conventional surface-mount assembly and inspection.

Typical applications include smart-home controllers, utility metering equipment, industrial sensing modules, consumer controls, and compact embedded gateways. These uses benefit from the combination of 64 KB flash, 8 KB SRAM, and a 48 MHz processor, which provides enough memory for protocol handling and control logic without requiring a higher-cost memory configuration. Firmware should also use the available peripheral resources to minimize external components.

When laying out the PCB, place decoupling capacitors at the supply pins and route high-current and sensitive analog signals away from switching nodes. Confirm the exact pin names, peripheral multiplexing options, and package dimensions against the manufacturer pinout documentation before assigning PCB nets. The 64-pin footprint is not sufficient proof of functional equivalence; firmware, power requirements, and peripheral mappings must also be reviewed.

This product record combines the verified manufacturer identity, core and memory specifications, package information, sourcing references, and application-focused engineering guidance. It also distinguishes same-family alternatives by memory capacity and peripheral changes, helping designers identify a drop-in candidate without overlooking firmware or hardware compatibility requirements.

بدائل مباشرة لـ ATSAMD20J16A-AU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATSAMD20J16A-AU (نفس عامل الشكل والبصمة) — يختلف في Package, ADC, DAC, Mounting Type, SRAM.

Microchip Technology
Package: 32-pin TQFP
SRAM: 4 KB
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: TQFP-64 (10x10 mm)
ADC: 12-bit SAR, up to 20 channels
DAC: 10-bit, 350 ksps
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
ADC: 12-bit, 12 channels, 350 ksps
DAC: 10-bit, 1 channel, 350 ksps
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10x1 mm)
ADC: 12-bit, up to 350 ksps, up to 20 channels
DAC: 10-bit, 350 ksps, 1 channel
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-pin TQFP (industrial grade)
ADC: 12-bit, 256-channel PTC support
DAC: 10-bit
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
ADC: 12-bit, up to 350 ksps
DAC: 10-bit, 350 ksps
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-LQFP (10x10 mm)
ADC: 12-bit, up to 200 ksps
DAC: 10-bit
قارن مع ATSAMD20J16A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
ADC: 12-bit, 8-channel, up to 350 ksps
DAC: 10-bit, 1-channel
قارن مع ATSAMD20J16A-AU →

ATSAMD20J18A-AU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 64-TQFP (10x10)
ARM Cortex-M0+ (ARMv6-M, 32-bit) · 48 MHz · 256 KB · 32 KB · 1.62 V to 3.6 V · 64-LQFP (10x10 mm) · Up to 52 · 12-bit, up to 200 ksps

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATSAMD20J17A-AN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 64-TQFP (10x10)
ARM Cortex-M0+ (32-bit) · 48 MHz · 128 KB · 16 KB · 1.62 V to 3.63 V · -40 C to +105 C (industrial) · 64-pin TQFP (industrial grade) · 12-bit, 256-channel PTC support

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATSAMD20J14A-AN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 64-TQFP (10x10)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB · 2 KB · 1.6 V to 3.6 V · TQFP-64 (10x10 mm) · 64

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATSAMD20E15A-AN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 64-TQFP (10x10)
ARM Cortex-M0+ (32-bit) · 48 MHz · 32 KB · 4 KB · 1.62 V to 3.63 V · -40 C to +105 C · 2.14 CoreMark/MHz · 12-bit

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATSAMD21J16A-CU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-TQFP (10x10)
Core speed, 64 KB flash, and 8 KB SRAM remain equivalent, while SAM D21 peripheral mappings differ from SAM D20J

📋 بديل مرجعي (غير موجود في الكتالوج)

ATSAMD20J16A-AU الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M0+ flash microcontroller
Series SAM D20J
Processor Core ARM Cortex-M0+
أقصى تردد للساعة 48 MHz
Program Flash Memory 64 KB (64K x 8)
SRAM 8 KB
عرض ناقل البيانات 32 bit
Supply Voltage Range 1.62 V to 3.6 V
ADC Resolution 10 bit and 12 bit
العلبة 64-TQFP (10 x 10 mm)
عدد الأطراف 64 pins
نوع التركيب Surface mount
CoreMark Performance 2.14 CoreMark/MHz

دليل تكوين أطراف ATSAMD20J16A-AU 64-tqfp (10 x 10 mm)

تكوين الأطراف لـ ATSAMD20J16A-AU (حزمة 64-tqfp (10 x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 64-tqfp (10 x 10 mm) لـ ATSAMD20J16A-AU

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATSAMD20J16A-AU.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATSAMD20J16A-AU مناسب لـ 6 التطبيقs: Smart Home Controller, Utility Metering Equipment, Industrial Sensor Node, Consumer Appliance Control, Battery-Powered Sensing Device, Data Acquisition Front End.

🧩

Smart Home Controller

The ATSAMD20J16A-AU fits compact smart-home controllers that coordinate sensors, actuators, status indicators, and local user interfaces. Its 48 MHz Cortex-M0+ core provides sufficient control throughput, while 64 KB flash accommodates protocol handlers and application logic and 8 KB SRAM supports buffers and working variables. The 1.62 V to 3.6 V operating range is appropriate for low-voltage embedded designs. Designers should reserve pins for the intended communications interface, assign analog inputs through the verified pin table, and validate that the selected wireless companion module does not create supply-noise or timing problems.

⚡

Utility Metering Equipment

The ATSAMD20J16A-AU is suitable for metering equipment that measures analog quantities, applies calibration, formats records, and communicates through a low-speed serial interface. The listed 10-bit and 12-bit conversion capabilities provide conversion options for sensor conditioning, and the 48 MHz processor can supervise acquisition, filtering, and event handling. Its 8 KB SRAM allows moderate packet buffering, while 64 KB flash holds firmware and calibration data. Accuracy depends on the external reference, analog front end, and PCB layout; use the manufacturer pin assignments to isolate sensitive analog channels and place supply and reference components close to the MCU.

🏭

Industrial Sensor Node

The ATSAMD20J16A-AU can serve as the local controller in an industrial sensor node that samples analog inputs, evaluates thresholds, controls a relay or actuator, and reports status. A 48 MHz Cortex-M0+ core offers useful real-time response without requiring a larger processor, and 8 KB SRAM is sufficient for compact sampled-data buffers. The low-voltage supply range supports integration into 3.3 V industrial electronics. Keep switching-regulator nodes and high-current actuator traces away from analog inputs, provide local supply bypassing, and validate input limits because industrial transient protection must be implemented outside the MCU.

🔧

Consumer Appliance Control

The ATSAMD20J16A-AU is appropriate for consumer appliance controls that manage buttons, displays, relays, and embedded communication. Its 64 KB flash provides space for a control application, while 8 KB SRAM supports state variables and short communication frames. The 48 MHz Cortex-M0+ core can execute responsive foreground and background routines without an external processor. Appliance implementations must account for motor or relay noise, use safe actuator states during startup, and include brownout and fault handling. Confirm the exact peripheral pins and alternate functions in the manufacturer documentation before freezing the board layout.

📱

Battery-Powered Sensing Device

The ATSAMD20J16A-AU can serve as the supervisory controller in a battery-powered sensing device that wakes periodically, measures its environment, stores results, and transmits through a low-duty-cycle communications link. The 48 MHz Cortex-M0+ processor provides ample computational headroom, while the 8 KB SRAM reduces the need for external memory in simple designs. Low-power operation still depends on firmware, clock configuration, unused peripherals, and the external radio, so the complete sleep-current budget must be measured rather than inferred from processor frequency alone. Select the radio and regulator to minimize leakage and rail disturbances.

📊

Data Acquisition Front End

The ATSAMD20J16A-AU is usable as the control and processing element of a compact data-acquisition front end that digitizes sensor inputs, applies filtering, timestamps events, and forwards results. Its 10-bit and 12-bit conversion options match the stated family capability, and the 48 MHz core can supervise multiple acquisition channels. The 64 KB flash limits total embedded code and stored calibration data, while 8 KB SRAM supports working buffers but not large offline datasets. Use separate analog and digital ground planning, short reference routes, controlled-layout analog inputs, and suitable filtering; verify converter input limits against the selected operating configuration.

ملخص المنتجات الموصى بها

ATSAMD20J18A Same-family controller with additional flash memory يُستخدم في: Smart Home Controller, Utility Metering Equipment, Industrial Sensor Node, Consumer Appliance Control, Data Acquisition Front End ATSAMD21J16A-CU Cortex-M0+ controller alternative with a newer peripheral family يُستخدم في: Smart Home Controller, Consumer Appliance Control, Data Acquisition Front End ATSAMD20J17A Same-family controller with additional program storage يُستخدم في: Utility Metering Equipment, Battery-Powered Sensing Device ATSAMD20J14A Lower-flash same-family controller for simpler firmware يُستخدم في: Industrial Sensor Node, Battery-Powered Sensing Device
What are the key specifications of ATSAMD20J16A-AU?
The ATSAMD20J16A-AU is a 32-bit ARM Cortex-M0+ microcontroller operating up to 48 MHz with 64 KB of flash and 8 KB of SRAM in a 64-pin TQFP package. According to the Microchip ATSAMD20J16 product page, the device is designed for home automation, consumer, metering, and industrial applications. Its 1.62 V to 3.6 V supply range supports low-voltage embedded systems, while the listed 10-bit and 12-bit conversion features support analog measurement functions.
Where can I download the ATSAMD20J16A-AU datasheet?
The ATSAMD20J16A-AU datasheet should be obtained from the Microchip ATSAMD20J16 product page, which provides the authoritative family documentation for this device. The verified product page is https://www.microchip.com/en-us/product/ATSAMD20J16. Before finalizing the schematic, consult the manufacturer pin-description and package drawings to confirm the 64-pin assignments, power pins, analog functions, and alternate peripheral mappings used by the design.
What is the ATSAMD20J16A-AU pinout?
The ATSAMD20J16A-AU uses a 64-pin TQFP package with a 10 mm by 10 mm body, but the complete numbered pin list is not included on the product-page summary. Use the pin-description table in the Microchip ATSAMD20J16 manufacturer documentation when assigning PCB nets. This procedure is essential because the 64-pin SAM D20J package can multiplex several peripheral functions onto individual pins, and the valid function depends on configuration and operating mode.
What is the operating voltage of ATSAMD20J16A-AU?
The ATSAMD20J16A-AU supports a 1.62 V to 3.6 V supply voltage range. This operating range permits use in conventional low-voltage embedded equipment, but the design must observe the voltage, decoupling, and startup requirements stated in the manufacturer documentation. Confirm that every attached peripheral and I/O signal remains within its corresponding electrical limits when the MCU operates near either end of the range.
How much memory does ATSAMD20J16A-AU have?
The ATSAMD20J16A-AU provides 64 KB of flash memory and 8 KB of SRAM. Flash stores executable firmware and nonvolatile configuration data, while SRAM is used for stack storage, variables, communication buffers, and runtime working data. According to the Microchip product-page summary, the device combines this memory configuration with a maximum operating frequency of 48 MHz.
Is ATSAMD20J16A-AU suitable for home automation and metering?
The ATSAMD20J16A-AU is suitable for home automation and metering applications that fit within its 64 KB flash, 8 KB SRAM, and 48 MHz operating envelope. The manufacturer identifies those markets alongside consumer and industrial applications. Its 10-bit and 12-bit conversion capabilities can assist with analog inputs, while its low-voltage supply range supports embedded product architectures. External sensing accuracy and metering compliance still depend on the complete signal chain and firmware.
Where can I buy ATSAMD20J16A-AU online?
Use the Request a Quote form on this page to request ATSAMD20J16A-AU availability, current commercial terms, and the required production quantity. The form is the appropriate channel for checking exact suffix, package, quantity, and lead-time requirements. Confirm that any quotation identifies ATSAMD20J16A-AU with the 64-pin TQFP package rather than a related SAM D20 or SAM D21 variant with different memory or peripherals.
What is the price of ATSAMD20J16A-AU?
Current ATSAMD20J16A-AU commercial pricing is obtained through the Request a Quote form on this page because quotation terms can vary with quantity, package, and supply status. Use the form to request the exact one-unit and volume-break terms for the 64-pin TQFP device. Requesting ATSAMD20J16A-AU by its complete MPN prevents accidental substitution of related parts whose flash, SRAM, temperature, or peripheral options differ.
What is the lead time for ATSAMD20J16A-AU?
Request the current ATSAMD20J16A-AU lead time through the Request a Quote form on this page. Include your required order quantity, production date, and whether the standard 64-pin TQFP configuration is acceptable. Lead time can vary with inventory, projected demand, and packaging requirements, so a quantity-specific response is more useful than a generic availability statement.
Is ATSAMD20J16A-AU in stock?
ATSAMD20J16A-AU availability should be confirmed through the Request a Quote form on this page by stating the required quantity and schedule. The verified product listing identifies the device as a 64-pin TQFP Cortex-M0+ MCU, but a listing alone does not establish current inventory for every order quantity. Supply confirmation should include the complete MPN and package suffix to avoid accepting a different temperature or packaging option.
What is the best drop-in replacement for ATSAMD20J16A-AU?
The closest drop-in candidates are same-family Microchip devices that retain the 64-pin TQFP footprint, Cortex-M0+ core, 48 MHz ceiling, and low-voltage operating class. ATSAMD20J18A offers more flash, while ATSAMD21J16A-CU changes the surrounding peripheral family; neither should be treated as an unconditional substitute. Review the manufacturer pin table, memory requirement, peripheral mapping, startup behavior, and firmware dependencies before approving a replacement.
Can ATSAMD20J18A replace ATSAMD20J16A-AU?
ATSAMD20J18A can serve as a same-brand, same-footprint candidate when the PCB is compatible and the application can use its additional flash memory. The target ATSAMD20J16A-AU has 64 KB of flash, so the larger-memory variant may change firmware organization, linker assumptions, and peripheral configuration. Confirm pin-to-pin compatibility in the manufacturer documentation rather than relying on the shared 64-pin TQFP package alone.
When should I choose ATSAMD20J16A-AU over ATSAMD20J18A?
Choose ATSAMD20J16A-AU when 64 KB of flash is sufficient and minimizing unused memory capacity is a design priority. Choose ATSAMD20J18A when firmware growth, dual-bank operation, or additional embedded features justify the higher flash capacity. Both are 48 MHz Cortex-M0+ Microchip candidates in the 64-pin TQFP class, but the exact memory configuration, pin assignments, and peripheral options must be compared before selection.
ATSAMD20J16A-AU vs ATSAMD21J16A-CU: which is better for a new design?
The ATSAMD20J16A-AU is the better starting point when the design specifically targets the SAM D20J family and its verified 64 KB flash, 8 KB SRAM, and established peripheral mapping. ATSAMD21J16A-CU may be appropriate when a newer SAM D21 peripheral set is required, but it should be treated as a family migration rather than a transparent substitution. Validate pin functions, analog behavior, timer resources, communications, and firmware support before deciding.
Is ATSAMD20J16A-AU the same as ATSAMD20J16A-AUT?
ATSAMD20J16A-AUT is a packaging-related ordering variant of the ATSAMD20J16A family, while ATSAMD20J16A-AU identifies the 64-pin TQFP configuration used for the listed industrial temperature option. Both references point to the same 48 MHz Cortex-M0+ device family with 64 KB flash and 8 KB SRAM. Verify the exact package, temperature grade, and tape-and-reel ordering requirements in the manufacturer documentation.
What is the best Microchip equivalent for ATSAMD20J16A-AU?
The best same-manufacturer equivalent depends on whether memory headroom or a newer peripheral family is the priority. ATSAMD20J18A is the relevant higher-flash option within the SAM D20 family, whereas ATSAMD21J16A-CU provides a route into the SAM D21 family. Both remain 64-pin TQFP-class Cortex-M0+ devices, but exact drop-in approval requires a manufacturer pin comparison and a firmware-level peripheral review.

بيانات مرجعية هندسية لـ ATSAMD20J16A-AU — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ATSAMD20J16A-AU when the design targets the SAM D20J family, needs a 48 MHz Cortex-M0+ processor, and fits within 64 KB of flash and 8 KB of SRAM. Its 64-pin TQFP package is appropriate for embedded controls requiring a moderate number of external I/O resources. Select ATSAMD20J18A when firmware growth or additional flash features justify moving to 256 KB, and choose ATSAMD20J14A when a very small firmware image makes lower memory sufficient. ATSAMD20J17A offers a middle step at 128 KB. Consider ATSAMD21J16A-CU for new designs that deliberately need SAM D21 peripherals, but treat it as a family migration rather than an automatic replacement. For every candidate, verify the numbered pinout, supply requirements, peripheral mappings, memory layout, and existing firmware dependencies before approving a drop-in change.

المقارنة مع البدائل

المعامل هذا المنتج ATSAMD20J18A ATSAMD20J17A ATSAMD20J14A ATSAMD20E15A ATSAMD21J16A-CU
Package 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum Clock Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Program Flash Memory 64 KB 256 KB 128 KB 16 KB 16 KB 64 KB
Series SAM D20J SAM D20J SAM D20J SAM D20J SAM D20 SAM D21J

أبرز الفروقات

  • Exact 64 KB flash configuration (مقابلATSAMD20J18A)
  • Matched memory in a newer peripheral family (مقابلATSAMD21J16A-CU)
  • Lower flash demand for compact firmware (مقابلATSAMD20J14A)
  • Full 64 KB storage without the J18A increase (مقابلATSAMD20J17A)

ملاحظات التصميم

Place the required supply-bypass capacitors immediately adjacent to the corresponding VDD and VSS pins, and route them through short, low-inductance paths. A 64-pin TQFP also supports numerous ground pins; use an uninterrupted ground plane beneath the device unless the manufacturer package guidance specifies otherwise. Keep analog inputs, references, and external communication lines away from relay, motor, and switching-power-conductor paths to reduce coupled noise.

Do not treat a shared 64-pin TQFP footprint as proof that every SAM D20 or SAM D21 option is interchangeable. Compare the exact numbered pins, supply requirements, peripheral multiplexing, analog functions, clock inputs, and startup behavior. Firmware that depends on a peripheral moving to another pin can fail even when the PCB outline remains unchanged. Document the intended alternative and complete a hardware and firmware regression test before using it as a drop-in replacement.

Budget the MCU supply using the real operating mode because peripheral activity, conversion timing, and I/O loading can raise consumption above the idle condition. Provide a regulator with adequate transient response for digital and analog loads, and ensure the 1.62 V to 3.6 V supply range is never exceeded. If the board includes radio, sensor, or actuator loads, use separate filtering paths where practical so their current transients do not distort the MCU or analog reference rail.

Assign communication and timing-sensitive pins only after checking the manufacturer alternate-function matrix and package drawing. Keep clock routes short, avoid routing them parallel to switching traces, and provide clean return paths. For analog acquisition, use short traces from the sensor interface, a stable reference arrangement, and controlled grounding. These measures are important because the MCU's conversion capability does not compensate for noise introduced by poor analog routing or an unstable reference.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No explicit compliance declarations for this exact ordering code were identified in the product-page summary. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before procurement.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATSAMD20J16A-AU datasheet ATSAMD20J16A-AU pinout ATSAMD20J16A-AU datasheet pdf ATSAMD20J16A-AU specifications ATSAMD20J16A 48MHz Cortex-M0+ ATSAMD20J16 64KB flash 8KB SRAM ATSAMD20J16A-AU 64-TQFP ATSAMD20J16A-AU equivalent ATSAMD20J16A-AU replacement ATSAMD20J16A-AU vs ATSAMD21J16A-CU ATSAMD20J16A-AU home automation controller ATSAMD20J16A-AU metering application ATSAMD20J16A-AU price ATSAMD20J16A-AU stock Microchip ATSAMD20J16A-AU

المكونات والمصطلحات ذات الصلة

Microchip Technology ATSAMD20J16A-AU ATSAMD20J16 ATSAMD20J18A ATSAMD20J17A ATSAMD20J14A ATSAMD20E15A ATSAMD21J16A-CU ARM Cortex-M0+ SAM D20J SAM D21J 32-bit microcontroller embedded microcontroller semiconductor 64 KB flash memory 8 KB SRAM 48 MHz 10-bit ADC 12-bit ADC 64-TQFP TQFP package family surface mount home automation utility metering
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر