ATSAME70Q19B-AN - 300MHz Cortex-M7 MCU | Microchip Technology
MPN: ATSAME70Q19B-AN ✓ نشطATSAME70Q19B-AN نظرة عامة
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ATSAME70Q19 belongs to the SAME70 flash-microcontroller family, which combines a high-performance Cortex-M7 core with floating-point hardware and embedded memory for embedded control, communications, and real-time signal-processing systems.
The primary device attributes include a 32-bit ARM Cortex-M7 processor, a maximum operating frequency of 300 MHz, a floating point unit, and 512 KB of flash memory. The 144-LQFP package provides a surface-mount form factor with 144 connection pins. These characteristics make the device suitable for designs requiring substantial processing speed and embedded control in a relatively compact industrial package.
The Cortex-M7 architecture provides a high-performance platform for interrupt-driven control, communications, and digital signal processing. The dedicated floating point unit accelerates mathematical operations that would otherwise require software emulation. Because the operating frequency reaches 300 MHz, board design must account for clock distribution, power integrity, decoupling, and signal-integrity requirements across the digital interface.
Typical uses include industrial automation, motor and motion control, communications equipment, data acquisition, and real-time control systems. In each case, the device can combine control logic and peripheral interfacing in one component. The 512 KB embedded flash also reduces dependence on external program memory when the firmware image fits within that capacity.
Use the manufacturer pin-description table when assigning PCB tracks, especially for power, ground, clock, debug, and communication signals. Preserve the required input and output decoupling placement near the device and route high-speed signals over continuous reference planes. Firmware and board designs should also be checked against the manufacturer’s startup, memory, and peripheral guidance.
This page combines the device identity, package information, memory and processor specifications, practical design considerations, and replacement guidance to support faster engineering review. It also distinguishes a true same-package alternative from options that require different footprints, board changes, or firmware redevelopment.
بدائل مباشرة لـ ATSAME70Q19B-AN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ATSAME70Q19B-AN (نفس عامل الشكل والبصمة) — يختلف في Package, USB, RoHS Status, ADC, ADC Resolution.
ATSAME70Q19B-ANT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70Q21B-AN
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70Q21B-ANT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←ATSAME70Q17B-AN
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ATSAME70Q17B-ANT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
ATSAME70Q19B-AN الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Product Family | SAME70 |
| Maximum CPU Frequency | 300 MHz |
| CPU Architecture | 32-bit ARM Cortex-M7 |
| Floating Point Unit | Yes |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| SRAM | 256 KB |
| العلبة | 144-LQFP, 20 mm x 20 mm |
| نوع التركيب | Surface mount |
| عدد الأطراف | 144 pins |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| CAN-FD Support | Yes |
| Ethernet Support | Yes |
| حالة RoHS | Compliant |
| Lead-Free Status | Lead-free |
دليل تكوين أطراف ATSAME70Q19B-AN 144-lqfp, 20 mm x 20 mm
تكوين الأطراف لـ ATSAME70Q19B-AN (حزمة 144-lqfp, 20 mm x 20 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATSAME70Q19B-AN.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATSAME70Q19B-AN مناسب لـ 6 التطبيقs: Industrial Automation Controller, Motor and Motion Control, Industrial Communications Gateway, Data Acquisition and Test Equipment, Real-Time Signal Processing, Networked Security and Access Control.
Industrial Automation Controller
The ATSAME70Q19B-AN suits industrial automation controllers that combine real-time machine control with communications and data acquisition. Its 300 MHz ARM Cortex-M7 core provides rapid task scheduling, while the hardware floating point unit accelerates calculations used in motion and process-control algorithms. The 512 KB flash memory can hold the real-time operating system, control application, and communications software without requiring a separate program-memory device. Its 12-bit ADC and DAC functions support analog sensor acquisition and control outputs. The 144-LQFP 20 mm by 20 mm package is practical for a multilayer control board, although pin assignment, grounding, and decoupling must follow the manufacturer’s layout guidance.
موصى به
Motor and Motion Control
The ATSAME70Q19B-AN is appropriate for motor-control and motion-control equipment requiring deterministic digital processing alongside high-speed analog and communication functions. The 300 MHz Cortex-M7 core can execute current-control, position, velocity, and fault-management algorithms, and the hardware floating point unit accelerates transforms and proportional-integral-derivative calculations. Twelve-bit ADC and DAC resolution supports motor-current sensing and reference generation. Using 512 KB of embedded flash allows control code, calibration data, and communication handlers to reside locally. For reliable operation, the design should isolate noisy motor-power paths from sensitive signal grounds, verify timing margins, and follow the manufacturer’s clock and decoupling recommendations.
موصى به
Industrial Communications Gateway
The ATSAME70Q19B-AN can serve as the processing element in an industrial communications gateway that must translate between fieldbus, Ethernet, and local control interfaces. Ethernet and CAN-FD support make the SAME70 platform appropriate for connected equipment, while the 300 MHz Cortex-M7 core handles protocol processing, buffering, and application logic. The 512 KB flash and 256 KB SRAM provide useful local capacity for firmware and packet buffers. Designers should allocate boot code, operating-system data, and stack space deliberately. Ethernet signal routing requires a controlled-impedance layout, separation from switching supplies, and careful return-path planning, while the debug and programming interface must remain accessible for production testing.
موصى به
Data Acquisition and Test Equipment
The ATSAME70Q19B-AN is well matched to data-acquisition and test equipment requiring fast sampling, local analysis, and flexible I/O. Its 12-bit ADC supports analog measurement, while the 300 MHz ARM Cortex-M7 core and hardware floating point unit can perform filtering, calibration, statistics, and control calculations. The 512 KB flash can store application firmware and test sequences, and the 256 KB SRAM can support acquisition buffers and working state. Designers should base sampling rates and acquisition bandwidth on the detailed electrical characteristics and peripheral timing in the manufacturer documentation. Analog inputs also require careful grounding, filtering, and layout separation from high-current digital or switching circuitry.
موصى به
Real-Time Signal Processing
The ATSAME70Q19B-AN can implement real-time signal-processing functions where deterministic response and floating-point computation are important. The 300 MHz Cortex-M7 core executes control and filtering algorithms, while the hardware floating point unit reduces the processing burden of transforms, normalization, and adaptive calculations. Its 512 KB flash stores application code, and its 256 KB SRAM accommodates samples, intermediate values, and operating-system data. Twelve-bit ADC and DAC channels provide analog interfaces where appropriate. The exact sample rate, acquisition timing, and channel count must be checked against the device’s detailed specifications. High-speed signal routing should use short paths, continuous reference planes, and controlled return currents.
موصى به
Networked Security and Access Control
The ATSAME70Q19B-AN can support networked access-control equipment that combines local decision-making with Ethernet connectivity and low-speed field interfaces. The 300 MHz Cortex-M7 processor provides capacity for protocol handling, event logging, device management, and application logic, while the 12-bit ADC and DAC provide optional analog monitoring or output functions. Embedded flash supports firmware and configuration storage, and CAN-FD can serve suitable local networks. Security implementations must include appropriate key protection, authenticated updates, and controlled debug access. Board-level Ethernet routing should preserve impedance continuity, and the final design should be reviewed against the manufacturer’s security and hardware-design guidance before deployment.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATSAME70Q19B-AN — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATSAME70Q19B-ANT | ATSAME70Q21B-AN | ATSAME70Q21B-ANT | ATSAME70Q17B-AN | ATSAME70Q17B-ANT |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Core | 32-bit ARM Cortex-M7 | 32-bit ARM Cortex-M7 | 32-bit ARM Cortex-M7 | 32-bit ARM Cortex-M7 | 32-bit ARM Cortex-M7 | 32-bit ARM Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Floating Point Unit | Yes | Yes | Yes | Yes | Yes | Yes |
| Temperature-Grade Suffix | -AN | -ANT | -AN | -ANT | -AN | -ANT |
أبرز الفروقات
- Higher-frequency Cortex-M7 processing platform (مقابلATSAME70Q17B-AN)
- Direct 512 KB flash configuration with 256 KB SRAM (مقابلATSAME70Q21B-AN)
- Matching 144-LQFP footprint across listed alternatives (مقابلATSAME70Q19B-ANT)
ملاحظات التصميم
Follow the manufacturer’s recommended power-supply and decoupling network when assigning the 144-LQFP pins. Place supported bulk and high-frequency decoupling capacitors close to the device power pins, minimize loop area, and provide clean returns to the appropriate power or ground plane. Separate noisy switching nodes and high-current return paths from analog and processor supply routes.
Use the manufacturer’s 144-LQFP land pattern and pin-description table for PCB construction. Verify pin 1 orientation, exposed thermal considerations, and every power, ground, clock, debug, and peripheral assignment before fabrication. Keep high-speed clock and communications traces short, use continuous reference planes, and avoid routing disruptive switching signals beneath sensitive analog inputs.
Do not assume that every same-family ordering code is electrically interchangeable without checking temperature grade, memory capacity, peripheral mapping, and errata information. In particular, the -AN and -ANT suffixes differ by temperature grade. When moving between SAME70Q17, SAME70Q19, and SAME70Q21 devices, rebuild the firmware project against the selected device definition and retest startup, interrupts, analog functions, and communications.
معلومات الامتثال
The manufacturer-part listing identifies the device as RoHS compliant and lead-free. Other environmental and conflict-minerals declarations require confirmation from Microchip’s current product documentation.