ATSAMS70J21B-AN - 300MHz Cortex-M7 MCU with 2MB Flash | Microchip
MPN: ATSAMS70J21B-AN ✓ نشطATSAMS70J21B-AN نظرة عامة
A flash microcontroller is a semiconductor that combines a processor core, programmable nonvolatile memory, RAM, and integrated peripherals in one device. Its position in the product hierarchy is microcontroller, embedded processor, semiconductor, and programmable control component. The Cortex-M7 architecture provides a high-performance platform for real-time control while retaining a compact integrated design and deterministic peripheral access. The Floating Point Unit accelerates floating-point calculations used in control loops, filtering, and industrial data processing.
The ATSAMS70J21B-AN combines a 300 MHz processor with 2 MB of Flash and 384 KB of SRAM, giving embedded software enough memory for larger control tables, communication stacks, and signal-processing tasks. Integrated PWM, ADC, DAC, and DMA blocks reduce external component requirements and allow transfers to occur with limited processor intervention. The 16-bit external data bus provides a dedicated path for external memory or parallel peripherals, while operating temperatures of -40°C to 105°C support industrial equipment.
Microchip identifies the S70J21 as a flash-microcontroller family based on the 32-bit ARM Cortex-M7 processor with an FPU. The 2 MB Flash is organized as 2M x 8 bits, and the maximum operating frequency is 300 MHz. These characteristics place the device between general-purpose low-power microcontrollers and more complex application processors, providing substantial compute and peripheral capacity without requiring an external microprocessor.
Typical applications include industrial automation controllers, motor-control and power-conversion systems, communications equipment, data-acquisition units, and real-time embedded platforms. The ADC and DMA resources support sampled sensor systems, PWM supports precise timing and actuator control, and the DAC supports analog waveform generation. The 64-LQFP package also provides a practical option for designs requiring a conventional leaded footprint rather than a very fine-pitch ball grid array.
Designers should verify power sequencing, decoupling, clock configuration, and the complete 64-pin assignment against the manufacturer datasheet before releasing PCB artwork. The low 1.08 V to 1.32 V operating supply is a core-system requirement, so the complete board architecture must provide the appropriate rails and sequencing rather than relying on a single unregulated supply.
This page combines the manufacturer family information, exact device characteristics, package details, sourcing guidance, replacement criteria, and practical engineering considerations. It also distinguishes genuine pin-compatible alternatives from functionally similar Cortex-M7 devices whose packages or peripheral arrangements prevent drop-in replacement.
بدائل مباشرة لـ ATSAMS70J21B-AN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلATSAMS70J21B-AN الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 with Floating Point Unit |
| Maximum Operating Frequency | 300 MHz |
| Architecture | 32-bit |
| Flash Memory | 2 MB (2M x 8 bits) |
| SRAM | 384 KB |
| جهد التغذية التشغيلي | 1.08 V to 1.32 V |
| درجة حرارة التشغيل | -40°C to 105°C |
| External Data Bus Width | 16-bit |
| ADC | Integrated |
| DAC | Integrated |
| DMA Controller | Integrated |
| PWM | Integrated PWM channels |
| العلبة | 64-LQFP (S-PQFP-G64), 10 mm x 10 mm |
| عدد الأطراف | 64 pins |
| نوع التركيب | Surface mount |
| Floating Point Unit | Yes |
| Industrial Temperature Grade | Yes |
دليل تكوين أطراف ATSAMS70J21B-AN 64-lqfp (s-pqfp-g64), 10 mm x 10 mm
تكوين الأطراف لـ ATSAMS70J21B-AN (حزمة 64-lqfp (s-pqfp-g64), 10 mm x 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATSAMS70J21B-AN.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATSAMS70J21B-AN مناسب لـ 6 التطبيقs: Industrial Automation Controller, Motor and Power Control, Data Acquisition System, Communications Gateway, Real-Time Signal Processing, Embedded Test and Measurement.
Industrial Automation Controller
The ATSAMS70J21B-AN fits industrial automation controllers that combine fast control loops with local data acquisition. Its 300 MHz ARM Cortex-M7 core and Floating Point Unit can execute complex filtering and motion-control calculations, while the 384 KB SRAM supports working buffers and task state. The integrated ADC, DAC, PWM, and DMA blocks allow sensor data to be converted and transferred with limited processor involvement. With a -40°C to 105°C rating, the device also supports factory equipment operating across extended ambient temperatures.
موصى به
Motor and Power Control
The ATSAMS70J21B-AN is suitable for motor-control and power-conversion subsystems that require deterministic timing and mixed analog and digital control. Its PWM channels support gate-drive and power-stage timing, the ADC provides feedback measurement, and the DAC can generate control references. The 300 MHz Cortex-M7 core with FPU executes compensation and control algorithms, while DMA reduces interrupt overhead during high-rate feedback transfers. Designers should still account for isolation, protection, switching-node layout, and thermal requirements outside the MCU.
موصى به
Data Acquisition System
The ATSAMS70J21B-AN can serve as the central processor in a high-rate data-acquisition system because it combines a 300 MHz core with integrated ADC, DAC, and DMA resources. DMA transfers sampled or generated data without requiring every word to pass through CPU interrupt handling, leaving processing capacity available for filtering, calibration, and protocol management. The 2 MB Flash supports firmware and configuration storage, while 384 KB SRAM provides space for working data. Analog front-end bandwidth, reference accuracy, and connector design remain important system-level constraints.
موصى به
Communications Gateway
The ATSAMS70J21B-AN can serve as an embedded communications gateway when a product needs real-time protocol handling alongside peripheral control. Its 300 MHz Cortex-M7 processor and 384 KB SRAM provide resources for Ethernet, serial, or fieldbus software stacks when the required interfaces are supported by the complete device configuration. The 2 MB Flash offers room for firmware, network tables, and security data. External transceivers, clocking, isolation, and matching networks must be added as required by the selected communication standard.
موصى به
Real-Time Signal Processing
The ATSAMS70J21B-AN is appropriate for real-time signal-processing tasks that benefit from a 300 MHz ARM Cortex-M7 with an FPU. The processor can handle filters, transforms, and control calculations while the integrated ADC, DAC, and DMA resources support signal movement. A 16-bit external data bus can also connect to compatible parallel memory or peripheral hardware, although electrical timing and loading must be reviewed carefully. This combination makes the device useful in embedded processing modules where deterministic execution and integrated acquisition are valuable.
موصى به
Embedded Test and Measurement
The ATSAMS70J21B-AN can form the control core of an embedded measurement instrument that combines acquisition, waveform generation, and digital processing. The ADC and DAC support analog measurement and stimulus functions, PWM assists timing functions, and the 300 MHz core handles local analysis. Its 2 MB Flash and 384 KB SRAM are useful for calibration tables, configuration, buffers, and firmware. Precision analog components, stable references, low-noise power, and calibrated stimulus paths remain necessary to achieve meaningful measurement accuracy.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATSAMS70J21B-AN — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Brand | Microchip Technology |
| Package | 64-LQFP (10 mm x 10 mm) |
| Processor Core | ARM Cortex-M7 with FPU |
| Maximum Frequency | 300 MHz |
| Flash Memory | 2 MB (2M x 8 bits) |
| SRAM | 384 KB |
| Operating Supply Voltage | 1.08 V to 1.32 V |
| Operating Temperature | -40°C to 105°C |
| Integrated Conversion Resources | ADC, DAC, PWM, and DMA |
| External Data Bus | 16-bit |
أبرز الفروقات
- High-performance Cortex-M7 integration (مقابلGeneral-purpose 32-bit microcontroller)
- Substantial integrated memory (مقابلLower-memory Cortex-M controller)
- Mixed-signal control capability (مقابلDigital-only microcontroller option)
ملاحظات التصميم
The 1.08 V to 1.32 V operating range requires a regulated low-voltage rail with correct sequencing and adequate transient response. Place the required decoupling capacitors close to the device's supply and ground terminals, keep high-current return currents out of sensitive signal paths, and verify the complete power tree against the manufacturer's recommended schematic. External I/O voltage compatibility must be checked independently because the core operating range does not define every peripheral pin's permissible voltage.
Preserve the 64-LQFP escape geometry and follow the manufacturer land pattern for a 10 mm by 10 mm package. Shorten clock, debug, reset, and high-speed interface routes, provide a continuous ground reference where appropriate, and route switching or high-current outputs separately from ADC and communication inputs. Because the 16-bit external data bus can be timing-sensitive, validate trace length, topology, loading, and return paths with the complete system configuration.
Do not treat a similar Cortex-M7 controller as a drop-in MCU solely because it uses the same core. A valid replacement must match the package, all 64 terminal assignments, memory, voltage, temperature grade, clocking, peripheral mapping, and programming considerations. Confirm ordering suffixes carefully: packaging and temperature indicators can change the exact part even when the base family name remains similar.
معلومات الامتثال
The product is specified for industrial temperature operation, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration appears in the cited product information.