ATTINY28V-1PU - 2KB 8-Bit AVR MCU | Microchip Technology
MPN: ATTINY28V-1PU ✓ نشطATTINY28V-1PU نظرة عامة
An 8-bit microcontroller is a programmable semiconductor that executes instructions from nonvolatile flash memory and uses I/O pins to control sensors, indicators, relays, actuators, and communications interfaces. The ATTINY28 belongs to the AVR family and the broader hierarchy of embedded microcontroller, semiconductor, and programmable-control-device products. Its compact 28-pin package supports both digital and analog signal-chain integration without requiring a complex external processor.
The device provides 2 KB of flash memory organized as 1K by 16 bits, a 1.2 MHz maximum clock, and an operating-voltage range of 1.8 V to 5.5 V. The PDIP package is suitable for through-hole assembly, prototyping, educational platforms, and applications that favor a socketable or manually assembled controller. Its stated 2.5 V, 3.3 V, and 5 V operating arrangements simplify supply planning across industrial, consumer, and embedded-control products.
The AVR RISC architecture provides an 8-bit processing platform optimized for compact control tasks. The 2 KB program-memory capacity is appropriate for small firmware images containing initialization, periodic measurement, decision logic, and output-control routines. Because the program memory is limited, developers should avoid unnecessary library code and select peripherals according to the actual pin and memory requirements of the end product.
Typical uses include small industrial controllers, building-automation endpoints, status indicators, sensor interfaces, LED drivers, and compact embedded modules. The 28-pin PDIP format is especially useful where hand soldering, socket compatibility, or straightforward inspection is more important than the smallest possible surface-mount footprint. A 3.3 V application should also account for the connected peripherals and ensure that their signal levels remain compatible with the selected supply voltage.
Decoupling and layout remain important despite the device's modest clock rate. Place the required supply capacitors close to the power pins, route high-current return paths efficiently, and keep switching-node traces away from sensitive input pins. Prototype designs should confirm oscillator, reset, programming, and unused-pin behavior against the manufacturer pin-description table before layout release.
This page combines key electrical specifications, package guidance, application-oriented design considerations, and a qualified replacement assessment. It also distinguishes verified device characteristics from fields that require engineering confirmation, helping teams evaluate ATTINY28V-1PU for small embedded-control designs without overlooking memory, voltage, package, or sourcing constraints.
بدائل مباشرة لـ ATTINY28V-1PU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
ATTINY28V-1PI
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY28V-1PU الحدود القصوى والخصائص الكهربائية
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| Flash Program Memory | 2 KB (1K x 16 bits) |
| أقصى تردد للساعة | 1.2 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Nominal Operating Voltages | 2.5 V, 3.3 V, and 5 V |
| Package Type | 28-pin PDIP |
| نمط التركيب | Through-hole |
| Program Memory Organization | 1K x 16 bits |
| Core Architecture | AVR 8-bit RISC |
| Product Family | ATtiny AVR |
| Manufacturer | Microchip Technology |
دليل تكوين أطراف ATTINY28V-1PU 28-pin pdip
تكوين الأطراف لـ ATTINY28V-1PU (حزمة 28-pin pdip). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATTINY28V-1PU.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATTINY28V-1PU مناسب لـ 6 التطبيقs: Small Industrial Control Module, LED Status and Lighting Controller, Sensor Interface and Data Logger, Building Automation Endpoint, Motorized Valve or Actuator Controller, Educational and Rapid Prototyping Board.
Small Industrial Control Module
The ATTINY28V-1PU fits small industrial control modules that monitor discrete inputs and operate relays, indicators, or simple actuators. Its 8-bit AVR core, 2 KB flash memory, and 1.2 MHz clock are sufficient for periodic sampling, debounce logic, state-machine control, and output updates without a larger processor. The 28-pin PDIP package also simplifies through-hole assembly and inspection. A 3.3 V implementation can use the stated 1.8 V to 5.5 V operating range, but relay drivers and external transients should be isolated from the controller's supply and input pins.
موصى به
LED Status and Lighting Controller
The ATTINY28V-1PU can control several LED status indicators or a modest lighting pattern in panels, signage, and compact equipment. Its 2 KB flash memory is appropriate for timing tables, animation state, and straightforward button handling, while the 1.2 MHz AVR core provides ample execution margin for simple tasks. The 28-pin PDIP format is convenient for prototypes and manually assembled boards. Designers should use appropriate current-limiting resistors or transistor drivers, confirm each I/O's source and sink limits from the datasheet, and keep high-current LED return paths away from sensitive controller ground connections.
موصى به
Sensor Interface and Data Logger
ATTINY28V-1PU applications include compact sensor nodes that sample slow-changing signals, apply thresholds, and store or forward a small set of measurements. Its 1.8 V to 5.5 V operating range supports 2.5 V, 3.3 V, and 5 V sensor arrangements, and the 8-bit architecture is suitable for basic conditioning and digital filtering. The 2 KB flash limit requires disciplined firmware, so larger libraries, long event logs, and protocol stacks should be avoided. External memory may be needed for sustained logging, with supply decoupling and analog-input layout handled according to the manufacturer guidance.
موصى به
Building Automation Endpoint
The ATTINY28V-1PU is appropriate for compact building-automation endpoints that combine a few digital inputs, an indicator, and a low-speed serial interface. A 3.3 V rail falls within the device's 1.8 V to 5.5 V operating range, and the 28-pin PDIP package supports straightforward through-hole assembly in low-volume controller boards. The 1.2 MHz processor can execute polling, debounce, timeout, and actuator-command logic. Firmware must remain compact, and isolated field wiring should use suitable protection so external switching events do not corrupt the supply rail or controller inputs.
موصى به
Motorized Valve or Actuator Controller
A compact valve, pump, or actuator controller can use the ATTINY28V-1PU for command processing, travel-limit inputs, timed motion, and fault-state output. The device's 2 KB flash is suitable for a bounded control routine, while its 28-pin PDIP package makes prototype wiring and socket-based servicing practical. The controller should not directly drive an inductive motor load; use an appropriate transistor or MOSFET driver, flyback protection, and separate logic returns where necessary. The 1.8 V to 5.5 V range allows integration with 3.3 V or 5 V logic, subject to peripheral limits.
موصى به
Educational and Rapid Prototyping Board
The ATTINY28V-1PU is well suited to educational microcontrollers, logic demonstrations, and rapid prototyping because it combines a familiar through-hole 28-pin PDIP format with a 1.2 MHz AVR core. Students can access flash, I/O, timers, and interrupts through a socket or perfboard without handling a fine-pitch surface-mount package. The 2 KB program-memory limit encourages compact examples and makes firmware-size control visible during instruction. A 3.3 V lab supply is compatible with the stated operating range, but beginners should confirm programming signals, reset behavior, and every pin assignment against the manufacturer documentation.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATTINY28V-1PU — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATTINY28V-1PI |
|---|---|---|
| Package | 28-pin PDIP | 28-pin PDIP |
| Brand | Microchip Technology | Microchip Technology |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Flash Program Memory | 2 KB (1K x 16 bits) | 2 KB |
| Maximum Clock Frequency | 1.2 MHz | 1.2 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Product Family | ATtiny AVR | ATtiny AVR |
| Mounting Style | Through-hole | Through-hole |
| Order-Code Suffix | -1PU | -1PI |
أبرز الفروقات
- Exact same-package family replacement path (مقابلATTINY28V-1PI)
- Direct 3.3 V system integration (مقابلATTINY28V-1PI)
- Straightforward through-hole integration (مقابلATTINY28V-1PI)
ملاحظات التصميم
Place the required input and bypass capacitors directly beside the corresponding power and ground pins, and keep their return-current loops compact. Use the manufacturer's pin table to identify the supply pins rather than relying only on the package outline. Programmed or boot-strapped pins can become outputs after reset, so route them away from external circuitry that may force a conflicting voltage during startup.
Although the controller clock is rated up to 1.2 MHz, nearby relay drivers, motor switches, or LED channels can still create fast current transients. Keep high-current switching paths physically separated from sensor and control inputs, provide a solid local ground connection, and place input filtering at the connector where interference enters. These measures prevent the relatively slow controller from responding to false edges or suffering supply disturbance.
The 2 KB flash capacity is the most visible design constraint. Estimate the final compiled image before layout release, remove unused library routines, and avoid adding features that cannot fit without changing the microcontroller family. Do not assume that a controller with the same family name and package has identical fuse defaults, interrupt behavior, or peripheral assignments; verify each relevant configuration item in the ATTINY28V documentation.
معلومات الامتثال
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact order code. Confirm current environmental and qualification documentation before production release.