ATXMEGA192D3-MH - 32MHz 192KB AVR MCU | Microchip
MPN: ATXMEGA192D3-MH ✓ نشطATXMEGA192D3-MH نظرة عامة
An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The ATXMEGA192D3 belongs to the AVR XMEGA family and uses a Harvard-style AVR architecture that supports both byte-oriented and 16-bit instruction processing. It sits above basic 8-bit AVR devices in processing performance, memory capacity, and event-handling capability while retaining the familiar AVR software ecosystem.
The device combines 192 KB of ISP Flash, including an 8 KB boot-code section, with 2 KB of EEPROM and 16 KB of SRAM. Read-while-write Flash operation allows code execution during programming in supported regions. Its four-channel event system, programmable multilevel interrupt controller, and 16-bit real-time counter improve responsiveness in real-time control, measurement, and communication-oriented designs.
Five flexible 16-bit timer/counter modules provide compare modes and PWM generation, while the peripheral set is intended to reduce the need for external control components. The 50 GPIO lines make the microcontroller suitable for systems requiring numerous digital inputs, outputs, and mixed signal interfaces without immediately exhausting package pin resources. ISP programming and supported debugging workflows simplify firmware development and production programming.
Typical uses include industrial automation, building and access controls, sensor acquisition, compact motor control, connected equipment, and low-power embedded instruments. The 32 MHz operating speed is useful for event-driven control loops, while the 1.6 V to 3.6 V supply range supports low-voltage portable systems. Designers should verify peripheral availability, pin multiplexing, flash endurance, and analog performance against the manufacturer datasheet before finalizing a PCB layout.
A key design consideration is the exposed-pad thermal and electrical interface of the 64-pin QFN package. Place the exposed pad according to the manufacturer land pattern, connect it to the appropriate ground plane, and provide uninterrupted copper for heat dissipation. Decoupling and signal-routing practices remain essential because the combination of high clock speed, dense GPIO assignment, and a 9 mm square footprint can constrain escape routing.
This product page organizes the verified device identity, memory configuration, package information, and engineering context for faster component evaluation. It also distinguishes exact stock-keeping information from package and ordering variants, helping engineers identify the ATXMEGA192D3-MH without confusing it with similar XMEGA192 or XMEGA256 devices.
بدائل مباشرة لـ ATXMEGA192D3-MH — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلATXMEGA192D3-MH الحدود القصوى والخصائص الكهربائية
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Program Memory Type | ISP Flash |
| Flash Memory | 192 KB |
| Flash Organization | 96K x 16 |
| Boot Code Section | 8 KB |
| EEPROM Memory | 2 KB |
| SRAM | 16 KB |
| General-Purpose I/O | 50 lines |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Timer/Counter Count | 5 |
| Timer/Counter Resolution | 16-bit |
| Event System Channels | 4 |
| Real-Time Counter Resolution | 16-bit |
| العلبة | 64-pin QFN, 9 mm x 9 mm, exposed pad |
| Programming Interface | ISP |
| Read-While-Write Flash | Supported |
دليل تكوين أطراف ATXMEGA192D3-MH 64-pin qfn, 9 mm x 9 mm, exposed pad
تكوين الأطراف لـ ATXMEGA192D3-MH (حزمة 64-pin qfn, 9 mm x 9 mm, exposed pad). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATXMEGA192D3-MH.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATXMEGA192D3-MH مناسب لـ 6 التطبيقs: Industrial Automation Controller, Sensor Acquisition and Monitoring, Building Access Control, Motor and PWM Control, Connected Low-Power Equipment, Portable Test and Measurement.
Industrial Automation Controller
The ATXMEGA192D3-MH fits compact industrial automation modules that coordinate sensors, digital I/O, timing functions, and local communications. Its 32 MHz clock supports responsive control logic, while 192 KB of ISP Flash accommodates networking stacks, diagnostics, configuration data, and application firmware. The five flexible 16-bit timer/counter modules support motor timing, pulse measurement, and PWM generation, and the four-channel event system can connect peripherals for deterministic event routing. With 50 GPIO lines, the controller reduces the need for external logic in a densely connected machine-control board.
موصى به
Sensor Acquisition and Monitoring
The ATXMEGA192D3-MH is suitable for multi-channel sensor acquisition systems that need local filtering, timing, event capture, and data preparation. Its 50 GPIO lines permit connections to digital sensors, switches, and status inputs, while five 16-bit timer/counter modules can measure periods, pulses, or duty cycles. The 16 KB SRAM and 192 KB ISP Flash provide room for buffered measurements and firmware, and the event system can coordinate sampling across multiple channels. Engineers should verify the required analog and communications peripherals in the device documentation before selecting it for precision analog measurement.
موصى به
Building Access Control
The ATXMEGA192D3-MH can serve as the central controller in an electronic access system handling readers, request-to-exit inputs, lock drivers, indicators, and keypad interfaces. Its 192 KB Flash supports protocol handling, credential logic, diagnostics, and updateable application code, while 16 KB SRAM can buffer messages and transactions. The 16-bit timer/counter resources are useful for pulse-width measurement and timed access functions, and the programmable interrupt structure supports responsive event handling. A secure product design should add appropriate authentication, tamper protection, and supply-chain controls.
موصى به
Motor and PWM Control
The ATXMEGA192D3-MH is appropriate for compact motor-control and auxiliary PWM systems where several timing outputs must coordinate with sensor inputs. Five 16-bit timer/counter modules provide compare channels and PWM generation, enabling speed, position, or duty-cycle control with reduced external logic. At 32 MHz, the AVR XMEGA core can manage multiple control loops and communication tasks, while the event system helps coordinate timer events with other peripherals. Final current capability, pin multiplexing, and thermal requirements depend on the external power stage and must be validated at the system level.
موصى به
Connected Low-Power Equipment
The ATXMEGA192D3-MH works well as a supervisory controller in low-power connected equipment that combines local I/O, event handling, and a compact communications subsystem. Its 1.6 V to 3.6 V operating range supports low-voltage designs, and the 16-bit timers can implement accurate periodic wake-ups, sensor timing, and communication pacing. The 192 KB ISP Flash supports larger protocol stacks and field-upgrade logic, while read-while-write capability can aid controlled updates in supported regions. Power consumption and wake-up behavior should be evaluated using the manufacturer operating-mode data.
موصى به
Portable Test and Measurement
The ATXMEGA192D3-MH can serve as the control core of a portable measurement instrument that combines stimulus, data capture, display control, and communications. Its 32 MHz performance and five 16-bit timer/counters enable accurate timing, pulse generation, and sampling coordination, while 192 KB Flash accommodates calibration, instrument control, and communications firmware. The 16 KB SRAM supports temporary measurement buffers, and 50 GPIO lines enable flexible front-panel and sensor interfaces. Analog accuracy, reference quality, noise performance, and display timing must be established with the appropriate peripheral and layout analysis.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATXMEGA192D3-MH — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Brand | Microchip Technology |
| Package | 64-pin QFN, 9 mm x 9 mm, exposed pad |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 192 KB ISP Flash |
| Flash Organization | 96K x 16 |
| Boot Code Section | 8 KB |
| EEPROM Memory | 2 KB |
| SRAM | 16 KB |
| General-Purpose I/O | 50 lines |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Timer/Counter Resources | Five flexible 16-bit timer/counters |
| Event System | 4 channels |
أبرز الفروقات
- Substantial on-chip memory for XMEGA-class control (مقابلATXMEGA192C3-MHR)
- Memory-capacity choice within the XMEGA D3 family (مقابلATXMEGA256D3-MH)
- High peripheral density in a compact package (مقابلATXMEGA256A3BU-MH)
ملاحظات التصميم
The 64-pin QFN package includes an exposed pad that must be connected to the manufacturer-specified pad net and tied to a low-impedance ground plane. Keep thermal-via placement consistent with the package drawing and preserve nearby copper area. Estimate junction behavior from the calculated regulator dissipation and the applicable thermal model after finalizing PCB stackup and copper; do not assume the exposed pad eliminates the need for thermal validation.
Use the manufacturer package drawing and pin table to create the 9 mm by 9 mm QFN footprint rather than substituting a generic 64-pin library symbol. Verify pad dimensions, exposed-pad geometry, solder-mask clearance, and paste stencil design before fabrication. Confirm that every selected peripheral signal is available on the chosen pins because alternate-function multiplexing can change the board-level assignment without changing the package.
Place the required supply and decoupling capacitors close to the device power pins, with each capacitor connected to the shortest practical ground return. Follow the manufacturer guidance for the number, voltage rating, and placement of decoupling components. Because the ATXMEGA192D3-MH operates from 1.6 V to 3.6 V, include startup sequencing and supply ramp considerations in the power design and validate analog or timing-sensitive behavior across the intended voltage range.
Route clock-sensitive and high-speed communication signals over continuous reference planes and minimize stubs, vias, and parallel long traces. The 32 MHz CPU clock is central to many peripherals, so clock distribution and decoupling deserve early review. Keep programming, debug, and reset lines away from noisy analog or switching nodes, and use controlled signal levels when interfacing the microcontroller with external equipment.
معلومات الامتثال
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact MPN.