CD4029BCN - 4-Bit Binary/Decade Up/Down Counter | onsemi
MPN: CD4029BCN ✓ نشطCD4029BCN نظرة عامة
A CMOS up/down counter is a digital logic IC that increments or decrements a multibit numerical state on each active clock transition. The CD4029 belongs to the broader CD4000 CMOS logic family, combining a four-stage counting core, programmable counting direction, selectable binary or decade operation, preset control, and reset control. This makes it part of the counter and divider hierarchy within general-purpose digital logic and system timing.
The principal functional features include selectable binary or decade counting, programmable up or down direction, asynchronous reset, and individual preset inputs for the four counted bits. According to the Fairchild Semiconductor CD4029BCN datasheet, the counting mode is selected by the voltage applied to the binary/decade input. Individual Jan preset inputs allow a starting count to be loaded before normal counting resumes, which is useful for programmable timing and sequencing systems.
The CD4029BCN is built around a four-stage CMOS counter with carry-in and carry-out control for extending counting or arithmetic sequences. Its positive-edge triggering gives the circuit a defined response to the rising clock transition, while the direction input selects whether the four-bit output moves toward higher or lower values. The device is intended for conventional CMOS supply operation; exact voltage limits, operating temperature range, and propagation-delay limits should be taken from the manufacturer datasheet before final circuit design.
Typical applications include binary frequency division, decade stepper and sequencing circuits, programmable counters, digital timing modules, industrial control logic, and test equipment. It can also serve as a compact bidirectional state machine when a system needs a repeatable count sequence initiated from a preset value. Because the counter supports both binary and decade modes, one package can implement different numerical conventions without changing the physical footprint.
The most important PCB consideration is correct orientation and unambiguous handling of the control inputs. Use the manufacturer pin-description table when routing the clock, carry, preset, reset, mode, and direction signals. Place bypass capacitors close to the supply pins and keep clock traces away from noisy switching nodes. In designs using individual presets, account for switch bounce or ensure that preset inputs remain stable while preset enable is active.
This page combines function, package, and lifecycle details with a focused replacement assessment and practical design guidance. It also identifies where alternative manufacturer documentation should be consulted for electrical limits and timing details that are not stated in the distributor summaries.
بدائل مباشرة لـ CD4029BCN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع CD4029BCN (نفس عامل الشكل والبصمة) — يختلف في Counter Type, Logic Family, Package.
CD4029BE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←CD4029BCN الحدود القصوى والخصائص الكهربائية
| Counter Type | 4-bit presettable binary/decade up/down counter |
| Counting Modes | Binary or BCD decade |
| Count Direction | Up or down |
| Clock Edge | Positive edge |
| Number of Count Stages | 4 stages |
| Output Width | 4 bits |
| Reset Function | Asynchronous reset |
| Preset Function | Individual preset inputs for four counted bits |
| Carry Control | Carry-in and carry-out |
| Logic Family | CD4000 CMOS series |
| العلبة | 16-PDIP (N16E) |
| Package Width | 0.300 in (7.62 mm) body width |
| نوع التركيب | Through-hole |
| Package Standard | JEDEC MS-001 |
دليل تكوين أطراف CD4029BCN jedec ms-001
تكوين الأطراف لـ CD4029BCN (حزمة jedec ms-001). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CD4029BCN.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CD4029BCN مناسب لـ 6 التطبيقs: Binary Frequency Divider, Decimal Step Sequencer, Programmable Timer, Industrial Sequence Controller, Digital Test Equipment, Consumer Logic Control.
Binary Frequency Divider
The CD4029BCN divides an incoming clock into a lower binary frequency because its four-stage counter can operate in binary mode and supports programmable up/down direction. The 16-PDIP package makes it straightforward to prototype on a through-hole logic board. For a divide-by-16 arrangement, the four counted outputs provide the binary state, while the carry output can indicate terminal count. Confirm the maximum operating clock frequency and propagation delay in the Fairchild Semiconductor datasheet, and keep the clock trace short to reduce susceptibility to timing jitter and unwanted transitions.
موصى به
Decimal Step Sequencer
The CD4029BCN is useful for decimal sequencing because its mode input selects decade counting while the direction input controls whether the four-bit state advances or retreats. A preset value establishes the starting point, allowing repeatable 0-through-9 style sequences for timing or control logic. The carry output provides a natural rollover indication, while individual preset inputs permit a custom initial state. For mechanical switches, add debouncing and ensure the preset controls are stable before the next active clock edge.
موصى به
Programmable Timer
The CD4029BCN can implement a programmable timer by loading a preset count and then counting toward a terminal value under a fixed clock. Carry-in and carry-out support extending the count interval or synchronizing multiple timing stages, while binary mode permits values up to the full four-bit range. The positive-edge clock behavior simplifies state interpretation, but the design must respect setup and hold requirements around preset, mode, and direction inputs. Use the manufacturer timing information to establish the minimum clock period and account for propagation delay in the output transition.
موصى به
Industrial Sequence Controller
The CD4029BCN fits legacy industrial sequence control because it combines count direction, operating-mode selection, asynchronous reset, and preset loading in one CMOS counter. A fixed clock advances the state machine while external logic determines when presets or resets occur. The 16-PDIP package offers generous lead spacing for through-hole assembly and inspection. For long-life industrial equipment, verify the exact temperature range, supply limits, and timing margins, and avoid placing the clock near high-current switching stages to reduce false count transitions.
موصى به
Digital Test Equipment
The CD4029BCN can serve as a programmable count-and-compare element in simple digital test equipment, dividing a reference clock and exposing four count bits for comparison with a DUT response. Binary or decade selection allows the same board to support hexadecimal-oriented instrumentation or decimal display sequences. Carry-out provides an overflow indication during measurements. Keep the reference clock clean, latch comparison outputs when required, and use the manufacturer propagation-delay values to calculate the maximum reference frequency for reliable timing measurements.
موصى به
Consumer Logic Control
The CD4029BCN can implement compact counting and sequencing functions in older or purpose-built consumer electronics, including appliance timers, step selectors, and repetitive control sequences. Decade mode supports decimal-oriented operation, while presets let the circuit begin each operating cycle at a defined count. The through-hole N16E package supports repair-oriented and prototype layouts. Confirm the device operating-temperature grade and supply range for the enclosure environment, and provide stable reset and preset levels to prevent an uncontrolled count during power-up or control-switch transitions.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ CD4029BCN — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CD4029BE |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Package | 16-PDIP (N16E) | 16-PDIP |
| Counter Width | 4 bits | 4 bits |
| Counting Modes | Binary or decade | Binary or decade |
| Count Direction | Up or down | Up or down |
| Clock Edge | Positive edge | Positive edge |
| Reset Function | Asynchronous reset | Asynchronous reset |
أبرز الفروقات
- Combines programmable counting direction and numerical mode in one counter (مقابلCD4029BE)
- Uses a serviceable through-hole package for prototype and repair layouts (مقابلCD4029BE)
- Supports individually programmable preset states (مقابلCD4029BE)
ملاحظات التصميم
Route the clock as a short, clean trace and keep it away from switching-node and relay-drive paths. The CD4029BCN changes state on the positive clock edge, so excessive clock crosstalk can create an unintended count transition. Use a ground reference plane, place the supply bypass capacitor at the device power pins, and preserve the manufacturer's recommended input setup and hold conditions around mode, direction, preset, and reset controls.
Do not assume that matching the 16-pin footprint proves complete interchangeability. Verify pin names, asynchronous reset behavior, positive-edge triggering, carry-in and carry-out polarity, preset timing, and operating-voltage limits for both the CD4029BCN and the proposed replacement. A functional comparison table alone is not enough for production substitution; each timing and logic parameter must remain acceptable over the complete supply and temperature range.
Place the power-supply bypass capacitor directly beside the supply and ground pins, with a short return path to the device. CMOS counters can experience unintended current transitions during output switching, so minimizing supply-loop area helps maintain a stable counting rail. Confirm whether a larger local capacitor is needed for slow or noisy supply sources using the manufacturer's recommended-decoupling guidance and the actual switching activity of the board.
Individual preset inputs and the preset-enable control must remain stable during the preset operation. If those signals originate from mechanical switches, implement suitable debouncing and avoid allowing switch bounce near an active clock edge. Likewise, keep the direction and binary/decade inputs quiet during count transitions. These controls define the sequence state, so their timing deserves attention even when the clock itself is clean.
معلومات الامتثال
The package is identified as JEDEC MS-001, package number N16E. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified for the exact MPN and remain unknown.