CS8415A-CS - 96 kHz Digital Audio Receiver | Cirrus Logic
MPN: CS8415A-CS ✗ انتهى عمره الإنتاجيCS8415A-CS نظرة عامة
A digital audio interface receiver is an interface IC within the broader semiconductor and audio-processing hierarchy. Its function is to recover a serial digital audio stream from a source such as a professional audio device, optical or coaxial digital output, or home-theater interface. The recovered audio data and associated status information are then presented to a digital signal processor, converter, receiver, or control system. Cirrus Logic positions the CS8415A as a bridge between standardized digital-audio transports and downstream embedded audio processing.
The CS8415A's principal system features include support for seven input channels, operation through 96 kHz, and compatibility with four digital-audio interface standards. Its serial output provides a direct path for decoded audio data, while the four-wire microcontroller port allows a host processor to configure the receiver and retrieve channel-status or user data. Blocking the metadata into readable buffers reduces the burden placed on the host software and makes the receiver suitable for systems that need both audio transport and control information.
The receiver uses a monolithic CMOS implementation and accepts the standard digital-audio formats associated with professional and consumer equipment. Because the same receiver can decode several standards, a designer can simplify multi-format input handling while preserving a common internal audio path. The seven-channel capability also allows multiple sourced channels to be selected within the system, rather than requiring a separate physical interface for every transport or source. Exact clocking, voltage, channel-routing, and lock-performance details should be confirmed in the manufacturer datasheet before finalizing a new design.
Typical applications include digital-audio receivers, surround-sound processors, professional audio equipment, home-theater systems, digital mixers, and audio interface converters. It is especially useful when a board must accept IEC 60958, S/PDIF, EIAJ CP1201, or AES3 sources while exposing decoded audio and channel metadata to a microcontroller or digital signal processor. Companion devices in digital-audio ecosystems include interface transceivers and audio codecs, selected according to the board's physical audio architecture.
A critical design step is to verify the CS8415A-CS pin arrangement, supported input rates, electrical limits, and serial-interface timing directly from the manufacturer datasheet before PCB routing. The four-wire control port and serial audio output require careful signal-integrity planning, including short traces, stable supply distribution, and clean return paths. Designers should also confirm clock and format compatibility with the downstream processor.
This product page consolidates the known CS8415A-CS function, interface standards, packaging, lifecycle information, sourcing paths, and design considerations. It also distinguishes verified technical attributes from parameters that must be checked in the datasheet, helping engineers plan receiver architecture without overlooking packaging, metadata handling, or control-interface requirements.
بدائل مباشرة لـ CS8415A-CS — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
CS8415A-CSZ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CS8415A-CSR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CS8415A-CS الحدود القصوى والخصائص الكهربائية
| Product Type | Digital audio interface receiver |
| Maximum Stated Sampling Rate | 96 kHz |
| Input Channel Count | 7 channels |
| Supported Audio Standards | IEC 60958, S/PDIF, EIAJ CP1201, AES3 |
| Process Technology | CMOS |
| Digital Audio Output | Serial digital audio output port |
| Control Interface | 4-wire microcontroller port |
| Channel Status Buffering | Block-sized buffers |
| User Data Buffering | Block-sized buffers |
| العلبة | 28-pin SOIC |
| عدد الأطراف | 28 pins |
| نوع التركيب | Surface mount |
دليل تكوين أطراف CS8415A-CS 28-pin soic
تكوين الأطراف لـ CS8415A-CS (حزمة 28-pin soic). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CS8415A-CS.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CS8415A-CS مناسب لـ 6 التطبيقs: Home-Theater Digital Audio Input, Professional Digital Audio Receiver, Digital Audio Mixer, Surround-Sound Processor, Audio Interface Converter, Digital Recording Equipment.
Home-Theater Digital Audio Input
The CS8415A-CS is suitable for a home-theater receiver that accepts IEC 60958, S/PDIF, EIAJ CP1201, or AES3 digital-audio sources. Its seven-channel capability supports centralized source selection, while the serial output can feed a downstream decoder or digital signal processor. Channel-status and user data are placed in block-sized buffers, allowing the controlling microcontroller to retrieve metadata without decoding every byte independently. Because this is an obsolete family, the design should preserve a route to the original part if its 28-pin SOIC footprint and legacy control scheme are already established.
موصى به
Professional Digital Audio Receiver
In professional audio equipment, the CS8415A-CS can decode standardized digital-audio input and present it through a serial output for further processing. Its support for four named standards allows one receiver architecture to accommodate equipment using IEC 60958, S/PDIF, EIAJ CP1201, or AES3. The four-wire microcontroller port provides configuration and metadata access, which is useful for receiver boards that must report lock, source, or channel-status conditions to a system controller. Final qualification should include checks of clocking, jitter behavior, supply requirements, and signal timing.
موصى به
Digital Audio Mixer
A digital mixer can use the CS8415A-CS to recover multiple digital-audio channels through its seven-channel input architecture. Decoded data is delivered through the serial digital-audio output, while status and user information remain accessible through buffered reads over the four-wire control port. This separates transport decoding from mixing and channel-routing functions, allowing a host processor to concentrate on level control, routing, metering, and system behavior. The mixer design must confirm that the selected rate and clock arrangement meet every input-format requirement.
موصى به
Surround-Sound Processor
The CS8415A-CS fits a surround-sound processor that accepts standardized digital-audio streams and needs channel metadata alongside the decoded audio. Seven channels of source selection and support for IEC 60958, S/PDIF, EIAJ CP1201, or AES3 simplify multi-source reception at the transport layer. Its serial output can feed a digital processor, while the microcontroller port enables configuration and status retrieval. Engineers should verify supported channel layouts and data-path details in the manufacturer documentation before defining the processor interface.
موصى به
Audio Interface Converter
An audio interface converter can use the CS8415A-CS as the digital-input stage, accepting one of seven channels encoded according to IEC 60958, S/PDIF, EIAJ CP1201, or AES3. The serial digital output can then be routed toward a converter, processor, or another interface. Block-sized status and user-data buffers simplify host access to information associated with each stream. This application is especially relevant to legacy equipment refreshes where the existing board already implements the four-wire control protocol and 28-pin SOIC footprint.
موصى به
Digital Recording Equipment
Digital recording equipment can use the CS8415A-CS to receive standardized digital-audio streams before passing the decoded data into an ADC pipeline or digital processing chain. The four supported standards provide flexibility across professional and consumer sources, while the seven-channel architecture supports broader source selection. Buffering channel-status and user data makes the transport metadata accessible to a recording controller. For new designs, the obsolete lifecycle status is a significant qualification concern, so supply continuity and backward compatibility should be assessed before committing the architecture.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ CS8415A-CS — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
ملاحظات التصميم
Route the serial digital-audio output and four-wire control interface as compact, continuous paths with short ground returns. Confirm every connection against the manufacturer's pin-description table before routing, particularly because the exact pin names and electrical directions are not reproduced on this page. Keep clocks and data away from switching-node and high-current supply paths to reduce coupling into the recovered audio stream.
Plan the digital input, serial output, and control clock as a coordinated interface rather than treating them as ordinary low-speed logic. Use the manufacturer timing diagrams to set propagation, setup, and hold requirements, and verify the complete board because input filters, pads, and routing can change edge behavior. Validate lock and data integrity with the intended source format and clock arrangement before production release.
Do not assume that another CS8415A suffix is automatically interchangeable with the CS8415A-CS. Compare the exact package, pin arrangement, temperature range, and orderable qualification before substitution. Likewise, a functionally similar receiver with a different pinout or control protocol is not a drop-in replacement and may require an adapter board or redesign of the surrounding digital-audio interface.
Apply the manufacturer's recommended decoupling topology directly at the device pins and preserve the specified supply range and sequencing behavior. Since those electrical limits are not listed here, use the manufacturer datasheet rather than general regulator or logic guidance. Confirm ground continuity and isolate noisy analog or switching sections from the digital-audio receiver to reduce power and substrate coupling.
معلومات الامتثال
The manufacturer product page identifies the CS8415A family as discontinued, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements are included in the product information. Compliance fields remain unknown rather than assumed.