CY8C3246PVI-132 - 50MHz 64KB 8051 MCU | Infineon
MPN: CY8C3246PVI-132 ✓ نشطCY8C3246PVI-132 نظرة عامة
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripheral functions onto one device. The 8051 architecture used by the CY8C3246PVI-132 belongs to the broader hierarchy of embedded processors and 8-bit microcontroller ICs. This device family is intended for applications that require deterministic control, local processing, and programmable I/O rather than the processing power of a 32-bit application processor.
The principal operating parameters are a 50 MHz maximum core frequency, 64 KB of flash, and a 1.71 V to 5.5 V supply range. Its 8-bit processing architecture is suitable for motor and power sequencing, user-interface control, industrial equipment, and embedded peripheral management. The 48-SSOP package provides a smaller board footprint than many leaded packages while supporting standard surface-mount assembly and inspection processes.
The PSoC 3 platform combines an 8051 processor with programmable digital and analog resources, allowing designs to incorporate application-specific control logic without relying exclusively on fixed peripherals. The manufacturer identifies the CY8C3246 family as an 8-bit MCU with 64 kByte of flash and operation up to 50 MHz. Device configuration details, clock requirements, memory organization, and peripheral assignments should be established from the manufacturer documentation for the selected ordering code.
Typical design uses include industrial control panels, sensor-conditioning systems, actuator controllers, instrumentation interfaces, and compact consumer equipment. In each case, the 50 MHz clock provides processing headroom for interrupt-driven control, while the 64 KB flash store accommodates firmware, configuration data, and application logic. Firmware must also account for the device's 8-bit architecture when sizing data structures and time-critical operations.
Power-layout design should keep supply and ground connections short, place required bypass capacitors close to the device, and provide adequate copper around the 48-SSOP footprint. Designers should confirm the exact pin assignments, voltage limits, decoupling requirements, and programming interface from the manufacturer datasheet before releasing a PCB or production firmware image.
This product page consolidates the core PSoC 3 specifications, comparison information, sourcing guidance, and practical design considerations for CY8C3246PVI-132. It is intended to help engineers identify the correct device, compare available family alternatives, and plan a reliable 48-SSOP implementation.
بدائل مباشرة لـ CY8C3246PVI-132 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
CY8C3246PVA-132
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CY8C3246PVI-147
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CY8C3246PVA-122
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CY8C3246PVI-132 الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit PSoC 3 microcontroller |
| Processor Core | 8051, 8-bit |
| أقصى تردد للساعة | 50 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programmable System-on-Chip Family | PSoC 3 |
| العلبة | 48-SSOP |
| Package Type | Surface-mount SSOP |
| عدد الدبابيس | 48 pins |
| Bit Architecture | 8-bit |
دليل تكوين أطراف CY8C3246PVI-132 surface-mount ssop
تكوين الأطراف لـ CY8C3246PVI-132 (حزمة surface-mount ssop). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CY8C3246PVI-132.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CY8C3246PVI-132 مناسب لـ 6 التطبيقs: Industrial Control Panels, Sensor Conditioning and Data Acquisition, Motor and Actuator Sequencing, Test and Measurement Instruments, Communication Equipment Controls, Smart Home and Connected Products.
Industrial Control Panels
The CY8C3246PVI-132 fits compact control-panel designs that coordinate buttons, indicators, sensors, and actuator commands. Its 8-bit 8051 core operates up to 50 MHz, providing useful interrupt-handling capacity for real-time user-interface and supervisory tasks. The 64 KB flash store can hold firmware, event logic, calibration values, and configuration tables without requiring an external program-memory device. In the circuit, the MCU would read panel inputs, update the display or indicators, enforce operating limits, and manage communication with other modules. The 48-SSOP package also reduces footprint compared with larger leaded packages. Before layout release, verify the exact pin map, clock requirements, bypass-capacitor placement, and exposed programming interface from the manufacturer documentation.
موصى به
Sensor Conditioning and Data Acquisition
The CY8C3246PVI-132 is suitable for embedded measurement systems that must acquire sensor information, apply scaling and filtering, and present processed data. Its 50 MHz 8051 core can service timer, serial, and external interrupt events while the 64 KB flash reserves space for calibration tables and application firmware. A typical implementation would configure programmable system-on-chip resources, sample external sensors, perform digital filtering, and transfer results through an available communications peripheral. The 1.71 V to 5.5 V operating range supports integration into appropriately designed embedded rails. Because the component is an 8-bit processor, engineers should size buffers and arithmetic operations for its native data width. Confirm analog-resource limits, ADC characteristics, and pin multiplexing against the exact datasheet before selecting the MCU.
موصى به
Motor and Actuator Sequencing
The CY8C3246PVI-132 can serve as the sequencing controller in small motor, valve, relay, or actuator systems. Its 8-bit 8051 architecture at up to 50 MHz is appropriate for coordinating state machines, timing transitions, monitoring limit inputs, and applying safe interlocks. The 64 KB flash capacity can hold lookup tables, motion sequences, diagnostic logic, and firmware revisions. In a typical design, timers and interrupt handlers coordinate actuator outputs while external sensing feedback determines whether the next state is permitted. The 48-SSOP package helps reduce controller-board size, although pin density requires careful fanout and assembly planning. Use the manufacturer pin and electrical tables to configure outputs correctly, and validate timing, current limits, and protection components independently of the MCU specifications.
موصى به
Test and Measurement Instruments
The CY8C3246PVI-132 fits compact measurement products that need local sequencing, display control, calibration storage, and peripheral coordination. The 50 MHz 8051 core supports responsive command handling, while 64 KB flash can store operating modes, calibration coefficients, test sequences, and diagnostic firmware. A practical circuit would receive commands through a serial interface, configure the PSoC resources, collect measurements from connected front ends, and update the display or store results. The 1.71 V to 5.5 V operating range allows integration across carefully partitioned low-voltage rails. For instruments requiring accurate analog measurements, verify that the selected PSoC family variant provides the required conversion resources and performance. Keep sensitive analog and digital paths separated on the PCB, and use the manufacturer's reference guidance for decoupling and layout.
موصى به
Communication Equipment Controls
The CY8C3246PVI-132 can be used as a supervisory controller in communication equipment where an external communications device handles high-bandwidth traffic while the MCU manages configuration, status, front-panel behavior, and fault recovery. Its 64 KB flash is suitable for protocol-independent state logic, configuration data, and firmware, while the 50 MHz 8051 core provides responsive handling of interrupts and status polling. A typical implementation would initialize the communications peripheral, verify link status, manage local settings, and report faults through indicator or control signals. The 48-SSOP footprint supports compact single-board designs. Confirm that the selected pin configuration exposes the required UART, SPI, or other interface functions and that the operating rail meets the 1.71 V to 5.5 V specification. Use the manufacturer pin table rather than assigning peripheral functions solely from package position.
موصى به
Smart Home and Connected Products
The CY8C3246PVI-132 is appropriate for compact connected products that need local control, peripheral management, and programmable logic around a communications module. The 8-bit processor can operate up to 50 MHz, handle button and sensor inputs, update indicators, and enforce device-level state logic, while 64 KB flash accommodates application firmware and configuration data. In a typical smart-home controller, the MCU would initialize a wireless or wired module, scan user inputs, coordinate actuators, and retain operating state. The 48-SSOP package supports space-constrained boards, but its fine pitch makes assembly and prototype rework more demanding than a larger package. Confirm available communications peripherals, sleep behavior, and wake-up sources in the manufacturer documentation. Power the MCU within the specified 1.71 V to 5.5 V range and validate sleep current in the final system configuration.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ CY8C3246PVI-132 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CY8C3246PVA-132 | CY8C3246PVI-147 | CY8C3246PVA-122 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-SSOP | 48-SSOP - same package format | 48-SSOP - same package format | 48-SSOP - same package format |
| Processor Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum Clock Frequency | 50 MHz | 50 MHz | Up to 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 kByte | 64 KB |
| Product Family | PSoC 3 | PSoC 3 | PSoC 3 | PSoC 3 |
| Ordering Suffix | PVI-132 | PVA-132 | PVI-147 | PVA-122 |
أبرز الفروقات
- Exact PVI-132 ordering configuration (مقابلCY8C3246PVA-132)
- Documented 8 kByte SRAM in the documented family option (مقابلCY8C3246PVI-147)
- Same core performance across the compared family devices (مقابلCY8C3246PVA-122)
ملاحظات التصميم
Build the PCB footprint from the current 48-SSOP manufacturer drawing rather than from a generic SSOP library entry. Place all required bypass capacitors close to their associated supply pins, keep ground-return paths short, and route sensitive signals away from high-current switching nodes. Verify courtyard clearance, pin numbering, paste geometry, and assembly orientation against the released package drawing before fabrication.
Design the supply for the documented 1.71 V to 5.5 V operating range and include the decoupling network specified by the manufacturer. Confirm startup behavior, voltage ramp limits, and brownout requirements during power sequencing. If the PSoC controls relays, motors, or other inductive loads, use separate protection paths so switching transients do not enter the MCU supply or signal traces.
Treat clock, programming, and communication routes as layout-sensitive nets even though the processor is an 8-bit 8051 core. Provide a short ground reference beneath or adjacent to high-speed routes, maintain controlled return paths, and observe spacing rules for external clocks and switching circuitry. Follow the manufacturer's pin-description table when assigning multiplexed PSoC functions because alternate peripheral mappings can change the required routing.
Do not approve a substitute using only the 50 MHz frequency and 48-SSOP package description. Decode the complete ordering suffix and verify operating temperature, qualification, device revision, and production status. A close family alternative may share the footprint but differ in qualification or ordering characteristics. Preserve the original firmware and validation plan whenever the exact device changes, and review the errata applicable to the selected ordering code.
معلومات الامتثال
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code. Confirm compliance with the manufacturer or the current manufacturer documentation before procurement.