EFM32TG232F16-D-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG232F16-D-QFP64 ✓ نشطEFM32TG232F16-D-QFP64 نظرة عامة
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one integrated circuit. Within the semiconductor hierarchy, the EFM32TG232F16-D-QFP64 is an embedded microcontroller and part of the ARM Cortex-M3 processor family. Its role is to execute firmware, acquire sensor data, control actuators, and manage low-power system behavior in applications where energy efficiency and rapid wake-up are important.
The principal specifications include a 32 MHz maximum operating frequency, 16 KB of Flash program memory, 4 KB of SRAM, and 53 digital I/O pins. The device also includes two 16-bit timers and operates from a 1.85 V to 3.8 V supply range. Its 64-TQFP surface-mount package exposes substantially more I/O than smaller microcontroller packages while remaining compatible with established 10 mm by 10 mm board-layout practices.
The Tiny Gecko platform is designed around energy-sensitive operation rather than maximum processing throughput alone. Low-energy modes allow the processor to remain idle without continuously consuming active processing power, while fast wake-up times support duty-cycled measurement and control systems. The combination of a 32 MHz Cortex-M3 core, 16 KB of Flash, and 4 KB of RAM is suitable for compact control firmware, low-rate communications, sensor aggregation, and user-interface support functions.
Typical applications include battery-operated sensors, industrial monitoring nodes, compact energy-management controllers, wearable accessories, connected building equipment, and low-power consumer products. The 53 available digital I/O pins allow the device to supervise multiple discrete signals, while the timer resources support periodic sensing, timing, and pulse-related tasks without requiring a separate timing controller.
PCB implementation should preserve the device's low-power behavior by minimizing leakage from unused GPIO pins and placing decoupling capacitance close to the supply pins. Firmware should also configure unused pins explicitly and use the manufacturer's clock, sleep-mode, and reset guidance. The 16 KB Flash limit makes code size and bootloader configuration important constraints for production designs.
This page combines manufacturer specifications, sourcing information, practical application guidance, and same-package upgrade analysis. It also identifies the distinction between pin-compatible devices and variants whose Flash or RAM capacity changes the software requirements, helping engineers evaluate replacement decisions before modifying a PCB.
بدائل مباشرة لـ EFM32TG232F16-D-QFP64 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع EFM32TG232F16-D-QFP64 (نفس عامل الشكل والبصمة) — يختلف في Flash Memory, Product Type, Digital I/O Pins, Package, RAM.
EFM32TG232F8-D-QFP64
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←EFM32TG232F8-QFP64
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EFM32TG232F16-QFP64
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EFM32TG232F16-D-QFP64 الحدود القصوى والخصائص الكهربائية
| Product Type | ARM Cortex-M3 Microcontroller |
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| RAM | 4 KB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| العلبة | 64-TQFP (10 mm x 10 mm) |
| نوع التركيب | Surface Mount |
| Packaging | Tray |
| Minimum Order Quantity | 800 units |
| Lead Time | 12 weeks |
| حالة دورة الحياة | Active |
| حالة RoHS | ROHS3 Compliant |
دليل تكوين أطراف EFM32TG232F16-D-QFP64 64-tqfp (10 mm x 10 mm)
تكوين الأطراف لـ EFM32TG232F16-D-QFP64 (حزمة 64-tqfp (10 mm x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EFM32TG232F16-D-QFP64.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
EFM32TG232F16-D-QFP64 مناسب لـ 6 التطبيقs: Battery-Powered Sensor Nodes, Industrial Equipment Monitoring, Low-Power Consumer Accessories, Building Automation and HVAC Control, Motor and Pump Control Assistants, Connected Instrumentation and Test Nodes.
Battery-Powered Sensor Nodes
The EFM32TG232F16-D-QFP64 fits compact sensor nodes that periodically wake, acquire measurements, transmit results, and return to a low-energy state. Its 32 MHz ARM Cortex-M3 core provides ample control capability for sensor conditioning and communication logic, while the Tiny Gecko platform supports energy-saving modes and fast wake-up behavior. The 16 KB of Flash stores application firmware and the 4 KB of RAM accommodates sampled data and protocol buffers. A 53-pin GPIO complement allows status, interrupts, and actuator-control signals to remain integrated. The key design trade-off is firmware size: compact algorithms and disciplined driver code preserve the benefit of a single low-power MCU.
موصى به
Industrial Equipment Monitoring
The EFM32TG232F16-D-QFP64 can supervise discrete signals from industrial machinery, production equipment, and remote condition-monitoring modules. Its 53 digital I/O pins reduce the need for multiple multiplexers when monitoring switches, interlocks, contactors, and fault lines, while two 16-bit timers support periodic sampling and timing functions. The 1.85 V to 3.8 V operating range permits integration with low-voltage industrial sensor chains. Designers should configure unused pins explicitly, isolate external field wiring, and validate the complete interface levels. The limited 16 KB Flash and 4 KB RAM favor focused monitoring logic rather than large protocol stacks.
موصى به
Low-Power Consumer Accessories
The EFM32TG232F16-D-QFP64 is appropriate for wearables, personal accessories, and compact user-interface controllers where a full application processor would be unnecessary. Its low-energy platform can remain dormant between user interactions, then wake quickly for button processing, display updates, or short communications bursts. The Cortex-M3 core provides deterministic 32-bit processing for state machines and device protocols, and the 53 I/O pins can serve buttons, indicators, sensors, and haptic-control signals. Designers should budget flash carefully for graphics libraries and update code, because the 16 KB program memory is the principal constraint compared with higher-capacity microcontrollers.
موصى به
Building Automation and HVAC Control
The EFM32TG232F16-D-QFP64 can manage compact building-automation nodes that read environmental inputs and control relays, dampers, or indicators. Its large GPIO complement allows multiple room sensors and discrete control lines to be connected without a separate high-pin-count interface controller. Two 16-bit timers support periodic measurement and actuator timing, while the low-power architecture suits installations that spend substantial time idle. Firmware should use the manufacturer sleep-mode procedure and ensure external pull networks do not create leakage paths. The 1.85 V to 3.8 V range also simplifies integration with low-voltage building-control power systems.
موصى به
Motor and Pump Control Assistants
The EFM32TG232F16-D-QFP64 can serve as a supervisory controller for small motors, pumps, valves, or fan subsystems where a dedicated application processor is unnecessary. Its 32-bit Cortex-M3 core can execute state-machine logic and process current, temperature, or fault inputs, while the 53 GPIO pins support control outputs, interlocks, and status feedback. The two 16-bit timers are useful for periodic monitoring and timing functions. Designers should keep safety shutdown paths deterministic and avoid placing critical protection solely in higher-level software. Available 4 KB of RAM and 16 KB of Flash make compact firmware essential.
موصى به
Connected Instrumentation and Test Nodes
The EFM32TG232F16-D-QFP64 can serve as the control core for compact instrumentation, programmable test fixtures, and data-acquisition endpoints. Its 32 MHz Cortex-M3 core supports deterministic control loops, and the 53 digital I/O pins provide broad access to sensors, relays, and digital test equipment. Two 16-bit timers assist with pulse counting, sampling intervals, and repetitive measurement sequences. The 64-TQFP package offers ample connectivity in a 10 mm by 10 mm footprint. Engineers should reserve flash for instrumentation control and calibration logic, since measurement algorithms, communications stacks, and bootloader code can quickly approach the 16 KB limit.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ EFM32TG232F16-D-QFP64 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | EFM32TG232F8-D-QFP64 | EFM32TG232F8-QFP64 | EFM32TG232F16-QFP64 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) - same | 64-TQFP (10 mm x 10 mm) - same | 64-TQFP (10 mm x 10 mm) - same |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 8 KB | 8 KB | 16 KB |
| RAM | 4 KB | 2 KB | 2 KB | 4 KB |
| Digital I/O Pins | 53 pins | 53 pins | 53 pins | 53 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
أبرز الفروقات
- Twice the Flash capacity of the reduced-memory family variant (مقابلEFM32TG232F8-QFP64)
- Twice the RAM capacity for working buffers and application state (مقابلEFM32TG232F8-D-QFP64)
- Retains the full 53-pin GPIO complement across same-package options (مقابلEFM32TG232F8-QFP64)
ملاحظات التصميم
The device operates from 1.85 V to 3.8 V, so the supply design must remain within that range under transient conditions. Place the required supply and ground decoupling capacitors close to their associated pins, and keep the power route short to minimize inductance. If a switching regulator supplies the rail, enable a suitable low-noise filtering stage when analog measurement accuracy depends on a quiet supply.
Reserve routing and component clearance for the 64-TQFP footprint with 10 mm by 10 mm body dimensions. Confirm the manufacturer's land pattern against the PCB fabrication standard used by the assembler, including pad length, toe extension, and solder-mask details. Avoid placing tall components on the opposite side beneath fine-pitch leads unless the board stackup and assembly process have been reviewed.
Do not select a reduced-memory variant merely because the package and core match. EFM32TG232F8 devices provide 8 KB Flash and 2 KB RAM, versus 16 KB Flash and 4 KB RAM for the target. Check the linker map, bootloader partition, stack and heap allocation, retained-state requirements, and update-image size before approving either EFM32TG232F8 alternative as a drop-in replacement.
Configure every unused GPIO as an input or output state that does not create a static leakage path. Floating inputs can increase current and prevent the MCU from benefiting from its low-energy modes. External pull resistors should be added only where they serve a defined function, and firmware should use the manufacturer-recommended pin state for shutdown and wake behavior.
معلومات الامتثال
The product listing identifies the device as ROHS3 Compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is available for this exact MPN.