EFM32TG825F8-D-BGA48R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
MPN: EFM32TG825F8-D-BGA48R ✓ نشطEFM32TG825F8-D-BGA48R نظرة عامة
An ARM Cortex-M3 microcontroller, or MCU, combines a processor core, memory, peripherals, and I/O in one integrated circuit. Within the semiconductor hierarchy, the EFM32TG825F8-D-BGA48R belongs to the 32-bit microcontroller family and uses the low-power Tiny Gecko platform. Its autonomous peripherals and energy-saving modes are intended to reduce the amount of CPU activity required for routine sensing, communications, and control tasks.
The device operates at up to 32 MHz and includes 8 KB of Flash, 2 KB of RAM, 37 digital I/O pins, two 16-bit timers, LCD support, and AES capability. According to the manufacturer EFM32TG data sheet, the family consumes as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. These characteristics support duty-cycled products in which the controller sleeps between infrequent events.
The Tiny Gecko architecture combines an ARM Cortex-M3 processor with energy-management peripherals and high analog integration. Its wake-up interrupt controller can handle interrupt requests while the CPU is asleep, reducing the need for continuous polling. The 37 available digital I/O pins also provide substantial connection flexibility for sensors, displays, user interfaces, and external interface converters within the constraints of a 4 x 4 mm BGA footprint.
Typical applications include energy-harvesting sensor nodes, compact industrial monitors, wearable accessories, connected home devices, low-power metering equipment, and portable products with small displays. The 8 KB Flash capacity favors control-oriented firmware with limited code storage, while the LCD and AES features support display-driven and security-conscious designs. A higher-memory family member is preferable when firmware, libraries, or update buffers require more space.
Board design should preserve the separation and decoupling of AVDD_x, VDD_DREG, and IOVDD_x as described in the EFM32TG data sheet. Place supporting capacitors close to their assigned supply pins, keep sensitive analog and communication routes away from fast digital switching nodes, and follow the manufacturer hardware-design guidance before committing a new 48-BGA layout.
This page organizes the EFM32TG825F8-D-BGA48R's memory, power, package, and application characteristics into an engineering-focused selection guide. It also distinguishes same-package family alternatives by their verified differences, helping designers identify when a higher-Flash variant is preferable and when the 8 KB configuration is sufficient for the intended firmware workload.
بدائل مباشرة لـ EFM32TG825F8-D-BGA48R — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع EFM32TG825F8-D-BGA48R (نفس عامل الشكل والبصمة) — يختلف في Architecture, Supply Voltage Range.
EFM32TG825F32-D-BGA48
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
EFM32TG225F8-BGA48
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EFM32TG225F32-BGA48
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
EFM32TG825F8-D-BGA48R الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | EFM32 Tiny Gecko |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 8 KB |
| RAM | 2 KB |
| Digital I/O Pins | 37 |
| Timers | 2 x 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Run Mode Current | 150 uA/MHz |
| Stop Mode Current | 0.6 uA |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit RISC |
| العلبة | 48-BGA (4 x 4 mm) |
| نوع التركيب | Surface mount |
| Display Support | LCD |
| Security Feature | AES |
| Wake-up Interrupt Controller | Included |
دليل تكوين أطراف EFM32TG825F8-D-BGA48R 48-bga (4 x 4 mm)
تكوين الأطراف لـ EFM32TG825F8-D-BGA48R (حزمة 48-bga (4 x 4 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EFM32TG825F8-D-BGA48R.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
EFM32TG825F8-D-BGA48R مناسب لـ 6 التطبيقs: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Low-Power Metering Devices, Portable Health and Wearable Accessories, Display-Equipped Connected Devices, Smart Home and IoT Endpoints.
Battery-Powered Sensor Nodes
The EFM32TG825F8-D-BGA48R fits compact battery-powered sensor nodes because its 32 MHz ARM Cortex-M3 core handles acquisition and control work while the Tiny Gecko platform can remain in a low-power state between events. According to the manufacturer EFM32TG data sheet, the family consumes as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. Its wake-up interrupt controller supports event-driven operation, while 37 digital I/O pins leave room for sensors, indicators, and interface devices. The main limitation is Flash: firmware, drivers, and update logic must fit within 8 KB.
موصى به
Industrial Monitoring and Control
For industrial monitoring equipment, the EFM32TG825F8-D-BGA48R provides a compact Cortex-M3 control platform with 37 digital I/O pins and two 16-bit timers for basic sensing, sequencing, and actuator-control functions. Its 1.98 V to 3.8 V operating range permits integration with low-voltage industrial signal chains when their voltage levels are compatible. The 48-BGA, 4 x 4 mm package also saves board area, although its fine pitch requires careful escape routing and inspection. Use the 8 KB Flash configuration for focused control firmware; choose a 32 KB family member when diagnostics, communications stacks, or bootloader features need more code space.
موصى به
Low-Power Metering Devices
The EFM32TG825F8-D-BGA48R is appropriate for utility, energy, or resource metering products that periodically measure inputs and remain idle for most of the operating cycle. The Cortex-M3 processor runs at up to 32 MHz, while the energy-saving platform and wake-up interrupt controller support sleep between measurements. The 37 digital I/O pins can accommodate pulse inputs, status signals, and local controls. A 1.98 V to 3.8 V supply range simplifies integration with compatible low-voltage sensor and communication modules. Designers should budget Flash carefully because 8 KB limits protocol-library and secure-update complexity.
موصى به
Portable Health and Wearable Accessories
The EFM32TG825F8-D-BGA48R can serve as the low-power controller in a compact health accessory, wearable peripheral, or portable diagnostic module. Its 2 KB RAM is suitable for modest buffering, while the 37-I/O configuration supports sensors, buttons, status indicators, and serial interface components. The family's 0.6 uA Stop-mode figure is useful for preserving battery capacity between user interactions. However, the 8 KB Flash capacity favors tightly scoped application code rather than large graphical frameworks or intensive local storage. Medical claims should be validated separately, and the MCU's digital and analog functions must be paired with appropriately qualified front-end circuitry.
موصى به
Display-Equipped Connected Devices
The EFM32TG825F8-D-BGA48R suits small connected products that include a simple LCD and operate on a constrained power budget. The manufacturer identifies LCD support as a device feature, allowing the MCU to supervise a compact display and associated user inputs without requiring a separate display controller. At 32 MHz, the Cortex-M3 core supports responsive control and communication handling, while Stop mode reduces consumption when the interface is idle. The 37 digital I/O pins provide connections for display control, buttons, and external functions. Because Flash is limited to 8 KB, graphical assets should remain outside the MCU and complex UI frameworks should be avoided.
موصى به
Smart Home and IoT Endpoints
The EFM32TG825F8-D-BGA48R is appropriate for compact IoT endpoints that need local sensing, simple control logic, and low standby consumption. Its 32-bit Cortex-M3 platform, 37 digital I/O pins, two 16-bit timers, and LCD capability provide enough resources for sensors, indicators, and basic local interfaces. The 1.98 V to 3.8 V supply range supports integration with compatible low-voltage system rails. For radio-heavy products, radio power and duty cycle may dominate battery life even when the MCU sleeps efficiently. Use a 32 KB variant when application firmware, connectivity abstractions, or over-the-air update staging require additional memory.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ EFM32TG825F8-D-BGA48R — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | EFM32TG825F32-D-BGA48 | EFM32TG225F8-BGA48 | EFM32TG225F32-BGA48 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA | 48-BGA |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Flash Memory | 8 KB | 32 KB | 8 KB | 32 KB |
أبرز الفروقات
- Lower Flash configuration for focused firmware (مقابلEFM32TG825F32-D-BGA48)
- Defined low-power operating characteristics (مقابلEFM32TG225F8-BGA48)
- Substantial I/O availability in a compact package (مقابلEFM32TG225F32-BGA48)
ملاحظات التصميم
Route AVDD_x, VDD_DREG, and IOVDD_x as the EFM32TG data sheet directs, including any recommended PCB-level connection or filtering between the supply domains. Place the associated capacitors close to the device pins and keep sensitive analog supply routing away from digital return currents. This is particularly important in battery-powered designs because Stop-mode current is only 0.6 uA for the family, so board leakage can materially alter the expected standby budget.
Design the PCB around the 48-BGA, 4 x 4 mm footprint and plan all escape routing before fabrication. The small body and fine pitch constrain access to inner rows, making via placement and solder-mask design important for assembly yield. Review the manufacturer package drawing, recommended land pattern, and reflow profile rather than deriving geometry from the body size alone.
Do not select the 8 KB Flash device as though it were the 32 KB version. EFM32TG825F8-D-BGA48R offers 8 KB of Flash and 2 KB of RAM, so larger protocol libraries, update buffers, graphical code, or dual-bank firmware may not fit. Estimate the final linked image and runtime stack requirement before release; select EFM32TG825F32-D-BGA48 when the memory budget does not fit.
Keep clocks, communications, and other fast-switching routes away from sensitive analog inputs and the AVDD_x region. Use a continuous ground reference beneath the device where the package design permits, avoid long return paths through power circuitry, and follow application note AN0002 for practical EFM32 schematic and layout recommendations. Review wake and sleep behavior in the final board because external pull networks can prevent the intended low-current state.
معلومات الامتثال
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the referenced product materials.