ICS650R-01 - 66.67MHz PLL Clock Synthesizer | Renesas
MPN: ICS650R-01 ✗ انتهى عمره الإنتاجيICS650R-01 نظرة عامة
A clock synthesizer is an integrated timing device that converts a lower-frequency reference into one or more higher-frequency signals. Clock synthesizers commonly use a phase-locked loop, or PLL, to lock a voltage-controlled oscillator to an external crystal or clock source. Within the broader semiconductor hierarchy, the ICS650R-01 belongs to the clock and timing IC family, where it provides frequency multiplication and clock-distribution functions for digital systems.
The principal features of the ICS650R-01 include a maximum output frequency of 66.67 MHz, support for either crystal or clock input, CMOS output signaling, and a PLL with bypass. The 14.31818 MHz reference associated with this device is the classic frequency used for NTSC-related timing systems. The PLL architecture allows the output to be derived from a stable crystal source while retaining bypass flexibility for test and clock-source transition scenarios.
The ICS650R-01 uses phase-locked-loop techniques to establish the relationship between its reference input and synthesized output. The bypass function gives a system designer an alternate clock path when direct use of the source clock is preferable. Because the output is CMOS and reaches 66.67 MHz, board-level implementation requires careful attention to trace impedance, return paths, ground integrity, and clock-edge margin. The 20-pin SSOP footprint supports conventional surface-mount assembly and is suitable for compact peripheral-clock circuitry.
Typical applications include legacy video and display timing, computer and peripheral clock generation, communication equipment, industrial control systems, and digital logic requiring a derived clock from a crystal source. The ICS650R-01 is particularly relevant to retrofits and repairs of equipment designed around the 14.31818 MHz reference and 66.67 MHz synthesized output. Its CMOS output can feed compatible counters, divider stages, timing controllers, and other clock-domain logic when voltage and frequency requirements are met.
Design should begin by confirming the required reference frequency, output frequency, output amplitude, load capacitance, supply voltage, and operating-temperature range against the manufacturer datasheet. Place the crystal and associated load network close to the clock input, maintain a continuous ground reference beneath clock circuitry, and avoid routing the sensitive reference node beside switching nodes. Because no complete operating electrical table or timing characteristics are stated on the product listing, those limits must be taken directly from the manufacturer datasheet before production release.
This product page combines the documented clock-source function, package information, replacement guidance, application-oriented engineering context, and a package-matched comparison framework. It also distinguishes electrically similar ordering variants from confirmed alternatives, helping designers identify the correct device without relying solely on a clock frequency or package name.
بدائل مباشرة لـ ICS650R-01 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
ICS650R-01I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
650R-01LF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ICS650R-01 المواصفات
| Device Type | Clock/Frequency Synthesizer IC |
| Maximum Output Frequency | 66.67 MHz |
| Reference Input Frequency | 14.31818 MHz |
| Reference Input Type | Parallel-resonant crystal or clock |
| نوع الخرج | CMOS |
| PLL | Yes, with bypass |
| عدد المخارج | 1 output |
| Architecture | Analog/digital phase-locked loop |
| العلبة | 20-SSOP, 3.90 mm width |
| Package Width | 0.154 inch (3.90 mm) |
| نوع التركيب | Surface mount |
دليل تكوين أطراف ICS650R-01 0.154 inch (3.90 mm)
تكوين الأطراف لـ ICS650R-01 (حزمة 0.154 inch (3.90 mm)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS650R-01.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ICS650R-01 مناسب لـ 6 التطبيقs: Legacy Video Timing Clock Generation, Computer Peripheral Clocking, Industrial Control and Timing, Communication Equipment Clock Source, Digital Counter and Divider Systems, Equipment Repair and Retrofit.
Legacy Video Timing Clock Generation
The ICS650R-01 fits legacy video timing because it accepts a 14.31818 MHz parallel-resonant crystal and derives a clock output up to 66.67 MHz through its analog/digital PLL. This reference relationship is commonly associated with NTSC-era timing architectures, allowing one stable crystal to feed counters, dividers, and timing-control logic without requiring multiple independent oscillators. The CMOS output can directly support compatible digital stages when its voltage, edge rate, and duty cycle match the receiver. PLL bypass is useful during bring-up because it allows a designer to examine the behavior of the source clock before relying on the synthesized path. The design should preserve a continuous ground reference, route the reference node away from switching currents, and validate timing margins across temperature before committing the legacy board to production.
موصى به
Computer Peripheral Clocking
The ICS650R-01 can serve as the central clock synthesizer in equipment requiring a derived CMOS clock for system peripherals. Its 14.31818 MHz crystal reference and PLL-based generation of up to 66.67 MHz provide a compact way to establish multiple logic domains through downstream counters or dividers. This approach is especially useful when a board must retain a stable reference while allowing test-mode access to the unmultiplied clock. Compatibility depends on matching the receiver’s CMOS input thresholds and timing margins, because frequency alone does not guarantee a safe replacement. Layout should minimize loop area around the crystal and clock-output traces, provide a solid ground plane, and avoid routing the clock alongside high-current switching edges that could introduce coupling or jitter.
موصى به
Industrial Control and Timing
The ICS650R-01 is suitable for industrial-control subsystems that require a stable reference-derived clock for counters, state machines, or communication timing. The PLL architecture provides a 66.67 MHz maximum output from a 14.31818 MHz crystal, while bypass capability supports diagnostic and production-test workflows. In an industrial design, engineers should confirm the exact temperature range and output timing from the complete datasheet before using the device outside controlled commercial conditions. A grounded, low-impedance clock topology is important: keep the crystal close to the device, return unused clock and control inputs to known states, and maintain adequate separation from motors, relays, and power-conversion stages. The final design should also include a test point so PLL and bypass operation can be checked without modifying the PCB.
موصى به
Communication Equipment Clock Source
The ICS650R-01 can provide the base clock for communication equipment whose internal timing chain is designed around a 14.31818 MHz reference. Through its PLL, the device generates a clock as high as 66.67 MHz for downstream divider, framing, or interface circuits. PLL bypass gives maintenance personnel a route to test with the direct reference clock, which can simplify fault isolation in assembled equipment. The exact implementation must satisfy the interface’s voltage, duty-cycle, jitter, and rise-time requirements rather than relying on the nominal frequency alone. For signal integrity, use the shortest practical clock route, provide a continuous reference plane, avoid test stubs that create unnecessary loading, and verify edge quality at the receiving device. Environmental suitability requires checking the device’s specified operating-temperature range.
موصى به
Digital Counter and Divider Systems
The ICS650R-01 is useful as the upstream clock for digital counter, divider, and programmable-timing systems requiring a common reference. A 14.31818 MHz crystal produces a PLL-derived output up to 66.67 MHz, while downstream logic can select the required operating frequency through division. Bypass mode can assist with debug by separating source-clock problems from PLL or downstream-divider problems. The design should account for cumulative timing uncertainty, setup and hold requirements, clock duty cycle, and output loading at the highest expected temperature. A short, topology-controlled clock distribution network is preferable to long point-to-point routing. If several loads share the output, use appropriately terminated fan-out or buffer stages rather than loading the ICS650R-01 output excessively. Validate both the PLL-generated and bypass waveforms during system qualification.
موصى به
Equipment Repair and Retrofit
The ICS650R-01 is well suited to repairing legacy systems that use a 14.31818 MHz crystal reference and require a regenerated 66.67 MHz CMOS clock. Installing the device in the original 20-SSOP footprint allows a failed clock synthesizer to be restored without redesigning the surrounding timing architecture. PLL bypass is valuable during diagnosis because it separates reference-chain faults from synthesized-clock faults. Before replacement, compare the original device’s ordering suffix, supply voltage, temperature grade, and timing limits with the datasheet because closely related MPNs can differ in qualification or operating grade. Inspect the crystal, load capacitors, grounding, and nearby high-current circuitry as well, since component substitution alone will not correct a damaged reference network. Confirm the repaired clock amplitude and jitter at the receiving logic before returning the equipment to service.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ICS650R-01 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ICS650R-01I | 650R-01LF |
|---|---|---|---|
| Package | 20-SSOP, 3.90 mm width | 20-SSOP, 3.90 mm width | 20-SSOP, 3.90 mm width |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Device Type | Clock/Frequency Synthesizer IC | Clock/Frequency Synthesizer IC | Clock Synthesizer |
| Maximum Output Frequency | 66.67 MHz | 66.67 MHz | 66.67 MHz |
أبرز الفروقات
- Exact legacy ordering identity (مقابل650R-01LF)
- Documented reference-to-output relationship (مقابلICS650R-01I)
- Integrated PLL bypass for diagnostic flexibility (مقابل650R-01LF)
ملاحظات التصميم
Place the 14.31818 MHz crystal and its load network immediately beside the associated ICS650R-01 pins, with the shortest possible ground return. Keep the reference node away from switching-regulator outputs, relay drivers, and high-current digital edges. A continuous ground plane beneath the oscillator section is preferable to a split or fragmented plane. Verify the final clock waveform at the receiving device because a correct component-level frequency does not guarantee acceptable edge rate or jitter.
Treat the PLL output and bypass output as high-speed CMOS signals even though the maximum synthesized frequency is 66.67 MHz. Use short routing, avoid unnecessary test-point stubs, provide a nearby ground reference, and avoid crossing the clock over split planes. If several loads are connected, use a suitable buffer or controlled fan-out stage instead of allowing excessive capacitive loading. Test both PLL and bypass modes across voltage and temperature because their timing characteristics may differ.
Do not select ICS650R-01, ICS650R-01I, or 650R-01LF solely from the 20-SSOP package and 66.67 MHz headline frequency. Verify the pin assignment, supply voltage, temperature grade, PLL configuration, reference frequency, output amplitude, jitter, and CMOS thresholds in the exact manufacturer documentation. A substitute is suitable only when those operating conditions are equal or remain compatible with the original circuit's timing and environmental requirements.
معلومات الامتثال
No definitive environmental or automotive qualification statements appear in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, and AEC-Q100 status against the exact legacy ordering code and its manufacturer documentation before release.