LC4064V-75T48E - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor
MPN: LC4064V-75T48E ✓ نشطLC4064V-75T48E نظرة عامة
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple logic arrays into one configurable integrated circuit. In the product hierarchy, a CPLD sits between discrete gates and more complex programmable logic devices. Its internally connected macrocells and global routing make it useful when a design needs deterministic timing, moderate logic density, and a relatively simple configuration workflow compared with a field-programmable gate array.
The LC4064V-75T48E provides 64 macrocells, 30 user I/O pins, and a 7.5 ns propagation-delay grade. Its 168 MHz maximum system-frequency rating supports control, interface, and glue-logic functions operating from a 3.3 V, 2.5 V, or 1.8 V supply. In-system programming allows the configuration device to be loaded through its programming interface, helping support prototype updates and production programming without relying on a separate one-time-programmable configuration memory.
The ispMACH 4000 architecture combines the ispLSI 2000 and ispMACH 4A design approaches, as described in the manufacturer family documentation. Its architecture supports predictable signal propagation and is intended for designs that need more integration than discrete programmable logic, while retaining a lower-complexity alternative to an FPGA. The 48-pin TQFP package also exposes a practical mix of user I/O for board-level implementations.
Typical applications include industrial control and automation, embedded peripheral interfacing, display-control logic, communication-interface support, and compact consumer or communications equipment. The 64-macrocell capacity can consolidate address decoding, state-machine logic, counters, latches, and interface control into one device. The 30 user I/O count is especially useful for designs that need moderate board-level connectivity without moving to a larger package.
PCB design should preserve clean power and ground distribution around the TQFP leads, with decoupling placed close to the supply pins. Configuration and I/O timing should be reviewed against the actual clock, load, and voltage conditions. Because the exact pin assignments and electrical limits must be matched to the configuration file, designers should use the pin table and device guidance in the manufacturer family documentation before assigning board signals.
This product record combines the device architecture, package information, engineering selection criteria, and application-oriented design guidance with a focused comparison against same-package family options. It is structured to help engineers identify whether the 7.5 ns device grade, 64 macrocells, 30 I/O pins, and 48-pin TQFP implementation match a specific logic-design requirement.
بدائل مباشرة لـ LC4064V-75T48E — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LC4064V-75T48E (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Product Family, Propagation Delay.
LC4064V-75T48C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LC4064V-75T48I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LC4064V-10T48I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LC4064ZE-7TN48C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4064V-75TN48E
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4064V-75T48E الحدود القصوى والخصائص الكهربائية
| Device Type | SuperFAST complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000V family |
| Macrocell Count | 64 macrocells |
| User I/O Count | 30 I/O pins |
| Propagation Delay | 7.5 ns |
| Maximum System Frequency | 168 MHz |
| Internal Frequency | 111 MHz |
| جهد التغذية | 3.3 V, 2.5 V, or 1.8 V |
| Logic Family | CMOS |
| العلبة | 48-pin TQFP, 1 mm height |
| نوع التركيب | Surface mount |
| Programming | In-system programmable |
| Commercial Junction Temperature | 90 °C maximum |
| Industrial Junction Temperature | 105 °C maximum |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
دليل تكوين أطراف LC4064V-75T48E 48-pin tqfp, 1 mm height
تكوين الأطراف لـ LC4064V-75T48E (حزمة 48-pin tqfp, 1 mm height). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LC4064V-75T48E.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
LC4064V-75T48E مناسب لـ 6 التطبيقs: Industrial Control and Automation, Embedded Peripheral Interface Control, Display and Video Control, Communication Interface Support, Consumer and Communications Equipment, Programmable Test and Measurement Logic.
Industrial Control and Automation
The LC4064V-75T48E suits industrial controller logic that combines sequencing, state-machine implementation, input conditioning, and output control. Its 64 macrocells provide room for multiple independent logic blocks, while the 7.5 ns propagation delay and 168 MHz maximum system frequency support faster control paths than a 10 ns-grade device. The 30 user I/O pins allow the controller to connect sensors, actuators, interlocks, and status indicators without immediately requiring an FPGA. For equipment exposed to electrical noise, use grounded plane construction, short return paths, and local decoupling to preserve signal integrity. Configuration should be validated against the actual industrial temperature, supply, and timing requirements before production release.
موصى به
Embedded Peripheral Interface Control
The LC4064V-75T48E can implement peripheral bridges, command decoders, FIFO control, interrupt logic, and bus-interface glue in a compact 48-pin package. Its 30 user I/O pins are useful for parallel data lines, chip-select signals, clock gating, and protocol status outputs, while 64 macrocells allow several related functions to remain in one programmable device. The 7.5 ns timing grade is valuable where address decoding or control outputs must settle quickly after a clock edge. Place the device so high-speed clock and interface routes avoid switching-current loops, and match unused I/O treatment to the manufacturer's configuration guidance. Confirm that the selected architecture and configuration file support the exact interface standard used by the surrounding controller.
موصى به
Display and Video Control
The LC4064V-75T48E is appropriate for display-control subsystems requiring pixel timing, row and column sequencing, blanking generation, panel command decoding, and front-panel status logic. The 64 macrocells can consolidate timing generation and interface control, while the 30 user I/O pins can support a parallel display bus and discrete control signals. Its 7.5 ns propagation-delay grade can help reduce combinational delay in control paths at up to a 168 MHz maximum system frequency. Layout should keep display-clock traces short, separate from switching supplies and motor-control return currents. Verify panel voltage levels and timing at the actual system operating conditions rather than relying solely on the maximum device frequency. Use the manufacturer pin table to map every display signal to the correct package pin.
موصى به
Communication Interface Support
The LC4064V-75T48E can support protocol conversion, framing control, transmit and receive sequencing, baud-generation support, and status multiplexing in communication equipment. Its 30 user I/O pins permit parallel interfaces and control signals, while 64 macrocells provide enough capacity for a control-oriented implementation rather than only a few gates. The 7.5 ns propagation-delay grade benefits synchronous control logic, although external transceiver and line-driver delays also determine end-to-end timing. Maintain controlled-impedance clock routing, keep programming signals away from sensitive receive paths, and provide a continuous ground reference beneath the device. Validate setup and hold timing for both the fastest and slowest intended operating conditions, including the selected 3.3 V, 2.5 V, or 1.8 V supply mode.
موصى به
Consumer and Communications Equipment
The LC4064V-75T48E is suitable for compact consumer or communications products that need programmable logic for mode control, key scanning, indicator sequencing, peripheral arbitration, or legacy interface adaptation. Its 64 macrocells consolidate several small logic functions that might otherwise occupy multiple standard-logic devices, while the 48-pin TQFP package supports conventional surface-mount assembly. A 7.5 ns delay grade provides timing margin for synchronous control paths. To prevent configuration or I/O activity from disturbing sensitive analog sections, maintain a disciplined ground plane and route clocks away from high-current loads. Final qualification should cover the complete product temperature range, supply tolerances, and any applicable regional compliance requirements rather than assuming the generic family limits apply to every ordering suffix.
موصى به
Programmable Test and Measurement Logic
The LC4064V-75T48E can implement sequencers, pattern generators, trigger logic, timing-state machines, and acquisition-control functions in compact measurement equipment. Its 64 macrocells and 30 user I/O pins allow multiple instrumentation control paths to be integrated without a large FPGA, and the 7.5 ns propagation-delay grade supports timing-critical sequencing. The device should be placed near the controlled interface circuitry to minimize interconnect delay and susceptibility to crosstalk. Use separate, quiet ground paths for sensitive analog measurements and avoid routing high-current switching returns beneath the CPLD. Confirm the maximum I/O slew, load, and timing specifications against the actual probe, connector, and cable environment before using the device in a precision measurement signal chain.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LC4064V-75T48E — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LC4064V-75T48C | LC4064V-75T48I | LC4064V-10T48I | LC4064ZE-7TN48C | LC4064V-75TN48E |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Propagation Delay | 7.5 ns | 7.5 ns | 7.5 ns | 10 ns | 7 ns | 7.5 ns |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Special Ordering Feature | 7.5 ns speed grade | 7.5 ns speed grade | 7.5 ns speed grade | 10 ns speed grade | 7 ns speed grade | 7.5 ns speed grade |
أبرز الفروقات
- Faster timing grade than the 10 ns same-package alternative (مقابلLC4064V-10T48I)
- 168 MHz maximum system frequency for synchronous control (مقابلLC4064V-10T48I)
- Same-package industrial-temperature alternative for harsher environments (مقابلLC4064V-75T48I)
ملاحظات التصميم
Place the supply decoupling capacitors at the closest practical power pins and provide an uninterrupted ground reference beneath the 48-pin TQFP. Keep programming, clock, and high-speed I/O traces away from switching-node and relay-return paths. The exact pin locations and recommended capacitance must come from the manufacturer pin table and layout guidance. Confirm every assignment in the design compiler output because the LC4064V-75T48E uses a fixed package with dedicated configuration and power pins.
Use the 7.5 ns propagation-delay grade for timing analysis, but include external clock, routing, connector, and peripheral delays in the system budget. The 168 MHz maximum system frequency is a device-class limit rather than a blanket guarantee for every I/O path. Review setup and hold requirements across the intended 3.3 V, 2.5 V, or 1.8 V supply conditions and terminate unused inputs according to the device guidance. Avoid relying on maximum frequency without a complete static timing analysis.
Do not treat every 48-pin ispMACH 4000 ordering code as an automatic functional equivalent. Verify density, speed grade, temperature suffix, supply configuration, and user I/O assignments before substitution. The LC4064V-10T48I candidate has a 10 ns delay rather than 7.5 ns, while LC4064ZE-7TN48C belongs to a different family identifier. Run the original design through the programming software with the proposed replacement and compare the generated configuration and pin report before production.
معلومات الامتثال
No definitive device-level RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established for the exact ordering code. AEC-Q100 is not applicable because this is a programmable logic device rather than an automotive-qualified component family.