Lattice Semiconductor

LC4256V-3T176C - 256-Macrocell 3 ns CPLD | Lattice

MPN: LC4256V-3T176C ✓ نشط
3.3 V Vdss 176-pin TQFP Package
الحد الأدنى للطلب: 1 |

LC4256V-3T176C نظرة عامة

Lattice Semiconductor LC4256V-3T176C is a 256-macrocell complex programmable logic device with a 3 ns performance grade, offered in a 176-pin TQFP package. The device belongs to the SuperFAST high-density programmable logic family and supports 3.3 V, 2.5 V, and 1.8 V operating configurations. Its combination of high logic density, fast timing, and a large leaded package makes it suitable for established control, interface, and signal-processing designs that require nonvolatile programmable logic.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic blocks, interconnect resources, and input/output structures in one integrated circuit. Within the semiconductor hierarchy, a CPLD is a programmable logic device alongside FPGAs. Compared with an FPGA, a CPLD generally provides simpler architecture, nonvolatile configuration, and deterministic control characteristics. The LC4256V series is positioned for designs requiring high logic density without the resource allocation complexity of a large FPGA.

Key characteristics include 256 macrocells, a 3 ns speed designation, in-system programmability, and support for three principal supply levels: 3.3 V, 2.5 V, and 1.8 V. The 176-pin TQFP package also provides generous pin count for external memory interfaces, parallel data buses, control signals, and multiple dedicated I/O paths. These characteristics make the device relevant to industrial controllers, communication equipment, instrumentation, and legacy platform logic consolidation.

The LC4256V architecture uses a high-density programmable logic structure intended for complex combinational and sequential logic. Its 3 ns grade is appropriate for timing-sensitive control paths when operated within the voltage and temperature limits specified by Lattice Semiconductor. Because configuration is nonvolatile, the programmed function remains available after power is restored, which simplifies system boot behavior and eliminates the need to load configuration from an external memory each time the equipment starts.

Typical applications include programmable interface controllers, industrial automation equipment, communication line-interface logic, test and measurement systems, and embedded control platforms. In these systems, the CPLD can implement glue logic, protocol conversion, timing and sequencing, bus arbitration, or interface adaptation while keeping the implementation compact. The large 176-pin package is especially useful where several wide buses or numerous independently controlled external signals must be routed.

Designers should treat power-supply sequencing, I/O standard selection, and timing constraints as the principal implementation considerations. Decoupling capacitors must be placed close to the supply pins, while clock and high-speed interface routes require controlled impedance and minimized return-path discontinuity. Before substitution, verify the complete pin description, supported I/O standards, temperature grade, and programming-file compatibility in the Lattice Semiconductor datasheet and design toolchain.

بدائل مباشرة لـ LC4256V-3T176C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

LC4256B-3T176C

✅ بديل مباشر
📦 176-pin TQFP
Retains the 3 ns performance grade and 176-pin package, but B-series device resources, I/O behavior, and configuration details require validation

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4256V-3TN176C

✅ بديل مباشر
📦 176-pin TQFP
Retains the 3 ns grade and 176-pin format; temperature or ordering-code differences must be checked against the original suffix

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4256V-5TN176C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 176-pin TQFP
Uses the same 176-pin family but changes the performance grade from 3 ns to 5 ns, reducing maximum timing speed

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4256V-75TN176C

✅ بديل مباشر
📦 176-pin TQFP
Uses the same 176-pin family but changes the performance grade from 3 ns to 7.5 ns, reducing maximum timing speed

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4256V-75TN176I

✅ بديل مباشر
📦 176-pin TQFP
Uses the same 176-pin family but combines a 7.5 ns grade with an industrial suffix; speed and temperature qualification require validation

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4256V-3T176C الحدود القصوى والخصائص الكهربائية

Device Type Complex Programmable Logic Device (CPLD)
Logic Density 256 macrocells
Performance Grade 3 ns
Architecture In-System Programmable SuperFAST High-Density PDL
Maximum Supply Voltage 3.3 V
Alternate Supply Voltage 2.5 V
Low-Voltage Supply 1.8 V
Package Type 176-pin TQFP
Package Designation 176-LQFP
نوع التركيب Surface mount
Programming Support In-system programmable
Configuration Retention Nonvolatile programmable configuration
حالة RoHS unknown
REACH Status unknown

دليل تكوين أطراف LC4256V-3T176C 176-lqfp

تكوين الأطراف لـ LC4256V-3T176C (حزمة 176-lqfp). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 176-lqfp لـ LC4256V-3T176C

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LC4256V-3T176C.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LC4256V-3T176C مناسب لـ 6 التطبيقs: Industrial Programmable Controller, Communication Interface Adapter, Programmable Logic Consolidation, Test and Measurement Front Panel, Data Acquisition Control Logic, Legacy Platform Interface Bridge.

🏭

Industrial Programmable Controller

The LC4256V-3T176C fits industrial controller logic that coordinates sensors, actuators, interlocks, and communication interfaces. Its 256 macrocells provide capacity for state machines, timing sequences, fault handling, and bus arbitration, while the 3 ns grade supports faster control paths than slower speed grades. The 176-pin TQFP package offers ample external connectivity for discrete inputs, relay outputs, status indicators, and field-bus transceivers. Designers should assign I/O standards by signal group, preserve common return paths, and verify the operating-temperature requirement for the final equipment enclosure.

🌐

Communication Interface Adapter

LC4256V-3T176C can serve as a communication adapter between a host processor and legacy peripheral logic. Typical functions include protocol framing, command decoding, FIFO control, interrupt generation, and bus timing compensation. The 3 ns speed grade helps minimize combinational delay in control loops, and the high pin count permits dedicated data, address, chip-select, and handshake connections. Implementation should separate clock and data routes, control impedance on high-speed lines, and validate every transceiver voltage against the selected CPLD I/O standard.

🔧

Programmable Logic Consolidation

The LC4256V-3T176C is useful for consolidating several discrete logic devices into one nonvolatile programmable component. A typical consolidation combines address decoding, control interlocks, latch functions, counters, and status multiplexing in a single CPLD. Its 256 macrocells provide substantially more logic capacity than small generic array logic, while the 3 ns grade supports timing-sensitive paths. Consolidation is most reliable when the engineer documents each original net, proves no output contention, and reruns static timing analysis using the new device's actual pin and timing assignments.

🔧

Test and Measurement Front Panel

LC4256V-3T176C can implement sequencing and interface logic for test and measurement front panels, fixture controllers, and programmable test adapters. Its logic density supports mode selection, button debouncing, display multiplexing, instrument handshaking, and status sequencing in one device. The large TQFP package provides enough pins to connect multiple instruments, relay drivers, and front-panel signals without a second logic package. A robust design should include debounce logic in hardware or CPLD logic, protect external inputs, and separate analog or high-energy circuits from sensitive digital routing.

📡

Data Acquisition Control Logic

The LC4256V-3T176C can coordinate data-acquisition systems by controlling multiplexers, converters, sample counters, trigger logic, and memory interfaces. The 256-macrocell architecture accommodates parallel control paths and sequencing, while the 3 ns grade helps minimize acquisition-control latency. Its 176-pin package accommodates wide buses and numerous converter control signals. Timing closure should account for converter latency, probe loading, board skew, and clock distribution rather than relying solely on the CPLD timing grade, and analog-adjacent routing should be kept physically separate from high-speed digital paths.

🖥️

Legacy Platform Interface Bridge

LC4256V-3T176C is suitable for maintaining or extending legacy platforms that still use parallel buses, processor glue logic, and custom peripheral interfaces. It can translate between bus widths, generate timing-qualified control strobes, arbitrate shared resources, and implement configuration storage logic. The nonvolatile programmable architecture simplifies field operation because the logic configuration is retained in the device. Migration should begin with a complete I/O map, explicit reset and power-up states, and validation of every pin against the manufacturer pin description before the original device is removed from the schematic.

What are the key specifications of LC4256V-3T176C that engineers should know?
The LC4256V-3T176C is a 256-macrocell CPLD with a 3 ns performance grade in a 176-pin TQFP package. According to the Lattice Semiconductor LC4256V datasheet, the family supports 3.3 V, 2.5 V, and 1.8 V supply configurations and provides in-system programmable SuperFAST high-density PLD architecture. Its principal engineering roles are dense control logic, interface adaptation, timing, and signal processing where nonvolatile configuration and a large leaded package are useful.
Where can I download the LC4256V datasheet PDF?
The LC4256V datasheet PDF is available through the Lattice Semiconductor LC4256V datasheet listing at AllDataSheet and through the LC4256V-3T176C datasheet page on Octopart. The manufacturer document describes the 256-macrocell SuperFAST high-density PDL architecture, supported supply configurations, package options, and programming characteristics. Use the Lattice Semiconductor document as the controlling reference for pin descriptions, timing, electrical limits, and programming requirements.
Where can I find the LC4256V-3T176C pinout?
The authoritative LC4256V-3T176C pinout is found in the pin description and package diagrams within the Lattice Semiconductor LC4256V datasheet. The device uses a 176-pin TQFP package, so signal assignment must be checked against that exact package rather than against another member of the LC4256V family. Pay particular attention to supply pins, configuration pins, clock inputs, and user I/O because incorrect assignment can prevent programming or create conflicts on externally connected buses.
Is LC4256V-3T176C a CPLD or an FPGA?
The LC4256V-3T176C is a complex programmable logic device, not a conventional FPGA. It provides 256 macrocells with in-system programmable, nonvolatile logic in a 176-pin TQFP package. Lattice Semiconductor describes the LC4256V family as a SuperFAST high-density PDL. It is appropriate when a design benefits from deterministic programmable logic and simple configuration handling but does not require the extensive resources of a larger FPGA.
LC4256V-3T176C vs LC4256B-3T176C - which is better for an industrial control design?
LC4256B-3T176C is the closest same-speed, same-package alternative for an existing LC4256V-3T176C design. Both are identified as 3 ns, 176-pin Lattice CPLD options, but the B-series may differ in device resources, electrical characteristics, and programming support. For an industrial design, choose the B-series only after checking its datasheet, pin description, macrocell allocation, supported I/O standards, and tool compatibility against the complete system requirements.
What is the difference between LC4256V-3T176C and LC4256V-75TN176C?
The principal documented difference is the performance grade: LC4256V-3T176C is a 3 ns device, while LC4256V-75TN176C carries a 7.5 ns grade. Both belong to the LC4256V family and use the 176-pin package family. The slower alternative is appropriate when maximum timing margin matters more than edge rate; otherwise, its additional propagation delay can prevent the timing closure achieved by the 3 ns grade.
When should I choose LC4256V-3T176C over LC4256B-3T176C?
Choose LC4256V-3T176C when an established design specifically targets the LC4256V device architecture, existing programming files are validated for it, or its verified timing and resource characteristics provide a known advantage. LC4256B-3T176C is a strong candidate for a new 3 ns, 176-pin implementation after confirming pin, voltage, I/O, and software compatibility. A substitution should never be based on package and speed designation alone.
What can replace LC4256V-3T176C?
LC4256B-3T176C is the leading same-package replacement candidate because it retains the 3 ns performance grade and 176-pin package format. Other LC4256V speed grades can provide functional alternatives when slower timing is acceptable, but they may not preserve the original system timing budget. Confirm that the replacement supports the same supply voltage, I/O standards, configuration method, pin functions, and Lattice programming workflow before approving it.
Is LC4256V-3T176C suitable for a 3.3 V industrial system?
The LC4256V-3T176C is suitable in principle for a 3.3 V system because the Lattice Semiconductor LC4256V family supports a 3.3 V supply configuration. Final suitability depends on the complete operating temperature range, I/O voltage selection, AC timing, output-current limits, and signal-integrity requirements. Confirm these details in the manufacturer datasheet and ensure every connected interface uses an electrically compatible I/O standard.
Is LC4256V-3T176C in stock and how long is the lead time?
Current stock and lead time should be requested through the Request a Quote form on this page so the order can be matched to the exact package and quantity. The product listing identifies LC4256V-3T176C as an orderable catalog item, but inventory and production timing can change. Provide the required quantity, target shipment date, and any traceability requirements when requesting the quotation.
What is the price of LC4256V-3T176C?
The current LC4256V-3T176C price depends on order quantity, sourcing conditions, and the requested delivery schedule. Use the Request a Quote form on this page to request current pricing for the exact 176-pin device and required quantity. The form provides a direct commercial response without embedding a potentially stale price into the technical product description.
Where can I buy LC4256V-3T176C online?
Use the Request a Quote form on this page to purchase LC4256V-3T176C with the exact MPN, package, quantity, and traceability requirements stated in the request. This approach avoids ambiguity between the LC4256V and LC4256B families or between commercial and industrial suffix options. Include the target date and shipping destination so availability and delivery can be confirmed for the intended production build.
What is the best Lattice Semiconductor equivalent for LC4256V-3T176C?
LC4256B-3T176C is the best Lattice Semiconductor candidate to evaluate as a drop-in alternative because it shares the 3 ns performance designation and 176-pin package. It should not be treated as automatically interchangeable: macrocell resources, pin functions, supported I/O standards, electrical limits, and configuration software must match. Same-brand alternatives shown here are speed- or series-related options, not a guarantee of plug-compatible programming files.
Can LC4256V-75TN176C replace LC4256V-3T176C?
LC4256V-75TN176C can replace LC4256V-3T176C only if the slower 7.5 ns timing grade still satisfies every setup-and-hold, clock-period, and inter-signal constraint. Although both use the 176-pin package family, timing differences can alter external interface margins and internal frequency limits. Validate the replacement in the target timing constraints and confirm electrical, pinout, and programming compatibility before production use.
How should LC4256V-3T176C be used for programmable interface logic?
LC4256V-3T176C can implement interface control, protocol conversion, arbitration, and sequencing around a host processor or custom controller. Its 256 macrocells provide logic capacity, while the 3 ns grade helps preserve timing margin in control and data paths. Keep clock routing short, assign I/O standards to match each external signal, and reserve timing margin for board-level skew and loading rather than relying only on the nominal device grade.

بيانات مرجعية هندسية لـ LC4256V-3T176C — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LC4256V-3T176C when an established design requires the original LC4256V architecture, 3 ns performance grade, 256-macrocell density, and 176-pin TQFP footprint. LC4256B-3T176C is the most practical alternative to evaluate for a new or redesigned implementation because it preserves the 3 ns grade and package, but verify resources, pin functions, I/O standards, and programming compatibility. LC4256V-3TN176C is the closest ordering-code alternative for footprint reuse, subject to suffix and temperature checks. LC4256V-5TN176C or LC4256V-75TN176C should be selected only when slower timing still satisfies all clock-period, setup, hold, and bus-margin requirements. A drop-in decision requires complete datasheet and timing validation rather than package matching alone.

المقارنة مع البدائل

المعامل هذا المنتج LC4256B-3T176C LC4256V-3TN176C LC4256V-5TN176C LC4256V-75TN176C LC4256V-75TN176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 176-pin TQFP 176-pin TQFP - same package 176-pin TQFP - same package 176-pin TQFP - same package 176-pin TQFP - same package 176-pin TQFP - same package
Performance Grade 3 ns 3 ns 3 ns 5 ns 7.5 ns 7.5 ns
Device Type CPLD CPLD CPLD CPLD CPLD CPLD

أبرز الفروقات

  • Faster performance grade than slower LC4256V alternatives (مقابلLC4256V-75TN176C)
  • Closest same-speed option in a later device series (مقابلLC4256B-3T176C)
  • Same package and speed designation for direct qualification (مقابلLC4256V-3TN176C)
  • Higher-speed option for timing-sensitive control paths (مقابلLC4256V-5TN176C)

ملاحظات التصميم

Place the required supply and bypass capacitors close to the corresponding LC4256V-3T176C power pins, with short ground returns and no plane splits beneath the device. The 176-pin TQFP footprint has dense pitch, so use a fabrication-compatible land pattern and inspect solder bridges after assembly. Preserve a continuous ground reference beneath and between signal rows to maintain predictable return paths and reduce simultaneous-switching noise.

Assign external I/O standards by voltage and signaling direction before finalizing the PCB. Keep clocks away from high-current switching nodes, provide a continuous clock reference plane, and avoid stubs on high-speed routes. For source-synchronous or parallel buses, match trace lengths where the interface specification requires it and include board-level timing margin for skew, jitter, connector delay, and input capacitance.

Do not assume that a shared package and speed grade prove interchangeability. Compare the LC4256V-3T176C pin description, macrocell allocation, supported I/O standards, supply limits, temperature grade, configuration method, and programming software against the proposed replacement. Pay particular attention to output-enable behavior, configuration pins, power-up states, and any inactive or reserved pins before releasing a board revision.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The LC4256V family datasheet describes 3.3 V, 2.5 V, and 1.8 V programmable logic devices, but device-specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or authorized documentation.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

lc4256v datasheet LC4256V-3T176C datasheet LC4256V-3T176C pinout LC4256V-3T176C datasheet pdf LC4256V-3T176C equivalent LC4256V-3T176C replacement LC4256V-3T176C cross reference LC4256V-3T176C footprint LC4256V-3T176C price LC4256V-3T176C stock Lattice Semiconductor LC4256V-3T176C LC4256V-3T176C vs LC4256B-3T176C 256 macrocell 3ns CPLD 176 pin TQFP CPLD

المكونات والمصطلحات ذات الصلة

Lattice Semiconductor LC4256V-3T176C LC4256B-3T176C LC4256V-3TN176C LC4256V-5TN176C LC4256V-75TN176C LC4256V-75TN176I Complex Programmable Logic Device CPLD Programmable Logic Device FPGA SuperFAST high-density PDL 256 macrocells 3 ns performance grade 176-pin TQFP surface mount In-system programming nonvolatile configuration 3.3 V 2.5 V 1.8 V industrial control communication interface data acquisition logic consolidation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر