LC4384B-5T176I - 5ns 176-TQFP In-System CPLD | Lattice
MPN: LC4384B-5T176I ✗ انتهى عمره الإنتاجيLC4384B-5T176I نظرة عامة
A CPLD is a programmable-logic device that combines nonvolatile configuration storage with interconnected programmable logic arrays. Within the broader semiconductor hierarchy, the LC4384B belongs to the complex-programmable-logic-device category, alongside FPGAs, but it is especially useful when a design requires deterministic timing, relatively simple integration, and reprogrammability through the ISP interface. The ispMACH 4000B architecture provides a large macrocell count for consolidating control logic, interface logic, and fixed-format datapaths without using a large FPGA.
The most important device characteristics are the 5 ns maximum propagation delay, 384 macrocells, 128 user I/O pins, and support for 1.8 V, 2.5 V, and 3.3 V I/O levels. In-system programming allows the configuration memory to be updated directly in the assembled circuit, which simplifies manufacturing, field upgrades, and prototype correction. The 176-lead surface-mount package also supports high I/O availability for designs requiring numerous external connections.
The LC4384B-5T176I belongs to the speed-grade -5 portion of the LC4384B family, prioritizing faster propagation timing than slower -10 grade devices. Its internal supply range of 2.3 V to 2.7 V is distinct from the supported I/O voltage range, so power and signal-level planning must be performed separately. The manufacturer datasheet should be used to map each package lead to power, ground, configuration, clock, and user-I/O functions before PCB routing.
Typical uses include industrial control systems, communications interfaces, test equipment, embedded control, and general-purpose glue logic. A design with many parallel inputs, multiple clocked state machines, or protocol-control functions benefits from the 128-I/O device. The -5 speed grade is appropriate when timing closure must be achieved in logic that is more complex than simple discrete gate replacement.
PCB implementation should preserve the recommended power and ground distribution, especially because the 176-lead package contains numerous high-frequency signal and supply connections. Use the manufacturer pinout and reference-design guidance when assigning the ISP interface, decoupling, clock inputs, and I/O standards. Confirm the programmed voltage configuration and external interface levels before releasing a production layout.
This product page consolidates the confirmed device characteristics, package information, family alternatives, comparison parameters, and practical selection guidance needed to evaluate the LC4384B-5T176I. It also distinguishes the faster -5 grade from slower LC4384B timing grades and identifies the details engineers should confirm in the manufacturer datasheet before layout or replacement decisions.
بدائل مباشرة لـ LC4384B-5T176I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LC4384B-5T176I (نفس عامل الشكل والبصمة) — يختلف في Architecture, Configuration Memory, Device Type, Package Type.
LC4384B-5TN176I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4384B-10T176I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4384B-6T176I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
LC4384B-7T176I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
LC4384B-10TN176I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
LC4384B-5T176I الحدود القصوى والخصائص الكهربائية
| Device Type | In-System Programmable SuperFAST High-Density PLD |
| Architecture | ispMACH 4000B CPLD |
| Macrocells | 384 macrocells |
| Maximum Propagation Delay | 5 ns |
| User I/O Count | 128 I/O pins |
| Internal Supply Voltage | 2.3 V to 2.7 V |
| Supported I/O Voltage | 1.8 V, 2.5 V, and 3.3 V |
| العلبة | 176-lead TQFP |
| Package Type | Surface Mount |
| Terminal Count | 176 terminals |
| درجة حرارة الوصلة التشغيلية | -40 °C to +105 °C |
| Programming Interface | In-System Programmable |
| Configuration Memory | Nonvolatile programmable configuration |
دليل تكوين أطراف LC4384B-5T176I surface mount
تكوين الأطراف لـ LC4384B-5T176I (حزمة surface mount). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LC4384B-5T176I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
LC4384B-5T176I مناسب لـ 6 التطبيقs: Industrial Control Logic, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, Programmable Interface Backplanes, Data Acquisition Control.
Industrial Control Logic
The LC4384B-5T176I suits industrial controllers that combine multiple state machines, interlocks, counters, and discrete I/O functions in one programmable device. Its 384 macrocells provide substantial logic capacity, while 128 user I/O pins reduce the need for external interface devices. The 5 ns maximum propagation delay is valuable when control paths must respond within a defined machine cycle. In-system programming also permits configuration updates during production or maintenance without replacing the device. The -40 °C to +105 °C junction-temperature range supports industrial environments, although the complete enclosure, input levels, isolation requirements, and timing budget still determine suitability.
موصى به
Communications Interface Consolidation
The LC4384B-5T176I can consolidate communications-control logic, protocol state machines, framing logic, and status registers in a single CPLD. Its 128 I/O pins are especially useful when the interface requires several byte-width buses alongside clock, chip-select, and control signals. The 5 ns speed grade provides more timing margin than the 10 ns family option for synchronous logic operating near device limits. Configuration is retained in nonvolatile memory and can be programmed in-system, which supports prototype refinement and controlled firmware-linked board updates. Signal-level compatibility must be confirmed for each 1.8 V, 2.5 V, or 3.3 V interface, while the 2.3 V to 2.7 V core supply must be regulated independently.
موصى به
Test and Measurement Equipment
The LC4384B-5T176I is useful in test and measurement equipment for sequencing control, trigger routing, status capture, and instrument-bus interface logic. A large macrocell count allows several fixed-format control blocks to be consolidated, while 128 I/O pins support parallel data paths without requiring a very large FPGA. The 5 ns propagation-delay grade can assist with synchronous capture and trigger logic where predictable combinational delays are important. In-system programming supports board-level configuration and engineering changes. For precision analog or measurement paths, the CPLD should manage digital control only; low-noise power, reference isolation, analog signal integrity, and high-speed analog behavior require separate design treatment.
موصى به
Embedded System Glue Logic
The LC4384B-5T176I can implement board-level glue logic around a processor, microcontroller, or custom ASIC, including bus arbitration, interrupt control, watchdog handling, peripheral selection, and state-machine coordination. With 384 macrocells and 128 I/O pins, it bridges interfaces whose width would otherwise consume many discrete components. Its 5 ns speed rating provides additional timing margin when coordinating control signals with a moderately fast system clock. In-system programming allows the interface configuration to be revised independently of the main processor firmware. The design should reserve suitable configuration pins, provide clean clock distribution, and validate all mixed-voltage interfaces against the electrical tables in the manufacturer datasheet.
موصى به
Programmable Interface Backplanes
The LC4384B-5T176I is appropriate for programmable backplane and system-interconnect logic that requires many parallel I/O points and deterministic control behavior. Its 176-lead TQFP package and 128 user I/O pins support wide data and control buses, while 384 macrocells can implement arbitration, routing, translation, and status functions. The 5 ns grade offers better timing margin than the 10 ns version for short synchronous paths. Nonvolatile in-system configuration also permits board identification, routing updates, and configuration reuse across production variants. Signal-integrity work remains essential because high fan-out or long board traces can create timing and reflection problems that cannot be corrected by the nominal CPLD propagation-delay rating alone.
موصى به
Data Acquisition Control
The LC4384B-5T176I can implement digital sequencing and acquisition-control logic around sensors, converters, and memory devices. Its 128 I/O pins can accommodate control signals and parallel data paths, while the 5 ns propagation delay supports deterministic transfer sequencing and register-based control. The large macrocell count is useful for combining multiple acquisition channels, status flags, trigger logic, and buffer-management functions. In-system programming allows acquisition protocols to be changed without redesigning the PCB, which is valuable for configurable test fixtures. Designers should use the manufacturer timing tables to establish clock and data-path limits, and should keep sensitive analog and high-speed memory signals physically separated from programmable output paths where possible.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LC4384B-5T176I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LC4384B-5TN176I | LC4384B-10T176I | LC4384B-6T176I | LC4384B-7T176I | LC4384B-10TN176I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 | TQFP-176 | TQFP-176 | TQFP-176 | TQFP-176 | TQFP-176 |
| Device Architecture | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD | ispMACH 4000B CPLD |
| Macrocells | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells |
| User I/O Pins | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins |
| Maximum Propagation Delay | 5 ns | 5 ns | 10 ns | 6 ns | 7 ns | 10 ns |
| Internal Supply Voltage | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V | 2.3 V to 2.7 V |
| Supported I/O Voltage | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V |
| Programming Interface | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
أبرز الفروقات
- Faster propagation-delay grade (مقابلLC4384B-10T176I)
- Same-package 5 ns family option (مقابلLC4384B-5TN176I)
- Balanced timing alternative (مقابلLC4384B-7T176I)
ملاحظات التصميم
Separate the 2.3 V to 2.7 V internal core supply from the 1.8 V, 2.5 V, and 3.3 V I/O domains when planning the power tree. Decouple each supply group near its package connections using the capacitance and placement specified by the manufacturer datasheet. Confirm the configuration required for every bank and ensure that externally connected interfaces do not exceed the selected I/O voltage. This separation prevents signal-level compatibility from being confused with the core operating voltage.
Use the 176-lead manufacturer pinout to identify configuration pins, clock inputs, dedicated grounds, and user I/O before routing. Keep the ISP connection accessible, preserve recommended power and ground continuity, and route high-fan-out clock signals with short, controlled-impedance paths. Because the package contains many leads, avoid routing sensitive external signals between the device and its decoupling network, and review escape routing against the package drawing rather than relying on a generic TQFP footprint drawing.
Do not substitute a slower LC4384B speed grade without rerunning static timing analysis. Moving from the 5 ns grade to the 10 ns grade doubles maximum propagation delay, while the 6 ns and 7 ns grades also reduce available timing margin. Also confirm the meaning of the N ordering-code suffix, temperature marking, configuration method, and exact lead assignments before accepting any same-family alternative. Pin compatibility alone does not establish functional interchangeability.
Evaluate each interface for setup time, hold time, clock skew, output loading, and board-trace behavior rather than treating the 5 ns propagation-delay figure as a complete timing guarantee. Account for external pull-ups or pull-downs, connector delay, and the programmed I/O standard. In designs using several parallel buses, maintain practical trace-length matching where required and keep switching outputs away from sensitive analog or low-frequency reference lines to reduce crosstalk.
معلومات الامتثال
The confirmed industrial-temperature designation does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or dated product documentation.