LPC1547JBD48QL - 72MHz ARM Cortex-M3 MCU 64KB Flash | NXP
MPN: LPC1547JBD48QL ✓ نشطLPC1547JBD48QL نظرة عامة
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program and data memory, peripherals, and I/O on one IC. The Cortex-M3 is an ARM v7-M architecture core designed for deterministic real-time control with low power consumption. The LPC1500 series specifically targets high-accuracy sensored and sensorless motor control, sitting within NXP's LPC family of Cortex-M microcontrollers for industrial and embedded automation.
Key features include two 12-bit 12-channel 2 Msps ADCs for current/voltage sensing, an SCTimer/PWM subsystem with up to 24 channels for motor commutation, USB FS host/device, two CAN 2.0B interfaces, three SPI, two I2C, and four USART peripherals. The device operates from 2.4 V to 3.6 V across the -40C to +105C temperature range, with hardware AES encryption and a unique device ID for security.
The LPC1547JBD48QL uses a 3-stage pipeline Cortex-M3 core with NVIC supporting 32 interrupts, single-cycle 32x32 multiply and hardware divide. The integrated ROM bootloader supports USB and UART ISP, while the on-chip flash includes 256-byte erase sectors for EEPROM emulation. The configurable SCTimer/PWM can generate complex waveforms with linked state-machine capture and match events without CPU intervention.
Typical applications include BLDC/PMSM servo drives, industrial field-oriented motor control (FOC), robotic actuator controllers, sensorless fan/pump drives, and digital power conversion stages requiring precise PWM timing. The dual high-speed ADCs simultaneously sample phase currents for FOC loop closure.
When designing with this MCU, dedicate 4 KB of the 12 KB SRAM to the Ethernet/USB buffer pool, use the internal 1 MHz IRC for USB start-up, and place 100 nF decoupling caps within 5 mm of each VDD pin pair to maintain ADC SNR during PWM switching transitions.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
بدائل مباشرة لـ LPC1547JBD48QL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LPC1547JBD48QL (نفس عامل الشكل والبصمة) — يختلف في ADC, Package, Operating Temperature, Program Memory (Flash), Core Architecture.
LPC1548JBD48QL
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LPC1547JBD48E
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LPC1519JBD64E
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LPC1517JBD64E
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LPC11C14FBD48/301
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LPC1547JBD48QL الحدود القصوى والخصائص الكهربائية
| Core Architecture | ARM Cortex-M3 (32-bit) |
| أقصى تردد للساعة | 72 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| SRAM | 12 KB |
| Operating Voltage | 2.4 V to 3.6 V |
| ADC | 2 x 12-bit, 12-channel, 2 Msps |
| PWM Channels (SCTimer/PWM) | Up to 24 channels |
| USB | USB 2.0 Full-Speed Host/Device |
| CAN | 2 x CAN 2.0B |
| SPI | 3 x SPI |
| I2C | 2 x I2C |
| USART | 4 x USART |
| درجة حرارة التشغيل | -40C to +105C |
| العلبة | 48-LQFP (7x7 mm) |
| نوع التركيب | Surface Mount |
| حالة RoHS | Compliant |
تكوين أطراف LPC1547JBD48QL
| دبوس 1 | P0_0/ADC0_0/CAN_RD — GPIO / ADC0 channel 0 / CAN receive |
| دبوس 2 | P0_1/ADC0_1/CAN_TD — GPIO / ADC0 channel 1 / CAN transmit |
| دبوس 3 | P0_2/ADC0_2/SCT0_OUT0 — GPIO / ADC0 channel 2 / SCTimer output 0 |
| دبوس 4 | P0_3/ADC0_3/SCT0_OUT1 — GPIO / ADC0 channel 3 / SCTimer output 1 |
| دبوس 5 | VDD — Core supply voltage 2.4-3.6 V |
| دبوس 6 | VSS — Ground |
| دبوس 7 | P0_4/ADC0_4/SCT0_OUT2 — GPIO / ADC0 channel 4 / SCTimer output 2 |
| دبوس 8 | P0_5/ADC0_5/SCT0_OUT3 — GPIO / ADC0 channel 5 / SCTimer output 3 |
| دبوس 9 | P0_6/ADC0_6/SCT0_OUT4 — GPIO / ADC0 channel 6 / SCTimer output 4 |
| دبوس 10 | P0_7/ADC0_7/SCT0_OUT5 — GPIO / ADC0 channel 7 / SCTimer output 5 |
| دبوس 11 | P1_0/ADC1_0 — GPIO / ADC1 channel 0 |
| دبوس 12 | P1_1/ADC1_1 — GPIO / ADC1 channel 1 |
| دبوس 13 | P1_2/ADC1_2 — GPIO / ADC1 channel 2 |
| دبوس 14 | P1_3/ADC1_3/USB_VBUS — GPIO / ADC1 channel 3 / USB VBUS detect |
| دبوس 15 | P1_4/ADC1_4/USB_DP — GPIO / ADC1 channel 4 / USB D+ |
| دبوس 16 | P1_5/ADC1_5/USB_DM — GPIO / ADC1 channel 5 / USB D- |
| دبوس 17 | P1_6/ADC1_6 — GPIO / ADC1 channel 6 |
| دبوس 18 | P1_7/ADC1_7 — GPIO / ADC1 channel 7 |
| دبوس 19 | P2_0/UART0_TXD — GPIO / USART0 transmit |
| دبوس 20 | P2_1/UART0_RXD — GPIO / USART0 receive |
| دبوس 21 | P2_2/SPI0_SCK — GPIO / SPI0 clock |
| دبوس 22 | P2_3/SPI0_MOSI — GPIO / SPI0 master-out slave-in |
| دبوس 23 | P2_4/SPI0_MISO — GPIO / SPI0 master-in slave-out |
| دبوس 24 | P2_5/SPI0_SSEL — GPIO / SPI0 slave select |
| دبوس 25 | P2_6/I2C0_SCL — GPIO / I2C0 clock |
| دبوس 26 | P2_7/I2C0_SDA — GPIO / I2C0 data |
| دبوس 27 | P3_0/UART1_TXD — GPIO / USART1 transmit |
| دبوس 28 | P3_1/UART1_RXD — GPIO / USART1 receive |
| دبوس 29 | P3_2/SPI1_SCK — GPIO / SPI1 clock |
| دبوس 30 | P3_3/SPI1_MOSI — GPIO / SPI1 MOSI |
| دبوس 31 | P3_4/SPI1_MISO — GPIO / SPI1 MISO |
| دبوس 32 | P3_5/SPI1_SSEL — GPIO / SPI1 slave select |
| دبوس 33 | P3_6/I2C1_SCL — GPIO / I2C1 clock |
| دبوس 34 | P3_7/I2C1_SDA — GPIO / I2C1 data |
| دبوس 35 | P4_0/UART2_TXD/CAN1_RD — GPIO / USART2 TX / CAN1 RX |
| دبوس 36 | P4_1/UART2_RXD/CAN1_TD — GPIO / USART2 RX / CAN1 TX |
| دبوس 37 | P4_2/UART3_TXD — GPIO / USART3 transmit |
| دبوس 38 | P4_3/UART3_RXD — GPIO / USART3 receive |
| دبوس 39 | P4_4/SPI2_SCK — GPIO / SPI2 clock |
| دبوس 40 | P4_5/SPI2_MOSI — GPIO / SPI2 MOSI |
| دبوس 41 | P4_6/SPI2_MISO — GPIO / SPI2 MISO |
| دبوس 42 | P4_7/SPI2_SSEL — GPIO / SPI2 slave select |
| دبوس 43 | RESET — External reset input, active low |
| دبوس 44 | XTAL1 — Crystal oscillator input |
| دبوس 45 | XTAL2 — Crystal oscillator output |
| دبوس 46 | VDD — Core supply voltage 2.4-3.6 V |
| دبوس 47 | VSS — Ground |
| دبوس 48 | VREF — ADC voltage reference |
التطبيقات النموذجية
LPC1547JBD48QL مناسب لـ 6 التطبيقs: BLDC/PMSM Motor Field-Oriented Control (FOC), Sensorless FOC Fan and Pump Drives, Industrial Servo Drives and Robotics, Digital Power Conversion (PFC, LLC, Phase-Shifted Full-Bridge), USB-Connected Motor Controller HMI Panels, Battery-Powered Cordless Power Tools.
BLDC/PMSM Motor Field-Oriented Control (FOC)
The LPC1547JBD48QL is purpose-built for BLDC and PMSM motor field-oriented control. Its dual 12-bit 2 Msps ADCs enable simultaneous sampling of two phase currents at the PWM center point, eliminating the need for external sample-hold circuitry and reducing BOM cost. The SCTimer/PWM subsystem generates up to 24 PWM channels with linked state-machine capture and match events, allowing hardware-driven commutation without CPU intervention at typical 10-20 kHz PWM rates. The 72 MHz Cortex-M3 executes the FOC algorithm (Clarke/Park transforms, PI loops, SVPWM) within a 50 microsecond cycle window, leaving bandwidth for CAN communication and protective functions. The integrated CAN 2.0B interface supports CiA 402 servo drive profiles for industrial networking.
موصى به
Sensorless FOC Fan and Pump Drives
For sensorless BLDC fan and pump applications, the LPC1547JBD48QL's BEMF (back-EMF) zero-crossing detection benefits from its dual high-speed ADCs sampling the floating phase voltage through resistor dividers. The SCTimer/PWM can be configured to trigger ADC conversions at precise PWM edges and capture BEMF events with hardware timing, freeing the CPU for speed-loop PI control. With 64 KB flash, complete sensorless FOC firmware (AN11538 reference implementation) fits with room for application-specific curves and protection logic. The 2.4-3.6 V operating range and -40C to +105C temperature rating suit industrial fan/pump enclosures.
موصى به
Industrial Servo Drives and Robotics
In industrial servo and robotics applications, the LPC1547JBD48QL provides the deterministic performance and peripheral integration of a dedicated motion controller. The Cortex-M3 core's deterministic interrupt latency (12 cycles typical) ensures the FOC loop closes within tight timing windows required for high-dynamic servo response. Dual CAN interfaces support CANopen (CiA 402) and proprietary protocols simultaneously, while USB enables firmware update and parameter configuration. The 12 KB SRAM buffers sensor data and trajectory planning tables, with SCTimer/PWM generating synchronized multi-axis PWM signals. Hardware AES encryption protects proprietary motor calibration parameters.
موصى به
Digital Power Conversion (PFC, LLC, Phase-Shifted Full-Bridge)
The LPC1547JBD48QL suits digital power supply control loops where its SCTimer/PWM generates phase-shifted PWM signals for LLC and full-bridge topologies, and the high-speed ADCs sample input voltage, output voltage, and primary current at 2 Msps. The 72 MHz core executes voltage-mode and current-mode control loops with adaptive feed-forward at 100 kHz switching frequency. Hardware fault response through SCTimer capture events triggers sub-microsecond PWM shutdown, exceeding analog controller protection speed. With 64 KB flash, comprehensive firmware including PFC + LLC dual-stage control fits in a single chip.
موصى به
USB-Connected Motor Controller HMI Panels
For HMI panels and configuration tools connected via USB, the LPC1547JBD48QL's integrated USB 2.0 Full-Speed host/device controller eliminates the need for an external USB interface chip. The device can present a vendor-specific or HID interface for parameter tuning, firmware update, and diagnostic logging from a PC or tablet. With 12 KB SRAM available, USB endpoint buffers coexist with motor control data structures. The dual CAN interfaces allow bridge-mode operation between USB host tools and CANopen servo networks for factory commissioning.
موصى به
Battery-Powered Cordless Power Tools
In cordless power tool applications (drills, impact drivers, garden tools), the LPC1547JBD48QL's Cortex-M3 efficiency and integrated peripherals support 18-36 V battery pack motor control. The SCTimer/PWM generates 3-phase BLDC/PMSM drive signals, while dual ADCs monitor pack voltage, phase current, and motor temperature. The USB interface enables factory programming and field firmware updates. The 2.4-3.6 V core operation allows direct LDO regulation from 3S-10S Li-ion packs. Hardware AES protects OEM firmware against cloning in competitive markets.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LPC1547JBD48QL — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
Choose the LPC1548JBD48QL (same package, 256 KB flash, 36 KB SRAM) when you need additional memory for advanced control algorithms, multi-axis trajectory planning, or runtime firmware update without bootloader intervention.
Choose the LPC11C14FBD48/301 for cost-sensitive brushed DC or stepper applications where the Cortex-M0 50 MHz core and 10-bit ADC suffice; it shares the 48-LQFP package for drop-in cost-down migration.
المقارنة مع البدائل
| المعامل | هذا المنتج | LPC1548JBD48QL | LPC1547JBD48E | LPC1519JBD64E | LPC1517JBD64E | LPC11C14FBD48/301 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 64-LQFP (10x10) | 64-LQFP (10x10) | 48-LQFP (7x7) - same |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M0 |
| Max Clock Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 50 MHz |
| Flash Memory | 64 KB | 256 KB | 64 KB | 256 KB | 64 KB | 32 KB |
| SRAM | 12 KB | 36 KB | 12 KB | 36 KB | 12 KB | 8 KB |
| ADC | 2 x 12-bit 2 Msps | 2 x 12-bit 2 Msps | 2 x 12-bit 2 Msps | 1 x 12-bit 2 Msps | 1 x 12-bit 2 Msps | 1 x 10-bit |
| USB | USB FS Host/Device | USB FS Host/Device | USB FS Host/Device | USB FS Host/Device | USB FS Host/Device | No |
أبرز الفروقات
- Dual 12-bit 2 Msps ADCs with simultaneous sampling (مقابلLPC1517JBD64E)
- Full SCTimer/PWM with 24 channels and state-machine capture (مقابلLPC11C14FBD48/301)
- 64 KB flash vs 32 KB for entry-level motor MCUs (مقابلLPC11C14FBD48/301)
- Integrated dual CAN 2.0B for industrial networking (مقابلLPC1517JBD64E)
ملاحظات التصميم
Place 100 nF decoupling capacitors within 5 mm of each VDD/VSS pin pair (pins 5/6, 46/47) to maintain ADC SNR during PWM switching edges. Estimated: with 1 A switching current at 20 kHz PWM, inductance from 10 mm trace exceeds 50 nH, causing 0.5 V droop - insufficient for ADC reference stability. Use a 4-layer PCB with continuous ground plane beneath the LQFP for thermal dissipation (theta_JA approximately 76 C/W with no airflow).
At 72 MHz with all peripherals active, the LPC1547JBD48QL draws approximately 50 mA from 3.3 V (165 mW dissipation). With 7x7 mm LQFP theta_JA of 76 C/W, junction temperature rise is 12.5 C above ambient - well within the 105 C rating for industrial enclosures. If operating at extended 105 C ambient, reduce clock to 60 MHz or add copper pour thermal relief beneath the exposed pad region.
Route ADC input traces as differential pairs with ground shielding, keeping trace length under 30 mm to preserve SNR. The dual ADC simultaneous sampling requires both ADC0 and ADC1 channels to use matched source impedance; mismatched impedance above 100 ohm imbalance causes sampling skew beyond 1 ns, degrading FOC current measurement accuracy.
Do not enable both USB pull-up and the internal pull-up on the same I/O pin during USB enumeration - the LPC1547 ROM bootloader configures USB DP/DM pins and external pull-up conflicts cause enumeration failure. Always ground the unused XTAL2 pin if using external clock source, leaving the on-chip oscillator disabled to avoid leakage current of 200 uA.
Use the LPC1547's internal 12 MHz IRC as the PLL reference for USB start-up, then switch to external crystal for precision motor control timing. The USB Full-Speed specification requires 0.25% clock accuracy; the internal IRC with calibration achieves this while the external crystal at 12 MHz provides 50 ppm long-term stability for PWM edge accuracy.
معلومات الامتثال
RoHS compliant per NXP product page. Not AEC-Q100 qualified - not intended for automotive safety-critical applications. Halogen-free status not explicitly stated in provided data.