Texas Instruments

LT1014DDW - 4-Channel 44V Precision Op Amp | Texas Instruments

MPN: LT1014DDW ✓ نشط
5 V Vdss 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

LT1014DDW نظرة عامة

The Texas Instruments LT1014DDW is a four-channel precision operational amplifier with a 1 MHz gain-bandwidth product, 0.4 V/us slew rate, and a 5 V to 44 V supply-voltage range in a 16-pin SOIC package. The quad configuration integrates four amplifiers into one package, reducing board area in multichannel instrumentation, data acquisition, and industrial control systems where precise amplification of several independent signals is required.

A precision operational amplifier is a voltage amplifier that uses very high open-loop gain and negative feedback to achieve accurate closed-loop gain. Within the broader hierarchy, the LT1014 belongs to the operational-amplifier class of analog ICs used for signal conditioning, buffering, filtering, instrumentation, and drive functions. Its four internal channels also provide consistent supply and temperature behavior across a shared package.

The LT1014D family emphasizes low offset-voltage temperature coefficient, high gain, low supply current, and low noise. According to the Texas Instruments manufacturer datasheet, the LT1014D offers a maximum input offset voltage of 0.8 mV at 25 degrees Celsius, while the related LT1014 specification reaches 300 uV maximum at 25 degrees Celsius. The wide supply range supports both conventional laboratory rails and higher-voltage industrial systems.

The DDW suffix identifies the 16-pin SOIC configuration, providing four operational amplifiers in an industry-standard footprint. A gain-bandwidth product of 1 MHz makes the device suitable for low-to-moderate frequency precision signal paths, while the 0.4 V/us slew rate supports accurate transitions. These characteristics make the part more appropriate for instrumentation and control than for high-speed video or RF signal chains.

Typical applications include bridge and thermocouple signal conditioning, buffered sensor acquisition, low-level current measurement, industrial transducer interfaces, and precision control loops. Four channels can simplify multichannel designs when each signal requires similar input impedance, offset behavior, and supply-current characteristics.

Designers should verify common-mode range, output swing, stability, and load drive for the intended feedback configuration. Decoupling capacitors should be positioned close to the supply pins, and unused inputs should be tied to a defined potential near the signal common-mode range rather than left floating.

This product page combines manufacturer specifications, package and pin information, replacement cross-references, application guidance, and design-focused comparisons to support faster component selection and PCB planning.

بدائل مباشرة لـ LT1014DDW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

LT1014DDWR

✅ بديل مباشر
📦 16-SOIC
Same 4-channel topology, 44 V maximum supply and 16-pin SOIC interface; 0% difference in those confirmed headline ratings, with reel versus tube ordering configuration as the principal distinction

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1014DDWRE4

✅ بديل مباشر
📦 16-SOIC
Same Texas Instruments LT1014D family and 16-pin SOIC footprint with 4 channels and a 44 V maximum supply; ordering or qualification suffix differs while confirmed headline ratings remain equal

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1014DIDWRG4

✅ بديل مباشر
📦 16-SOIC
Same LT1014D 4-channel architecture and 44 V maximum supply in a 16-pin SOIC package; the suffix identifies a different ordering configuration and any detailed offset or temperature differences require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1014DMDWREP

✅ بديل مباشر
📦 16-SOIC
Same LT1014D 4-channel architecture, 44 V maximum supply and 16-pin SOIC footprint; ordering configuration differs while 0% difference is confirmed for channel count and supply ceiling

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1014ACN#PBF

✅ بديل مباشر
📦 16-SOIC
Cross-brand 4-channel precision operational amplifier with the same 16-pin SOIC interface, 5 V minimum supply and 44 V maximum supply; detailed offset, bias-current and noise differences require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1014DDW الحدود القصوى والخصائص الكهربائية

Number of Amplifiers 4 amplifiers
Amplifier Type Precision operational amplifier
Gain-Bandwidth Product 1 MHz
Slew Rate 0.4 V/us
Minimum Total Supply Voltage 5 V
Maximum Total Supply Voltage 44 V
Input Offset Voltage at 25 degrees Celsius 0.8 mV maximum for LT1014D
Related LT1014 Input Offset Voltage at 25 degrees Celsius 300 uV maximum
Related LT1014 Input Offset Voltage Temperature Coefficient 2.5 uV/degrees Celsius maximum
العلبة 16-pin SOIC
عدد الأطراف 16 pins
نوع التركيب Surface mount

تكوين أطراف LT1014DDW

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 OUT1 — Channel 1 output
دبوس 2 V- — Negative supply connection
دبوس 3 +IN1 — Channel 1 non-inverting input
دبوس 4 -IN1 — Channel 1 inverting input
دبوس 5 OFFSET NULL — Channel 1 offset-voltage null
دبوس 6 OUT2 — Channel 2 output
دبوس 7 +IN2 — Channel 2 non-inverting input
دبوس 8 -IN2 — Channel 2 inverting input
دبوس 9 V+ — Positive supply connection
دبوس 10 OUT3 — Channel 3 output
دبوس 11 +IN3 — Channel 3 non-inverting input
دبوس 12 -IN3 — Channel 3 inverting input
دبوس 13 OFFSET NULL — Channel 4 offset-voltage null
دبوس 14 OUT4 — Channel 4 output
دبوس 15 +IN4 — Channel 4 non-inverting input
دبوس 16 -IN4 — Channel 4 inverting input

التطبيقات النموذجية

LT1014DDW مناسب لـ 6 التطبيقs: Precision Sensor Signal Conditioning, Industrial Transducer Interface, Low-Level Current Measurement, Data Acquisition Front End, Precision Control Loops, Portable Measurement Equipment.

🏭

Precision Sensor Signal Conditioning

The LT1014DDW fits four-channel sensor conditioning because each amplifier combines a 1 MHz gain-bandwidth product with the low offset-voltage temperature coefficient associated with the LT1014 family. Place the four channels around bridge, strain-gauge, or low-level sensor outputs and use matched feedback networks to preserve channel consistency. Its 5 V to 44 V supply range accommodates both low-voltage instrumentation and higher industrial rails. The 0.4 V/us slew rate is sufficient for slow sensor signals, but the design should still verify input common-mode range and output swing at the selected gain. Using four matched channels in one SOIC can also simplify grounding, decoupling, and calibration compared with four unrelated amplifier packages.

🏭

Industrial Transducer Interface

The LT1014DDW is suitable for industrial transducer interfaces that require accurate amplification of slowly changing signals rather than high-bandwidth waveforms. Its 44 V maximum total supply supports wider operating rails used in industrial equipment, while the four-channel package allows one amplifier per input or an amplifier-plus-filter arrangement for each of two channels. The LT1014 family's low offset-voltage temperature coefficient helps reduce drift as the equipment changes temperature. For reliable operation, confirm the common-mode voltage of every transducer, provide adequate input protection, and place supply-bypass capacitors directly beside the package supply pins.

⚡

Low-Level Current Measurement

The LT1014DDW can amplify small voltage drops generated by shunt resistors or current-sense elements when the amplifier operates within its input and output limits. A 1 MHz gain-bandwidth product supports useful bandwidth for many power-conversion and monitoring loops, while 0.4 V/us slew rate provides faster settling than strictly DC instrumentation amplifiers. The four channels permit simultaneous current and voltage measurements, such as sensing two rails plus two control voltages. System designers should minimize Kelvin routing to the shunt, verify that offset and bias errors meet the measurement resolution, and avoid using slew-rate performance as a substitute for a full settling-time calculation.

📊

Data Acquisition Front End

The LT1014DDW provides four precision amplifier channels for buffering and gain-shaping analog front-end signals before digitization. Its low noise, high gain, and low offset-voltage temperature coefficient are useful for signals whose integrity could otherwise be degraded by upstream loading or temperature drift. The 5 V minimum operating supply supports conventional single-supply designs when the selected feedback network and load keep each output within its swing limits. Place each amplifier close to its source connector, maintain a consistent ground return, and check that the selected closed-loop gain is stable with the intended capacitive load and sampling system.

🔧

Precision Control Loops

The LT1014DDW can serve as the error amplifier in slow precision control loops where low offset drift and four-channel consistency are more important than high bandwidth. Possible uses include pressure, temperature, position, and analog set-point control, with two channels handling feedback and set-point functions. Its 1 MHz gain-bandwidth product gives adequate loop bandwidth for many process-control signals, and the 0.4 V/us slew rate helps maintain clean error corrections. The integrator and compensation network should be calculated around the actual output loading, supply voltage, and sampling delay to avoid instability or noise amplification.

📱

Portable Measurement Equipment

The LT1014DDW is useful in portable and field-test equipment because four precision channels can reduce the number of amplifier packages while maintaining consistent device characteristics. Low supply current is a stated LT1014 family feature, making the device relevant to battery-powered instrumentation with a 5 V minimum operating supply. The same package can support sensor buffering, gain stages, and active filtering across several channels. Designers should calculate total supply and quiescent current, confirm whether the measured signal requires rail-to-rail input or output capability, and use local decoupling to limit supply disturbance as the amplifier drives its load.

ملخص المنتجات الموصى بها

LT1014DDWR Same-family quad precision amplifier يُستخدم في: Precision Sensor Signal Conditioning, Low-Level Current Measurement, Portable Measurement Equipment LT1014ACN#PBF Cross-brand precision amplifier candidate يُستخدم في: Precision Sensor Signal Conditioning, Data Acquisition Front End, Portable Measurement Equipment LT1014DDWRE4 Same-family ordering option يُستخدم في: Industrial Transducer Interface, Data Acquisition Front End LT1014DMDWREP Same-family ordering option يُستخدم في: Industrial Transducer Interface, Precision Control Loops LT1014DIDWRG4 Same-family quad amplifier option يُستخدم في: Low-Level Current Measurement, Precision Control Loops
What are the key specifications of LT1014DDW that engineers should know?
The LT1014DDW is a four-channel precision operational amplifier rated for a 5 V to 44 V supply range, with 1 MHz gain-bandwidth product and 0.4 V/us slew rate in a 16-pin SOIC package. According to the Texas Instruments manufacturer datasheet, the LT1014D family provides low offset-voltage temperature coefficient, high gain, low supply current, and low noise. It is intended for precision multichannel signal conditioning rather than high-speed video amplification.
Where can I download the LT1014DDW datasheet PDF?
The LT1014DDW datasheet PDF is available through the Texas Instruments product information for the LT1014D family and the linked manufacturer datasheet mirror. The document covers the quad precision operational amplifier, electrical characteristics, applications information, and package details. The manufacturer identifies the LT1014, LT1014A, and LT1014D as quad precision operational amplifiers with low offset-voltage temperature coefficient, high gain, low supply current, and low noise.
Where can I find the LT1014DDW pinout?
The LT1014DDW pinout is shown in the LT1014D manufacturer datasheet under the package and connection diagrams. The DDW package contains 16 pins for four operational amplifiers, supply connections, and no-connect positions. Use the numbered pin-description table and package drawing when assigning PCB tracks, especially for the duplicated V+ and V- supply pins and the unused amplifier channels.
What can replace the LT1014DDW?
The LT1014DDWR and LT1014DDWRE4 are direct Texas Instruments options in the same 16-pin SOIC family, while the LT1014ACN#PBF from Analog Devices is a cross-brand quad precision operational-amplifier candidate. According to the LT1014 cross-reference information, several related LT1014 products are pin-to-pin replacements. Confirm channel pinout, supply limits, offset voltage, temperature grade, and production availability before replacing an installed part.
Is the LT1014DDW the same as the LT1014ACN#PBF?
The LT1014DDW and LT1014ACN#PBF share a four-channel precision operational-amplifier architecture, a 44 V maximum total supply rating, and a 16-pin SOIC interface. They are not necessarily identical in every electrical characteristic or qualification detail. According to the LT1014 comparison information, the Analog Devices version also supports a 5 V minimum total supply, so the footprint is compatible while input offset, bias current, noise, and temperature specifications should be checked directly.
What is the LT1014DDW vs LT1014DIDWRG4 difference?
The LT1014DDW and LT1014DIDWRG4 belong to the same Texas Instruments LT1014D four-channel precision operational-amplifier family and use a 16-pin SOIC package. The suffix identifies different ordering or qualification configurations, so the practical distinction may involve temperature grade, marking, or documentation rather than the basic amplifier topology. Compare the exact electrical and qualification tables before treating the parts as interchangeable production alternatives.
When should I choose LT1014DDW over another LT1014D option?
Choose the LT1014DDW when a 16-pin SOIC quad precision operational amplifier, a 5 V to 44 V supply range, and the documented LT1014D offset characteristics meet your circuit requirements. Select a specialized suffix when the PCB requires a different temperature grade, production configuration, or marking. For a different manufacturer, compare the Analog Devices LT1014ACN#PBF against every DC, AC, noise, and common-mode limit rather than relying on package compatibility alone.
Is LT1014DDW suitable for precision instrumentation?
The LT1014DDW is suitable for low-level instrumentation because it combines four precision amplifier channels, a 1 MHz gain-bandwidth product, and low offset-voltage temperature coefficient in one package. According to the Texas Instruments manufacturer datasheet, the family also features high gain and low noise. Its 0.4 V/us slew rate and 5 V minimum supply make it appropriate for slower sensor and control signals rather than wideband waveform systems.
Where can I buy LT1014DDW online?
Use the Request a Quote form on this page to request LT1014DDW pricing, current stock, minimum order quantity, and lead time from XAIPART. The component is a Texas Instruments 16-pin SOIC quad precision operational amplifier. The request should include your required quantity, target date, and acceptable package or delivery configuration so the commercial answer can be matched to the production schedule.
What is the price of LT1014DDW?
The current LT1014DDW price depends on order quantity, delivery condition, and required packaging, so use the Request a Quote form on this page for the current quotation. The device is a 4-channel, 1 MHz precision operational amplifier in a 16-pin SOIC package from Texas Instruments. Quote requests should specify quantity, target date, and whether factory-sealed tube or reel handling is required.
What is the lead time for LT1014DDW?
The current lead time for LT1014DDW should be confirmed through the Request a Quote form on this page. Lead time can vary with quantity, factory inventory, and required delivery format. Submit the planned order quantity and required arrival date to obtain a production-oriented commitment for this Texas Instruments 16-pin SOIC precision operational amplifier.
Is LT1014DDW in stock?
Stock status for LT1014DDW changes with quantity and packaging requirements, so use the Request a Quote form on this page for a current availability confirmation. The part is a Texas Instruments quad precision operational amplifier in a 16-pin SOIC package. Include your quantity, reel or tube preference, and delivery location in the request.
What is the best Analog Devices equivalent for LT1014DDW?
The LT1014ACN#PBF from Analog Devices is the closest cross-brand candidate identified for the LT1014DDW because both are four-channel precision operational amplifiers with a 44 V maximum total supply rating and a 16-pin SOIC package. According to the LT1014 comparison information, both support a 5 V minimum total supply. Confirm offset voltage, bias current, noise, common-mode range, and temperature grade before final substitution.
How many amplifiers are in the LT1014DDW package?
The LT1014DDW contains four independent precision operational amplifiers in a 16-pin SOIC package. According to the Texas Instruments product page, the LT1014, LT1014A, and LT1014D are quad precision operational amplifiers. Integrating four channels can reduce external package count and simplify routing when several sensors or control signals require similar conditioning.
Does the LT1014DDW support a 44 V supply?
The LT1014DDW supports a maximum total supply voltage of 44 V and a minimum total supply voltage of 5 V. The Texas Instruments product information describes the family as a low-power precision operational amplifier with a wide supply range. Actual usable input and output voltages remain constrained by the amplifier's common-mode and output-swing specifications, so those limits must be checked separately.

بيانات مرجعية هندسية لـ LT1014DDW — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LT1014DDW when the design requires four precision amplifier channels in a 16-pin SOIC, a 5 V to 44 V supply range, and the documented LT1014D performance characteristics. Use LT1014DDWR when the supply chain requires the reel-ordering configuration of the same family; use LT1014DDWRE4, LT1014DIDWRG4, or LT1014DMDWREP when their ordering or qualification attributes better match the production environment. Consider the Analog Devices LT1014ACN#PBF for cross-brand sourcing, but compare offset voltage, bias current, noise, common-mode range, temperature limits, and electrical-test limits before substitution. The common 16-pin footprint simplifies mechanical replacement, but successful interchangeability still requires electrical validation.

المقارنة مع البدائل

المعامل هذا المنتج LT1014DDWR LT1014DDWRE4 LT1014DIDWRG4 LT1014DMDWREP LT1014ACN#PBF
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Number of Channels 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers
Primary Functional Family Quad precision operational amplifier Quad precision operational amplifier Quad precision operational amplifier Quad precision operational amplifier Quad precision operational amplifier Quad precision operational amplifier

أبرز الفروقات

  • Four precision channels in one standard package (مقابلLT1014DDWR)
  • Wide total supply range for precision analog systems (مقابلLT1014ACN#PBF)
  • Precision performance with adequate instrumentation bandwidth (مقابلLT1014DIDWRG4)

ملاحظات التصميم

Check the actual supply configuration and input common-mode range at every temperature. The device accepts a 5 V to 44 V total supply, but that rating does not make every input voltage valid under single-supply operation. Keep operating signals inside the input common-mode range and preserve output headroom for the selected load. Place a high-frequency bypass capacitor and a bulk capacitor close to the supply pins, with a short return path to the device ground.

Route each high-impedance input directly to its assigned amplifier pin and keep the input node physically small to reduce leakage and interference pickup. Place feedback components close to the relevant amplifier pins, and connect the offset-null circuitry only as directed by the manufacturer datasheet. Maintain a continuous ground reference across all four channels and avoid routing high-current or switching paths beneath the precision input nodes.

Do not leave an unused amplifier input floating. Tie each unused input to a defined reference compatible with its common-mode range and prevent excessive differential voltage. Also verify slew-rate-limited settling time rather than relying only on the 1 MHz gain-bandwidth product. The 0.4 V/us slew rate means a large output transition can determine the actual settling time, particularly at low closed-loop gain.

For small-signal acquisition, evaluate offset voltage, input bias current, noise, common-mode rejection, and temperature drift as a combined error budget. The LT1014D has a maximum 0.8 mV input offset at 25 degrees Celsius, which can be significant for millivolt-level sensor outputs. A higher closed-loop gain can reduce the offset contribution at the output, but it also narrows the allowable input range and may increase noise amplification.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive compliance declaration was identified for the exact LT1014DDW ordering configuration. Check the current Texas Instruments product page or the latest manufacturer datasheet before assigning environmental or automotive requirements.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LT1014DDW datasheet LT1014DDW pinout LT1014DDW datasheet pdf LT1014DDW equivalent LT1014DDW replacement LT1014DDW cross reference LT1014DDW vs LT1014ACN#PBF LT1014DDW 16-SOIC pinout LT1014DDW application circuit LT1014DDW price LT1014DDW stock Texas Instruments LT1014DDW

المكونات والمصطلحات ذات الصلة

Texas Instruments LT1014DDW LT1014D LT1014 LT1014A LT1014DDWR LT1014DDWRE4 LT1014DIDWRG4 LT1014DMDWREP LT1014ACN#PBF Analog Devices precision operational amplifier quad operational amplifier analog IC signal conditioning instrumentation amplifier gain-bandwidth product slew rate input offset voltage input bias current common-mode voltage SOIC 16-SOIC surface-mount package
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر