Analog Devices

LTC1050CP Precision Zero-Drift Operational Amplifier | Analog Devices

MPN: LTC1050CP ✓ نشط
الحد الأدنى للطلب: 1 |

LTC1050CP نظرة عامة

The Analog Devices LTC1050CP is a precision zero-drift operational amplifier with two internal sample-and-hold capacitors, offered in the LTC1050CP commercial-temperature package configuration. This low-cost op amp combines a chopper-stabilized architecture with on-chip capacitors, reducing the external components normally associated with zero-drift amplifiers. Its primary applications include precision current sensing, low-level signal amplification, instrumentation, sensor interfaces, and feedback loops requiring low offset voltage and stable DC performance.

A zero-drift operational amplifier is a precision amplifier designed to minimize input offset voltage drift over time and temperature. It belongs to the operational-amplifier hierarchy, which includes instrumentation, rail-to-rail, precision, and comparator circuits. Unlike a conventional amplifier whose input offset can move as temperature changes, the LTC1050 uses periodic zero-drift correction to reduce low-frequency offset movement. This makes it useful when a small sensor voltage must be amplified without introducing a large error over the measurement interval.

The LTC1050 family integrates the two sample-and-hold capacitors normally placed outside many chopper-stabilized amplifiers. Removing those external capacitors simplifies PCB layout and reduces the number of components requiring assembly and inspection. According to the manufacturer datasheet, this integration allows the amplifier to offer improved combined DC and AC performance compared with conventional implementations that require external chopping capacitors. The result is a compact solution for precision analog front ends.

The zero-drift architecture is particularly effective for signals concentrated near DC, including strain-gauge outputs, pressure-sensor signals, thermocouple interfaces, and low-level error amplifiers. Chopper-related frequency components remain relevant when the closed-loop bandwidth approaches the amplifier's chopper frequency, so the complete signal chain must be checked for noise at those harmonics. Input and output filtering should be selected according to the required measurement bandwidth rather than simply maximizing bandwidth.

Typical uses include bridge-sensor amplification, precision current measurement, low-voltage sensor conditioning, instrumentation inputs, and active low-pass filters. The integrated sampling capacitors make it particularly attractive where board area or assembly complexity is more important than high-frequency performance. In feedback applications, designers should include adequate phase margin and verify settling after chopping transitions before treating the amplifier as a conventional wideband op amp.

The primary design consideration is to preserve the zero-drift benefit without introducing excessive noise. Decoupling capacitors should be placed close to the supply pins, sensitive input traces should be kept short, and the output should avoid driving long capacitive loads unless stability has been confirmed. The datasheet's application guidance and test conditions should also be used to establish acceptable offset, noise, bias-current, and common-mode limits for the intended application.

This product page combines the LTC1050CP identity, manufacturer documentation references, engineering applications, design guidance, and a traceable list of authoritative sources. It also highlights where circuit-level validation is necessary, particularly for chopping noise, stability, common-mode range, supply selection, and any proposed direct replacement.

بدائل مباشرة لـ LTC1050CP — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

LTC1050CP الحدود القصوى والخصائص الكهربائية

Amplifier Type Precision zero-drift operational amplifier
Architecture Chopper-stabilized zero-drift architecture
Integrated Capacitors 2 internal sample-and-hold capacitors

دليل تكوين أطراف LTC1050CP standard

تكوين الأطراف لـ LTC1050CP (حزمة standard). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة standard لـ LTC1050CP

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LTC1050CP.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LTC1050CP مناسب لـ 6 التطبيقs: Precision Current Sensing, Bridge Sensor Signal Conditioning, Low-Level Instrumentation Amplifier, Low-Voltage Sensor Interface, Thermocouple Amplification, Precision Active Filtering.

⚡

Precision Current Sensing

The LTC1050CP is appropriate for low-level current measurements where a shunt produces a small differential voltage and offset drift can obscure the useful signal. Its zero-drift architecture is designed to reduce input-offset movement over time and temperature, while two integrated sample-and-hold capacitors remove the external capacitors normally associated with chopper amplifiers. Place the amplifier close to the shunt to minimize pickup and route the differential pair as a short, matched pair. Confirm that the shunt common-mode voltage, supply voltage, output swing, and gain remain within the datasheet limits. Gain-bandwidth and noise requirements should also be checked because increasing closed-loop gain reduces bandwidth and may amplify chopping-related spectral content.

🏭

Bridge Sensor Signal Conditioning

The LTC1050CP can amplify the small differential output of a resistive bridge used in pressure, force, or strain measurement. Zero-drift correction is valuable because bridge output can be near zero, where a few microvolts of input-offset drift may represent a significant fraction of the full-scale signal. The integrated pair of sample-and-hold capacitors simplifies the amplifier section compared with a conventional external-capacitor chopper implementation. Use a low-noise supply and reference for the bridge excitation, connect the amplifier inputs with short, symmetric routing, and keep the sensitive node away from switching circuitry. Validate input bias current, common-mode range, noise, and settling against the required measurement bandwidth.

🖥️

Low-Level Instrumentation Amplifier

The LTC1050CP can serve as a precision input stage in instrumentation and test equipment where long-term DC accuracy matters more than wideband response. Its zero-drift operation minimizes offset movement, and the two on-chip sample-and-hold capacitors reduce external component count in the signal path. This is especially helpful in multichannel measurement systems in which several front-end amplifiers must track small sensor outputs without changing calibration significantly over operating time. Use adequate supply bypassing near the device, maintain balanced input routing, and place filtering close to the amplifier when chopping-related components must be removed. Confirm the gain-bandwidth product, maximum output swing, and common-mode limitations at the highest expected input level.

🧩

Low-Voltage Sensor Interface

The LTC1050CP fits low-voltage sensor interfaces that generate signals close to the lower end of the amplifier's input range. A zero-drift amplifier reduces the time-dependent error that can otherwise dominate when signal amplitude is small compared with the sensor's full-scale range. The two integrated sample-and-hold capacitors simplify board assembly, which is beneficial in compact sensor modules. The amplifier should be powered from a supply that satisfies the input and output common-mode requirements while leaving sufficient output swing for the selected gain. Check bias-current error, noise density, overload recovery, and the effect of the gain-bandwidth product before selecting the closed-loop gain. A post-amplifier filter may be needed if the measurement bandwidth is narrower than the chopping spectrum.

🌡️

Thermocouple Amplification

The LTC1050CP is useful for conditioning low-level thermocouple voltages where a stable baseline is critical to measurement accuracy. Thermocouple signals can begin at very low microvolt levels, making offset drift and input bias current important contributors to error. The zero-drift topology helps maintain a more stable DC operating point than a conventional amplifier, while the internal sample-and-hold capacitors reduce the external component burden. Place the amplifier close to the thermocouple input and avoid routing the high-impedance node through long traces. Cold-junction compensation and the reference junction must be designed separately. Verify input bias current, noise, common-mode range, and the narrow bandwidth needed for the temperature measurement.

🔧

Precision Active Filtering

The LTC1050CP can be used in precision active low-pass filters for slow sensor signals where minimizing offset drift is more important than preserving wideband performance. The chopper-stabilized architecture can maintain a more stable DC operating point, and the two integrated sample-and-hold capacitors reduce the number of external components associated with the amplifier itself. Configure the filter with feedback components suitable for the intended gain and bandwidth, then verify phase margin because the amplifier's internal chopping mechanism can affect small-signal and large-signal behavior. Add an anti-alias or notch filter if the sampling frequency falls within the measurement band. Confirm resistor matching, capacitor tolerances, output swing, and settling before calibration.

What is the LTC1050CP precision zero-drift operational amplifier?
The LTC1050CP is a low-cost precision zero-drift operational amplifier that integrates two sample-and-hold capacitors on chip. According to the Analog Devices LTC1050 datasheet, these internal capacitors are the two components normally required externally by other chopper-stabilized amplifiers. The integration reduces assembly complexity while supporting improved combined DC and AC performance in precision measurement circuits.
What are the key specifications of LTC1050CP that engineers should know?
The central specifications of the LTC1050CP are its zero-drift operational-amplifier architecture and two integrated sample-and-hold capacitors. The manufacturer describes the LTC1050 as a high-performance, low-cost precision amplifier with improved combined DC and AC performance. Detailed limits for offset voltage, drift, bandwidth, supply voltage, noise, and common-mode range must be taken from the corresponding tables in the manufacturer datasheet.
Why does the LTC1050 integrate two sample-and-hold capacitors?
The LTC1050 integrates two sample-and-hold capacitors to support its chopper-stabilized zero-drift operation. The manufacturer datasheet states that these are the two capacitors usually required externally by other chopper amplifiers. Keeping them on the die simplifies the PCB, reduces component count, and avoids the assembly and tolerance issues associated with two external sampling capacitors.
Is LTC1050CP suitable for precision current sensing?
The LTC1050CP is suitable for low-level current-sensing signals because its zero-drift architecture is intended to minimize offset movement with time and temperature. Its two integrated sample-and-hold capacitors also simplify the analog front end. The shunt signal, amplifier gain, common-mode voltage, and required measurement bandwidth must still remain within the datasheet limits.
Where can I download the LTC1050CP datasheet PDF?
The manufacturer-hosted LTC1050 datasheet PDF is available through the Analog Devices technical-document link on this page. The document is titled “Precision Zero-Drift Operational Amplifier with Internal Capacitors” and includes the family description, electrical characteristics, pin information, application guidance, and ordering information needed to select the correct package suffix.
Where can I find the LTC1050CP pinout?
The LTC1050CP pin assignment is shown in the pin-configuration section of the Analog Devices LTC1050 datasheet. Use that diagram and the associated pin descriptions when assigning PCB tracks, especially for supply connections, offset null, and the electrical characteristics that apply to each pin. The package dimensions should be taken from the corresponding mechanical drawing.
What can replace the LTC1050CP on an existing PCB?
A direct replacement must use the same package footprint, pin arrangement, supply range, common-mode range, and output swing. The LTC1050CP cannot be declared drop-in compatible solely because another amplifier also uses a zero-drift architecture. Use the Request a Quote form on this page to request an engineering review of a proposed substitution, including pin compatibility and parameter differences.
What is the best cross-brand equivalent for LTC1050CP?
The best cross-brand equivalent is the part that matches the LTC1050CP package and pinout while meeting the required offset drift, noise, bandwidth, supply, and common-mode limits. Package identity alone does not establish equivalence because offset-null behavior and internal chopping architecture may differ. Request a comparative engineering review through the Request a Quote form on this page.
Is LTC1050CP the same as other LTC1050 package variants?
The LTC1050CP and other LTC1050 orderable variants belong to the same precision zero-drift amplifier family, but their package suffixes may change the mechanical outline, pin count, temperature grade, or production status. The LTC1050CP must be compared with a candidate using its exact suffix rather than treating every LTC1050 designation as electrically and mechanically interchangeable.
LTC1050CP versus a conventional precision op amp: which is better for DC measurement?
The LTC1050CP is generally better suited to low-frequency precision measurements where input-offset drift can dominate the error budget. Its chopper-stabilized zero-drift operation reduces offset movement over time and temperature, and its two integrated sampling capacitors simplify the circuit. A conventional amplifier may be preferable for wideband, low-noise signal-chain work beyond the LTC1050's chopping-frequency region.
When should I choose the LTC1050CP over a conventional operational amplifier?
Choose the LTC1050CP when the measured signal is near DC, offset drift is a primary error source, and integrating the two sample-and-hold capacitors offers a meaningful assembly or layout advantage. Its trade-off is the presence of chopping-related spectral components. Confirm that these components and the closed-loop settling behavior remain acceptable for the target bandwidth and measurement accuracy.
Is LTC1050CP suitable for bridge-sensor and strain-gauge measurements?
The LTC1050CP is well suited to bridge-sensor and strain-gauge front ends because low-level differential signals can be affected by input-offset drift and input bias current. Zero-drift operation improves long-duration measurement stability, while the integrated sampling capacitors reduce external component count. Common-mode voltage, supply headroom, noise bandwidth, and bridge excitation requirements must be verified before final selection.
Where can I buy LTC1050CP and what is the current lead time?
Use the Request a Quote form on this page to request LTC1050CP availability, current lead time, minimum order quantity, and shipping details. The current commercial position should be confirmed at quotation time because production status and component availability can change. Do not infer stock level from a product page or from the existence of a catalog listing.
What is the price of LTC1050CP?
The current LTC1050CP price is available through the Request a Quote form on this page. The form can capture the required quantity, package suffix, and delivery destination so the commercial response reflects the actual order configuration. No static unit price is used on this page because component pricing and quantity breaks can change over time.
Is LTC1050CP in stock?
Current LTC1050CP stock should be confirmed through the Request a Quote form on this page. Because inventory changes by package suffix and order quantity, submit the exact MPN, quantity, and destination for the latest allocation. The production listing on the manufacturer product page indicates family availability but is not a guarantee of immediate stock.
Does the LTC1050CP comply with RoHS and automotive qualification requirements?
RoHS, REACH, and AEC-Q100 status must be confirmed for the exact LTC1050CP orderable configuration in the manufacturer product documentation. The commercial CP suffix does not by itself establish automotive qualification. If the product enters a vehicle application, request the applicable compliance declaration and qualification record before releasing the design.

بيانات مرجعية هندسية لـ LTC1050CP — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LTC1050CP when the primary task is amplifying a low-level, near-DC signal and input-offset drift would materially affect accuracy. It is especially attractive when board area or assembly simplicity matters because the two sample-and-hold capacitors are integrated. Choose a conventional precision amplifier instead when wideband behavior, low-noise signal-chain performance, or freedom from chopping-related spectral components is more important than drift reduction. When considering a direct substitute, the candidate must match the exact package and pinout and must also satisfy supply voltage, common-mode range, output swing, offset, drift, bias-current, noise, bandwidth, and temperature requirements. No drop-in alternatives are listed because the cross-reference material does not identify candidates whose package and complete electrical compatibility can be confirmed.

المقارنة مع البدائل

المعامل هذا المنتج
Product Type Precision zero-drift operational amplifier
Amplifier Architecture Chopper-stabilized zero-drift
Integrated Sample-and-Hold Capacitors 2 internal capacitors
Brand Analog Devices
External Chopper Capacitors Required 0; two sample-and-hold capacitors are integrated

أبرز الفروقات

  • Two sample-and-hold capacitors are integrated on the device (مقابلConventional external-capacitor chopper amplifier)
  • Zero-drift architecture targets low-frequency offset stability (مقابلConventional precision operational amplifier)
  • Combining DC stability with integrated chopping components (مقابلWideband precision operational amplifier)

ملاحظات التصميم

Place the LTC1050CP close to the precision signal source and keep the differential input routes short and symmetric. Route sensitive inputs away from switching nodes, high-current supply paths, and inductors. If the package includes an exposed thermal pad, follow the datasheet land pattern and connect the pad to the specified ground or supply reference rather than substituting a generic footprint.

Zero-drift correction introduces periodic chopping-related components that may appear above the measurement bandwidth. Characterize the closed-loop amplifier with the intended feedback network and input filter, then add a notch or low-pass stage only if those components would contaminate the result. Also verify settling after chopping transitions before using the circuit for time-critical precision measurements.

Do not select a replacement solely by amplifier function or package family. Confirm the exact pinout, supply range, input common-mode range, output swing, offset drift, bias current, noise, bandwidth, and temperature grade. The two internal sample-and-hold capacitors are a defining LTC1050 feature, so a conventional amplifier with otherwise attractive specifications may require different external compensation and board layout.

Use the supply range specified for the exact LTC1050CP configuration and place the required bypass capacitors close to the supply pins. Check that the output can reach the target voltage with the planned load and feedback gain. In precision low-current measurements, verify that input bias current and supply-current variations are small enough for the target error budget.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Confirm the exact LTC1050CP compliance and qualification declarations with Analog Devices before production release.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ltc1050 crane LTC1050CP datasheet LTC1050CP datasheet pdf LTC1050CP pinout LTC1050CP equivalent LTC1050CP replacement LTC1050CP cross reference Analog Devices LTC1050CP LTC1050CP price LTC1050CP stock LTC1050CP application circuit LTC1050CP zero drift amplifier

المكونات والمصطلحات ذات الصلة

Analog Devices Texas Instruments Linear Technology LTC1050CP LTC1050 precision operational amplifier zero-drift operational amplifier chopper-stabilized amplifier instrumentation amplifier sample-and-hold capacitor input offset voltage input offset drift input bias current common-mode voltage range gain bandwidth product voltage noise density precision current sensing bridge sensor strain gauge thermocouple interface active low-pass filter sensor signal conditioning RoHS REACH AEC-Q100
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر