M2GL010-TQ144I - 12K LEs Low-Power FPGA | Microchip Technology
MPN: M2GL010-TQ144I ✓ نشطM2GL010-TQ144I نظرة عامة
An FPGA is a semiconductor whose digital circuit is configured after manufacture. Within the programmable-logic hierarchy, an FPGA provides more flexibility than a fixed-function microcontroller for parallel data paths, protocol bridging, signal conversion, I/O expansion, and deterministic hardware control. The IGLOO2 family targets general-purpose functions where low power, short development cycles, and cost-sensitive implementation are important.
The M2GL010-TQ144I provides 12,084 logic elements and 84 user I/O pins, making it suitable for systems requiring moderate parallel logic capacity. Its 933,888-bit embedded RAM supports buffers, packet storage, lookup functions, and other stateful operations without external memory. Configuration memory is integrated as flash, allowing the device to retain its programmed configuration when power is removed.
The device supports a 1.14 V to 2.625 V operating supply range and is packaged in a surface-mount 144-TQFP measuring 20 mm by 20 mm. Its 84 user I/O pins provide substantial connectivity for bridges, converters, control interfaces, and mixed peripheral logic. Designers should use the IGLOO2 packaging and pin-description guide when assigning bank voltages, checking differential I/O requirements, and planning the board-level footprint.
Typical applications include industrial protocol bridges, serial and parallel interface conversion, I/O expansion, data acquisition front ends, system management, secure connectivity, and compact embedded control. The large pin count is particularly useful when several independent interfaces must converge on one programmable logic device. The M2GL010-TQ144I also fits cost-sensitive designs that benefit from reconfigurable hardware and rapid board-level iteration.
A key implementation consideration is I/O-bank voltage compatibility. Confirm each external signal's voltage against the assigned I/O bank and the device power rails before finalizing the schematic. Keep power and ground distribution symmetrical, follow the package recommendations, and place decoupling capacitance close to the relevant supply pins.
This product overview combines the manufacturer's IGLOO2 device information, packaging guidance, package and interface characteristics, application guidance, and compatible ordering variants to support engineering selection and PCB implementation.
بدائل مباشرة لـ M2GL010-TQ144I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع M2GL010-TQ144I (نفس عامل الشكل والبصمة) — يختلف في Logic Elements, Device Type, Programmable Logic, User I/O Pins.
M2GL010-TQG144I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
M2GL010-TQG144
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←M2GL010-TQ144
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←M2GL010-TQ144I الحدود القصوى والخصائص الكهربائية
| Device Type | IGLOO2 Low-Density Flash FPGA |
| Logic Elements | 12,084 logic elements |
| User I/O Pins | 84 user I/O pins |
| Embedded RAM | 933,888 bits |
| Operating Supply Voltage Range | 1.14 V to 2.625 V |
| Configuration Memory | Flash |
| العلبة | 144-pin TQFP |
| Package Dimensions | 20 mm x 20 mm |
| نوع التركيب | Surface mount |
| Programmable Logic Family | IGLOO2 |
| Product Function | General-purpose programmable logic |
| Power Class | Low-power FPGA |
دليل تكوين أطراف M2GL010-TQ144I 20 mm x 20 mm
تكوين الأطراف لـ M2GL010-TQ144I (حزمة 20 mm x 20 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ M2GL010-TQ144I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
M2GL010-TQ144I مناسب لـ 6 التطبيقs: Industrial Protocol Bridging, Data Acquisition and Signal Conditioning, Secure Connectivity and Authentication, System Management and I/O Expansion, LED Lighting and Display Control, Communications Interface Conversion.
Industrial Protocol Bridging
The M2GL010-TQ144I fits industrial protocol-bridging designs that must translate between several interfaces without adding a separate processor. Its 12,084 logic elements can implement parallel-to-serial conversion, framing logic, and state machines, while 84 user I/O pins provide substantial board-level connectivity. The 933,888 bits of RAM can hold buffers, command queues, and protocol state. The 1.14 V to 2.625 V supply range is suitable for low-voltage system architectures, but every external interface must remain compatible with its assigned I/O bank. Engineers should also consider isolation, surge protection, and industrial qualification requirements at the system level.
موصى به
Data Acquisition and Signal Conditioning
The M2GL010-TQ144I is useful in acquisition and signal-conditioning systems that require parallel logic, acquisition control, and data formatting in one programmable device. With 12,084 logic elements, it can implement sampling control, trigger logic, digital filtering, and interface conversion in parallel. Its 84 user I/O pins support sensor inputs, capture buses, and downstream processors, while 933,888 bits of RAM provide configurable capture and buffering resources. The 1.14 V to 2.625 V operating range fits low-voltage mixed-signal systems when suitable analog front ends perform the initial conditioning. Validate input thresholds, timing margins, clocking, and I/O-bank voltage levels against the finished acquisition architecture.
موصى به
Secure Connectivity and Authentication
The M2GL010-TQ144I can support secure-connectivity and authentication functions that combine protocol handling, key-state management, and I/O control. The 12,084 logic elements are sufficient for parallel cryptographic datapaths, packet filtering, and control logic, while the embedded 933,888-bit RAM can support working buffers and state handling. Its 84 user I/O pins allow the FPGA to bridge external communication devices, sensors, and secure storage. Because flash configuration retains the programmed design without continuous power, the device also fits applications needing rapid field updates or reconfiguration. Security assurance still depends on the implemented algorithms, key-protection design, update process, and the complete product architecture rather than the FPGA part number alone.
موصى به
System Management and I/O Expansion
The M2GL010-TQ144I is appropriate for centralized system-management logic that monitors discrete signals, controls power sequencing, and expands communication channels. Its 84 user I/O pins reduce the need for multiple simple expansion components, while 12,084 logic elements can implement health monitoring, fault latching, and multi-interface arbitration. The 933,888 bits of embedded RAM can buffer status and diagnostic records. Operating from 1.14 V to 2.625 V supports integration with modern low-voltage processors and serial transceivers. Engineers should define reset behavior, fail-safe states, and power-up sequencing before programming the logic, then verify all I/O-bank assignments against the system voltages in the schematic review.
موصى به
LED Lighting and Display Control
The M2GL010-TQ144I can drive coordinated LED arrays, status indicators, and compact display-control logic when deterministic parallel updates are useful. The 84 user I/O pins allow multiple character segments, indicator groups, or multiplexed display lines to be managed through programmed timing and state machines. Its 12,084 logic elements and 933,888 bits of RAM support animation, calibration tables, and display buffering without relying entirely on an external microcontroller. The 1.14 V to 2.625 V supply range can simplify integration with low-voltage digital systems. LED drive topology, current limiting, brightness control, refresh timing, and voltage compatibility must be designed around the actual panel; the FPGA supplies logic and timing rather than LED current regulation.
موصى به
Communications Interface Conversion
The M2GL010-TQ144I suits communications designs that need parallel-to-serial conversion, framing adaptation, clock-domain coordination, or multiple low-speed interfaces. Twelve thousand eighty-four logic elements provide substantial parallel-processing capacity, and 84 user I/O pins simplify connections to transceivers, headers, and legacy peripherals. The 933,888 bits of RAM can accommodate packet buffering and transmit descriptors, while flash configuration supports rapid product updates. Its 1.14 V to 2.625 V supply range can align with modern communication ICs. Designers should establish the target baud rate, signal integrity method, clock source, and protocol timing before implementation, then confirm that each transceiver and connector path is compatible with the selected I/O bank.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ M2GL010-TQ144I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | M2GL010-TQG144I | M2GL010-TQG144 | M2GL010-TQ144 |
|---|---|---|---|---|
| Package | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
أبرز الفروقات
- Matches the documented 144-pin IGLOO2 resource profile (مقابلM2GL010-TQG144I)
- Uses the same 144-TQFP board footprint (مقابلM2GL010-TQG144)
- Combines moderate parallel capacity with high I/O availability (مقابلM2GL010-TQ144)
ملاحظات التصميم
Use the 144-TQFP land pattern and pin-1 orientation from Microchip's IGLOO2 packaging guide. The M2GL010-TQ144I uses 84 user I/O pins in a dense 20 mm by 20 mm package, so stable routing and adequate solder-mask clearance are important. Review the assembly drawing for pin-1 location, package tolerances, and any recommended land-pattern modifications before releasing the PCB artwork.
Plan the 1.14 V to 2.625 V supply network around the device's core and I/O-bank requirements. Place decoupling capacitance close to the supply and ground pins, keep return-current paths continuous, and separate noisy switching supplies from sensitive logic where practical. Review each bank's allowed input and output voltage in the IGLOO2 pin-description guide before connecting external interfaces.
Assign clocks, high-speed interfaces, and ordinary user signals to banks that meet their voltage and timing requirements. The M2GL010-TQ144I provides 84 user I/O pins, but pin count does not guarantee that every bank supports every I/O standard. Terminate high-speed nets according to the implemented interface, control clock skew, and avoid routing sensitive signals beneath sources of switching noise.
Do not treat same-footprint IGLOO2 ordering codes as automatically interchangeable. Before replacing the M2GL010-TQ144I, compare configuration compatibility, temperature grade, qualification, supply limits, and the exact package drawing. Program a known-good bitstream and validate reset, configuration, and JTAG behavior on the assembled board rather than relying on package dimensions alone.
معلومات الامتثال
The manufacturer product information does not establish the device-specific compliance status in the cited material. AEC-Q100 is not applicable because the M2GL010 is an FPGA rather than an automotive-qualified device category.
