Analog Devices

MAX3232EETE+T - 3V to 5.5V, 1Mbps RS-232 | Analog Devices

MPN: MAX3232EETE+T ✓ نشط
3.0V to 5.5V Vdss 10nA Id 16-TQFN, 5mm x 5mm Package
الحد الأدنى للطلب: 1 |

MAX3232EETE+T نظرة عامة

Analog Devices MAX3232EETE+T is a dual-channel true RS-232 transceiver with two drivers, two receivers, a 3.0V to 5.5V supply range, operation up to 1Mbps, and ±15kV IEC ESD protection, housed in a 16-pin TQFN package with an exposed pad. The MAX3232E family also supports shutdown current down to 10nA, making it suitable for power-constrained serial-interface systems.

A true RS-232 transceiver is an interface IC that translates logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into digital logic levels. In the product hierarchy, the MAX3232EETE+T is a dual RS-232 transceiver, an RS-232 interface IC, a line-driver and receiver device, and a power-management-aware interface component. Its integrated dual charge pump generates the bipolar voltage required by RS-232 transmitters without a separate negative supply.

The principal features are low-power operation, ±15kV ESD protection, true RS-232 compliance, and a 3.0V to 5.5V operating range. Two transmit channels and two receive channels support full-duplex serial links. A shutdown function reduces supply demand to as little as 10nA, while the Analog Devices MAX3232E product page identifies production availability and operation up to 1Mbps for this family.

Internally, the device combines two line drivers, two line receivers, and a dual charge-pump circuit. The charge-pump design supports true RS-232 signal levels while operating from a single positive supply. According to the Analog Devices MAX3232E datasheet, the MAX3232E is pin, package, and functionally compatible with the industry-standard MAX232, giving designers a familiar interface arrangement when moving between suitable implementations.

Typical uses include industrial serial-port controllers, USB-to-RS-232 adapters, embedded data acquisition systems, POS terminals, instrumentation, and legacy peripheral connectivity. The device is especially useful when both bidirectional communication and low standby consumption are required in a compact surface-mount design.

PCB design should keep charge-pump capacitors and connector-side ESD protection close to their associated pins. Because a TQFN exposed pad requires careful thermal and layout treatment, follow the manufacturer's land pattern and thermal-via guidance rather than treating the pad as an optional connection.

This product summary combines manufacturer specifications, ordering information, package details, and application-focused engineering guidance with a compatibility comparison for engineers evaluating RS-232 transceivers for industrial, embedded, and low-power serial-interface designs.

بدائل مباشرة لـ MAX3232EETE+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX3232EETE+T (نفس عامل الشكل والبصمة) — يختلف في ESD Protection, Maximum Data Rate, Number of Drivers, Number of Receivers, Package.

Analog Devices
ESD Protection: ±15 kV
Maximum Data Rate: 1 Mbps
Number of Drivers: 2
قارن مع MAX3232EETE+T →

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

MAX3232EETE+T المواصفات

Product Type Dual RS-232 transceiver
Number of Drivers 2 channels
Number of Receivers 2 channels
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
TI-Reported Data Rate 250kbps
ESD Protection ±15kV IEC
Shutdown Supply Current 10nA
Charge Pump Dual charge-pump circuit
Transceiver Configuration 2/2 full RS-232
العلبة 16-TQFN, 5mm x 5mm
Package Type TQFN with exposed pad
نوع التركيب Surface mount

دليل تكوين أطراف MAX3232EETE+T tqfn with exposed pad

تكوين الأطراف لـ MAX3232EETE+T (حزمة tqfn with exposed pad). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة tqfn with exposed pad لـ MAX3232EETE+T

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3232EETE+T.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX3232EETE+T مناسب لـ 6 التطبيقs: Industrial Serial Port Interface, USB-to-RS-232 Adapter, Data Acquisition and Instrumentation, Point-of-Sale Terminal, Low-Power Embedded System, Legacy Peripheral Connectivity.

🏭

Industrial Serial Port Interface

The MAX3232EETE+T fits industrial serial-port designs that require two transmit and two receive channels without a negative supply. Its 3.0V to 5.5V operating range supports both 3.3V and 5V control electronics, while the internal dual charge pump produces the bipolar voltages required by a true RS-232 link. The two-driver, two-receiver arrangement is well suited to asynchronous communication between a controller and two peripheral ports. The ±15kV IEC ESD rating strengthens the connector-side design, although the complete system still requires correct cable routing and protection practices.

🔧

USB-to-RS-232 Adapter

The MAX3232EETE+T can provide the connector-side RS-232 interface in a compact USB-to-serial adapter. Its two transmitters and two receivers support a full-duplex RS-232 connection, and its single 3.0V to 5.5V supply simplifies interfacing with modern 3.3V USB controllers. The low shutdown current is valuable when a portable adapter must reduce consumption while disconnected. The TQFN footprint also supports compact implementations, provided the exposed pad receives the land pattern and thermal treatment specified by the manufacturer.

🖥️

Data Acquisition and Instrumentation

The MAX3232EETE+T is appropriate for instrument and data-acquisition equipment that must exchange RS-232 commands and measurements with a host computer. The 2/2 channel arrangement supports bidirectional command, response, and status traffic without allocating excess drivers or receivers. Its true RS-232 interface removes the need for a separate negative supply, while operation up to 1Mbps provides useful link margin for short industrial cables. When connecting to external equipment, place the interface close to the DB9 or terminal connector and maintain the component-ground relationship required for reliable signaling.

🏭

Point-of-Sale Terminal

The MAX3232EETE+T can serve as the RS-232 interface in point-of-sale terminals, receipt printers, scales, and customer displays. Two transmitters and two receivers allow the terminal controller to manage more than one legacy peripheral while keeping the interface compact. The 3.0V to 5.5V supply range is useful for mixed-voltage embedded platforms, and shutdown current down to 10nA helps limit standby demand between transactions. Designers should account for ground potential differences between connected peripherals by following the RS-232 grounding and shielding recommendations in the system documentation.

🧩

Low-Power Embedded System

The MAX3232EETE+T suits embedded controllers that occasionally communicate through RS-232 but must minimize power between transactions. Its shutdown current can reach 10nA, allowing the interface to remain on the board while the surrounding system is idle. The device operates from 3.0V to 5.5V and needs no external negative rail because its dual charge pump generates the required RS-232 voltages. This makes the TQFN part particularly attractive for compact embedded equipment, although system leakage, pull resistors, and connected peripheral behavior must also be included in overall standby analysis.

🔧

Legacy Peripheral Connectivity

The MAX3232EETE+T allows modern controllers to communicate with legacy RS-232 printers, scanners, test equipment, and service ports. Its true RS-232 drivers and receivers provide the voltage-level translation required between CMOS logic and the older interface. A 2/2 channel count is sufficient for simultaneous command and data paths on many peripherals, while the 1Mbps family rating supports high-speed short-distance links. The key design consideration is selecting a replacement or alternate package carefully, because the 16-pin TQFN land pattern is not interchangeable with 16-pin TSSOP implementations.

What are the key specifications of MAX3232EETE+T that engineers should know?
The MAX3232EETE+T is a 2/2 dual true RS-232 transceiver with a 3.0V to 5.5V supply range, operation up to 1Mbps, ±15kV IEC ESD protection, and shutdown current down to 10nA. According to the Analog Devices MAX3232E datasheet, it combines two line drivers, two line receivers, and a dual charge-pump circuit in a 16-pin TQFN package. These specifications make it appropriate for compact, full-duplex RS-232 links requiring single-supply operation and low standby consumption.
Where to download the MAX3232EETE+T datasheet PDF?
The official MAX3232EETE+T technical information is available from the Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. The page provides the manufacturer datasheet, ordering information, product selection details, and supporting documentation. Use the TQFN package drawing and pin-description table in that datasheet when assigning PCB land patterns and connector protection components. The target orderable suffix identifies the tape-and-reel shipment form of MAX3232EETE+.
Where can I find the MAX3232EETE+T pinout?
The MAX3232EETE+T pinout is defined by the Analog Devices MAX3232E datasheet for its 16-pin TQFN package. Start with the package drawing and pin-description table to identify the driver outputs, receiver inputs, charge-pump capacitor pins, supply connections, ground pins, and exposed thermal pad. Assign PCB tracks directly from that table because the exposed pad also participates in thermal dissipation and must follow the manufacturer land pattern.
What is the operating voltage of MAX3232EETE+T?
The MAX3232EETE+T operates from a 3.0V to 5.5V supply. According to the Analog Devices MAX3232E product page, this voltage range supports both conventional 5V and 3.3V system rails. Designers should verify that the external charge-pump capacitors and interface circuit use components appropriate for the selected rail and that the connector-side RS-232 levels are generated from the internal dual charge pump rather than from a negative external supply.
Is MAX3232EETE+T suitable for industrial serial communication?
The MAX3232EETE+T is suitable for industrial RS-232 links that require two transmit and two receive channels, ±15kV IEC ESD protection, and low-power shutdown. The Analog Devices MAX3232E datasheet identifies the device as a true RS-232 transceiver, while the manufacturer product page states production status and operation up to 1Mbps. Industrial qualification requirements should still be checked for the complete system because the device's stated operating-temperature range is not published on the product page.
What is the difference between MAX3232EETE+T and MAX3232EETE+?
The MAX3232EETE+T is the tape-and-reel ordering form of MAX3232EETE+, with the same 16-pin TQFN electrical package and core RS-232 transceiver function. The suffix change concerns shipment packaging rather than the pinout or operating specifications. Because reel-code and packaging variants are not distinct drop-in alternatives, engineers should treat the two orderable names as equivalent for circuit design while preserving the exact suffix required by their bill of materials and assembly process.
What is the best drop-in replacement for MAX3232EETE+T?
No independently verified drop-in replacement with the same 16-pin TQFN footprint and pin-to-pin compatibility was identified for MAX3232EETE+T. The Analog Devices MAX3232E family is stated to be pin, package, and functionally compatible with the industry-standard MAX232, but that general compatibility statement does not establish that a specifically identified cross-manufacturer part is a drop-in replacement in this package. A replacement should therefore be approved only after comparing its 16-pin TQFN land pattern, pin functions, electrical ratings, and supply range.
When should I choose MAX3232EETE+T over a wider RS-232 transceiver?
Choose MAX3232EETE+T when the design needs exactly two RS-232 transmitters and two receivers, a single 3.0V to 5.5V supply, and low shutdown current. Wider devices add unused channels and may require different enable, shutdown, or status-pin arrangements. The MAX3232EETE+T is therefore a focused choice for compact full-duplex links, although its 2/2 channel count means that designs requiring three or more drivers or five receivers should evaluate a larger transceiver family.
Is MAX3232EETE+T the same as MAX3232EUE+T?
No. The MAX3232EETE+T uses a 16-pin TQFN package, while the MAX3232EUE+T uses a 16-pin TSSOP package. Although both belong to the MAX3232E family and provide dual true RS-232 operation, their physical land patterns are different. The MAX3232EUE+T is therefore not a drop-in replacement for the MAX3232EETE+T because its pins and exposed-pad arrangement cannot be soldered onto the TQFN footprint without PCB changes.
How much power does MAX3232EETE+T use in shutdown?
The MAX3232EETE+T can reduce supply current to as little as 10nA in shutdown. According to the Analog Devices MAX3232E product page, the MAX3232E family includes low-power shutdown specified down to 10nA. This is useful in battery-operated or intermittently connected systems where the serial interface must remain present on the board but consume negligible current while the host is inactive. Verify the exact shutdown-entry method and timing in the manufacturer pin and timing descriptions before relying on the low-current figure.
Where can I buy MAX3232EETE+T and check current stock?
Use the Request a Quote form on this page to ask for MAX3232EETE+T availability, current lead time, and a quotation for the exact +T orderable suffix. The suffix identifies the tape-and-reel shipment form, so it should be quoted separately from any leaded, cut-tape, or other packaging code. Stock status can change rapidly, and a request tied to the exact MPN helps purchasing confirm the correct package, quantity, and production lifecycle position.
What is the lead time for MAX3232EETE+T?
The current lead time for MAX3232EETE+T should be requested through the Request a Quote form on this page. Lead time depends on the quantity, package form, and current manufacturer allocation status, and an unconfirmed stock message should not be treated as a firm availability statement. Because MAX3232EETE+T is the +T orderable form, include that exact suffix in the request to avoid receiving a quotation for the same electrical device in a different shipment format.
What is the price of MAX3232EETE+T?
The current commercial price for MAX3232EETE+T is obtained through the Request a Quote form on this page. The form allows purchasing to confirm the exact +T tape-and-reel orderable code, required quantity, and current market position without relying on a stale list price. For engineering comparisons, the important product facts are the 2/2 channel count, 3.0V to 5.5V supply range, 1Mbps family rating, ±15kV IEC ESD protection, and TQFN footprint.
Is MAX3232EETE+T in stock?
Current MAX3232EETE+T stock should be confirmed through the Request a Quote form on this page using the complete MPN MAX3232EETE+T. The manufacturer identifies the MAX3232E family as production, but live inventory at distributors can vary by region and quantity. A purchasing response should also confirm the tape-and-reel packaging represented by the +T suffix, because the electrical MAX3232EETE+ device may be listed under several different shipment or packing codes.
What RS-232 standard does MAX3232EETE+T meet?
The MAX3232EETE+T provides a true RS-232 interface compatible with the TIA/EIA-232-F requirements identified in the manufacturer documentation. According to the Analog Devices MAX3232E datasheet, the device interfaces an asynchronous communication controller with a serial-port connector through two drivers and two receivers. Its integrated dual charge pump generates the required bipolar RS-232 levels from one positive supply, while ±15kV IEC ESD protection improves robustness at the serial connector pins.

بيانات مرجعية هندسية لـ MAX3232EETE+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX3232EETE+T when a design requires exactly two RS-232 transmitters and two receivers, operation from a 3.0V to 5.5V rail, and the compact 16-pin TQFN footprint. It is particularly suitable for industrial controllers, compact USB-to-serial adapters, embedded equipment, and legacy peripheral interfaces that benefit from the MAX3232E family's low shutdown current and integrated dual charge pump. MAX3232EUE+T serves the same general transceiver function but uses a 16-pin TSSOP package, so it is preferable only when the existing PCB uses that land pattern. MAX3232EETE+ is the non-+T orderable form of the same core device and should be selected according to the assembly and shipment format required by the BOM. Wider MAX3232 and MAX3243-family devices are better when additional drivers, receivers, enable controls, or status functions are required. Always verify the complete pin description, exposed-pad connection, capacitor placement, cable-side protection, and operating-temperature requirements before releasing a production layout.

المقارنة مع البدائل

المعامل هذا المنتج
Package 16-TQFN, 5mm x 5mm
Brand Analog Devices
Transceiver Configuration 2 drivers / 2 receivers
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV IEC
Shutdown Supply Current 10nA
Charge Pump Dual charge-pump circuit
Orderable Shipment Form +T tape-and-reel form

أبرز الفروقات

  • Provides a complete 2/2 true RS-232 interface from one positive supply (مقابلMAX3232EUE+T)
  • Supports low-power system states (مقابلMAX3232EUE+T)
  • Combines two drivers, two receivers, and dual charge pumps in one device (مقابلMAX3232EETE+)

ملاحظات التصميم

Place the MAX3232EETE+T charge-pump capacitors close to their designated pins and use the shortest practical return paths. The Analog Devices MAX3232E datasheet's capacitor values and layout should be followed rather than substituting similarly sized parts without checking DC-bias derating. Keep the TQFN exposed-pad land free of conflicting copper where the manufacturer pattern specifies thermal-via clearance, and connect the pad to the required ground reference.

Do not treat MAX3232EETE+T as interchangeable with MAX3232EUE+T merely because both contain 16 pins. The TQFN version has a 5mm x 5mm exposed-pad land pattern, whereas the TSSOP version uses a different lead geometry. Also confirm whether the required 1Mbps or 250kbps system rating applies to the specific manufacturer and operating conditions before selecting the device for a long cable or noisy industrial environment.

Route the RS-232 connector-side nets away from clock, switching-regulator, and high-current return paths. The ±15kV IEC protection rating describes the device's ESD capability, not complete immunity for the assembled product; use suitable cable protection and chassis-ground strategy where exposed connectors are required. High-speed transition currents in the charge-pump section can couple into sensitive circuitry, so preserve the manufacturer's recommended grounding and keep analog or reference sections spatially separate.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer documentation identifies ±15kV IEC ESD protection, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance for this orderable MPN.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX3232EETE+T datasheet MAX3232EETE+T pinout MAX3232EETE+T datasheet pdf MAX3232EETE+T equivalent MAX3232EETE+T replacement MAX3232EETE+T cross reference MAX3232EETE+T vs MAX3232EUE+T MAX3232EETE+T price MAX3232EETE+T stock Analog Devices MAX3232EETE+T MAX3232EETE+T TQFN-16 footprint MAX3232EETE+T RS-232 transceiver

المكونات والمصطلحات ذات الصلة

Analog Devices MAX3232EETE+T MAX3232EETE+ MAX3232EUE+T MAX3232E RS-232 transceiver RS-232 interface IC line driver line receiver dual charge pump TIA/EIA-232-F IEC ESD protection RoHS REACH AEC-Q100 TQFN-16 QFN package family surface-mount package full-duplex serial communication industrial serial interface USB-to-RS-232 adapter data acquisition shutdown current
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر