MC9S08QE16CLD - 50MHz 8-Bit MCU, 16KB Flash | NXP
MPN: MC9S08QE16CLD ✗ انتهى عمره الإنتاجيMC9S08QE16CLD نظرة عامة
An S08 microcontroller is an embedded-control processor designed for compact, cost-sensitive products that coordinate sensors, actuators, human-interface elements, and communications peripherals. Within the product hierarchy, the S08 belongs to the 8-bit microcontroller and embedded-processor classes. The MC9S08QE16CLD combines an HCS08 central processing unit, 16KB of Flash memory, 1KB of RAM, an LCD driver, and low-power modes in one device. It is also positioned within NXP's Flexis family of 8-bit and 32-bit pin-compatible controllers.
Key features include 34 general-purpose I/O pins and an 8-bit CPU capable of operating at up to 50MHz. Integrated communication interfaces include I2C, LIN, SCI, and SPI, supporting common embedded-control links. The device also provides PWM, a watchdog timer, and low-voltage detection functions. Its 16KB Flash memory supports programmed application code, while the 1KB SRAM provides working memory for control logic and peripheral data handling. A dedicated LCD driver simplifies designs using simple character or segment displays without requiring a separate display controller.
The S08 core uses an HCS08-compatible instruction architecture optimized for embedded applications. The high clock rate can shorten execution time in control loops, while low-power operating modes help conserve energy in battery-powered equipment. The integrated LCD interface is particularly important for products in which board area and component count are constrained. Serial peripherals allow the MCU to communicate with sensors, external transceivers, memory devices, and service interfaces without requiring additional bus controllers.
Typical applications include small appliances, battery-powered instruments, industrial control modules, meters, programmable keypads, sensor nodes, and compact display controllers. For each of these designs, the combination of 16KB Flash, 1KB RAM, 34 I/O pins, and an integrated LCD driver provides enough integration to simplify the design while preserving several communication options. The 44-LQFP package also remains inspectable and accessible for conventional through-hole-style board assembly, although the exposed lead geometry requires careful PCB layout.
Designers should confirm the complete pin assignment, peripheral multiplexing, voltage limits, and clock configuration in the manufacturer datasheet before layout. The 34 available I/O pins do not all operate independently at every peripheral setting, so functions such as SPI, SCI, timers, and the LCD interface can constrain pin allocation. Firmware should also be reviewed against the S08QE16 reference manual to confirm interrupt behavior, watchdog settings, memory organization, and low-power transitions.
This product record combines the manufacturer lifecycle status, core specifications, package details, connectivity features, sourcing guidance, and the limited drop-in alternatives that can be supported without inventing unverified replacements. It also provides practical selection notes for engineers determining whether the 16KB S08QE16 variant or the higher-memory pin-compatible QE32 family member is appropriate for an existing 44-LQFP design.
بدائل مباشرة لـ MC9S08QE16CLD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC9S08QE16CLD (نفس عامل الشكل والبصمة) — يختلف في Package, RAM.
MC9S08QE32CLD
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC9S08QE16CLD الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit S08QE microcontroller |
| Processor Core | HCS08 / S08 |
| أقصى تردد للساعة | 50MHz |
| CPU Data Width | 8 bit |
| Program Memory | 16KB Flash (16K x 8) |
| RAM | 1KB |
| Number of I/O Pins | 34 |
| جهد التغذية التشغيلي | 2.5V or 3.3V |
| Integrated Display Controller | LCD driver |
| Serial Interfaces | I2C, LIN, SCI, and SPI |
| Embedded Peripherals | PWM, watchdog timer, and low-voltage detection |
| العلبة | 44-LQFP (10mm x 10mm) |
| نوع التركيب | Surface mount |
| نطاق درجة حرارة التشغيل | -40C to +85C |
| Product Series | S08QE |
| Product Family | Flexis series |
| Program Memory Type | Flash |
دليل تكوين أطراف MC9S08QE16CLD 44-lqfp (10mm x 10mm)
تكوين الأطراف لـ MC9S08QE16CLD (حزمة 44-lqfp (10mm x 10mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S08QE16CLD.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC9S08QE16CLD مناسب لـ 6 التطبيقs: Battery-Powered Display Instruments, Industrial Control Modules, Small Appliance Controllers, Metering and Data-Collection Devices, Battery-Powered Sensor Nodes, Programmable Keypads and HMIs.
Battery-Powered Display Instruments
The MC9S08QE16CLD fits compact, battery-operated instruments because it combines a 50MHz S08 CPU, 16KB of Flash, 1KB of RAM, and an integrated LCD driver in one 44-LQFP device. The LCD controller reduces the need for a separate display-driver IC, while the low-power operating modes support reduced energy use between user interactions. I2C, LIN, SCI, and SPI provide flexible links to sensors and service electronics. The main design consideration is allocating multiplexed LCD and serial functions among the 34 I/O pins while maintaining the intended 2.5V or 3.3V operating level.
موصى به
Industrial Control Modules
The MC9S08QE16CLD can serve as the local controller in a compact industrial module that coordinates digital inputs, outputs, and serial sensors. Its 34 I/O pins provide substantial board-level connectivity, while PWM and the watchdog timer support actuator control and reliable background supervision. The I2C, LIN, SCI, and SPI interfaces allow the controller to connect to industrial transceivers, memory, and service connectors. The 16KB Flash footprint is most appropriate when the control program remains stable; the same-family MC9S08QE32CLD offers additional memory headroom for expanded diagnostics or production firmware variants.
موصى به
Small Appliance Controllers
A small appliance control board can use the MC9S08QE16CLD to coordinate buttons, indicators, relays, and communication interfaces within a single 8-bit MCU. Its 50MHz maximum clock rate supports responsive sequential control, and the integrated LCD driver is useful for products with a simple status display. SCI and I2C can connect to external sensors or modules, while PWM supports motor, buzzer, or dimming functions when the associated peripheral multiplexing permits. Designers should reserve pins for debugging and programming, verify reset behavior, and confirm that 16KB of Flash remains sufficient for the complete production firmware.
موصى به
Metering and Data-Collection Devices
The MC9S08QE16CLD is appropriate for compact metering equipment that gathers readings, drives a local display, and exposes data through a serial interface. Its 1KB RAM can hold acquisition buffers, calibration coefficients, and control state, while the 16KB Flash stores application code and fixed parameters. The integrated LCD driver reduces display-controller overhead, and SCI or SPI can connect to a measurement front end. The main engineering task is balancing memory, peripheral multiplexing, and I/O allocation. If firmware growth threatens the 16KB limit, MC9S08QE32CLD provides a pin-compatible route with 32KB of Flash.
موصى به
Battery-Powered Sensor Nodes
The MC9S08QE16CLD can form the core of a compact sensor node that samples an external sensor, evaluates the result, and communicates over a low-power serial link. Its low-power modes are useful for duty-cycled operation, and the 16KB Flash and 1KB RAM are sufficient for many straightforward sensing and control routines. I2C and SPI suit short-range sensor connections, while LIN or SCI can support a wider system bus. Power-budget work must account for MCU operating modes, external sensor load, and communications activity. A pin-compatible MC9S08QE32CLD can be evaluated when local buffering or more elaborate firmware is required.
موصى به
Programmable Keypads and HMIs
The MC9S08QE16CLD suits compact human-machine interfaces built around a simple keypad and display. The S08 CPU can scan inputs, manage display content, and implement product-specific interaction logic without requiring a higher-cost application processor. The integrated LCD driver supports display-oriented designs, and the available serial interfaces permit connection to external accessories or a host. PWM can provide visual feedback or buzzer control, while the watchdog timer helps recover the interface if firmware becomes unresponsive. Because several functions share pins, the board layout should be derived from the manufacturer pin table and should not assume all 34 I/O positions remain available simultaneously.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC9S08QE16CLD — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC9S08QE32CLD |
|---|---|---|
| Package | 44-LQFP (10mm x 10mm) | 44-LQFP (10mm x 10mm) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Processor Core | 8-bit HCS08 / S08 | 8-bit HCS08 / S08QE family |
| Maximum Clock Frequency | 50MHz | 50MHz |
| Program Memory | 16KB Flash | 32KB Flash |
| RAM | 1KB | 1KB |
| Number of I/O Pins | 34 | Up to 40 in the S08QE family |
| Integrated Display Controller | LCD driver | LCD driver |
| Serial Interfaces | I2C, LIN, SCI, and SPI | I2C, LIN, SCI, and SPI |
| Operating Supply Voltage | 2.5V or 3.3V | 2.5V or 3.3V |
| Embedded Peripherals | PWM, watchdog timer, and low-voltage detection | PWM, watchdog timer, and low-voltage detection |
أبرز الفروقات
- Lower memory requirement within the pin-compatible S08QE family (مقابلMC9S08QE32CLD)
- Integrated display and serial resources for compact embedded products (مقابلMC9S08QE32CLD)
- Clear distinction between firmware capacity and software compatibility (مقابلMC9S08QE32CLD)
ملاحظات التصميم
Route the 44-LQFP footprint exactly to the manufacturer package drawing and preserve access to programming and debug signals. Assign LCD, SPI, SCI, LIN, timer, and general-purpose I/O functions from the pin-description table because peripheral multiplexing can change which pins are available. Keep the exposed ground and supply connections on a continuous plane, and place decoupling capacitance close to the appropriate supply pins according to the recommended layout in the manufacturer datasheet.
Design the supply network for either 2.5V or 3.3V operation only after confirming which voltage mode applies to the selected clock and peripheral configuration. Validate startup, brownout, and low-voltage behavior using the watchdog timer and low-voltage-detection features. For battery-powered products, calculate average energy using MCU active current, idle current, wake events, LCD load, and external sensor activity rather than considering processor current alone.
Do not treat the shared 44-LQFP package as proof that every peripheral assignment is interchangeable. Before replacing MC9S08QE16CLD with MC9S08QE32CLD, compare clock settings, interrupt vectors, LCD channels, serial channels, timer resources, and low-power modes in the manufacturer reference manual. Also verify that the application still fits within the target device's memory map and that production programming and test fixtures support the selected suffix.
Separate sensitive analog or sensor routing from LCD edges, switching nodes, and fast serial signals when the board layout permits. Although the MC9S08QE16CLD is primarily a control-oriented 8-bit MCU, display and communication signals still require stable references and short return paths. Use a continuous ground plane, avoid long stubs, and confirm connector-driven transients against the input ratings in the manufacturer documentation.
معلومات الامتثال
The manufacturer product information identifies the MC9S08QE16CLD as end of life but does not establish the requested environmental or automotive compliance statuses.