MCP3565R-E/SFX - 24-Bit 153.6 kSPS Delta-Sigma ADC | Microchip
MPN: MCP3565R-E/SFX ✓ نشطMCP3565R-E/SFX نظرة عامة
A delta-sigma ADC is a mixed-signal integrated circuit that converts an analog input into a high-resolution digital result by using oversampling, digital filtering, and noise shaping. Within the ADC and data-converter hierarchy, this device combines a 24-bit conversion engine with programmable gain, programmable oversampling, and a digital interface for transferring measurements to a microcontroller or embedded processor.
The MCP3565R integrates an internal voltage reference and oscillator, reducing the number of external precision components required in a measurement system. It also includes an internal temperature sensor and burnout-sensor detection. According to the Microchip MCP3565R Data Sheet 20006401C, the converter supports oversampling ratios up to 98,304 and gain settings up to 64×, allowing the conversion speed and noise performance to be balanced for the intended application.
An internal sequencer supports scan-mode conversion sequences across multiple monitor channels, while a 24-bit timer can organize recurring conversion loops without requiring continuous microcontroller intervention. This architecture is useful when the host processor must sample several analog nodes while maintaining a defined measurement sequence. The target MCP3565R-E/SFX operates from 3 V, matching low-voltage sensor, industrial instrumentation, and embedded measurement systems.
Typical uses include precision bridge and sensor acquisition, process-control monitoring, laboratory instrumentation, medical measurement interfaces, and battery-powered industrial equipment. The 153.6 kSPS maximum rate supports relatively fast conversions, while the 24-bit resolution and selectable oversampling favor applications requiring fine full-scale resolution rather than only high throughput.
PCB implementation requires careful treatment of the analog input, reference, supply, and digital interface connections. Place the input network and decoupling capacitors close to the device, maintain a quiet return path beneath analog circuitry, and follow the manufacturer’s package and layout guidance to preserve conversion performance.
This page combines manufacturer specifications, package information, engineering use cases, comparison guidance, and practical layout considerations. It also distinguishes verified drop-in replacements from related devices that differ in package or ordering code, helping engineers make a package-safe replacement decision before committing a design to the 2 mm by 2 mm MCP3565R-E/SFX footprint.
بدائل مباشرة لـ MCP3565R-E/SFX — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلMCP3565R-E/SFX الحدود القصوى والخصائص الكهربائية
| Converter Type | 24-bit delta-sigma ADC |
| Maximum Data Rate | 153.6 kSPS |
| Input Configuration | 1 differential channel or 2 single-ended channels |
| جهد التغذية | 3 V |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Oversampling Ratio | Up to 98,304 |
| Programmable Gain | Up to 64× |
| Conversion Sequencer | SCAN mode with multiple monitor channels |
| Internal Timer | 24-bit |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Integrated |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C |
| العلبة | 12-UQFN, 2 mm × 2 mm |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MCP3565R-E/SFX 12-uqfn, 2 mm × 2 mm
تكوين الأطراف لـ MCP3565R-E/SFX (حزمة 12-uqfn, 2 mm × 2 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP3565R-E/SFX.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCP3565R-E/SFX مناسب لـ 6 التطبيقs: Precision Bridge Sensor Acquisition, Industrial Process Monitoring, Medical and Diagnostic Instrumentation, Laboratory Data Acquisition, Battery-Powered Sensor Hubs, Embedded Control and Monitoring.
Precision Bridge Sensor Acquisition
The MCP3565R-E/SFX suits low-level bridge measurements where resolution, programmable gain, and adjustable oversampling are more important than maximum conversion throughput. A differential input can receive the bridge signal while rejecting common-mode voltage, and gain can be selected up to 64× according to the Microchip MCP3565R Data Sheet 20006401C. The 24-bit resolution and oversampling ratios up to 98,304 can support fine digital scaling when the bridge is slow and noise-limited. The 3 V supply and 2 mm by 2 mm UQFN-12 package also help compact instrumentation, although the final excitation, gain, filter, and reference strategy must be validated against the required bridge error and settling time.
موصى به
Industrial Process Monitoring
The MCP3565R-E/SFX is appropriate for industrial monitoring systems that digitize several slowly changing process signals with limited board area. Its SCAN mode and internal sequencer can organize conversion sequences across monitor channels, while the integrated 24-bit timer supports recurring conversion loops without continuous host intervention. The converter supports one differential or two single-ended channels, 24-bit resolution, and programmable gain up to 64×. These functions can reduce the component count in compact measurement modules. For field equipment, the -40 °C to +125 °C specification supports a broad temperature range, while analog trace layout and grounding remain important for preserving measurement quality.
موصى به
Medical and Diagnostic Instrumentation
The MCP3565R-E/SFX can serve as the analog measurement front end in compact medical and diagnostic equipment when the application requires high resolution and flexible conversion timing. Its 24-bit delta-sigma architecture supports low-level differential or single-ended sensor signals, while programmable gain up to 64× and oversampling up to 98,304 allow the acquisition profile to be adapted to slower diagnostic waveforms. The integrated voltage reference, oscillator, and temperature sensor reduce the number of discrete support components. The 3 V operating supply and 2 mm by 2 mm footprint aid miniaturization, but system designers must also evaluate isolation, patient-safety circuitry, calibration, and applicable medical requirements outside the ADC itself.
موصى به
Laboratory Data Acquisition
The MCP3565R-E/SFX fits laboratory data-acquisition modules that need a configurable balance between sample rate and resolution. Its maximum 153.6 kSPS rate supports faster measurements, while selectable oversampling and gain allow slower channels to be optimized for low noise. One differential channel or two single-ended channels provide flexibility for grounded or balanced sensor sources, and the internal reference and oscillator reduce external support circuitry. The integrated SCAN-mode sequencer and 24-bit timer are useful for repeatable multi-channel acquisition. Its compact UQFN-12 footprint can free board area for interfaces and isolated power systems, although the small package requires careful assembly and analog-layout practices.
موصى به
Battery-Powered Sensor Hubs
The MCP3565R-E/SFX is useful in compact battery-powered sensor hubs where every milliamp and cubic millimeter affects system architecture. The 3 V supply matches common embedded rails, while the integrated voltage reference, oscillator, temperature sensor, and burnout detection can reduce external component count. Oversampling can be selected according to the required noise performance, and the internal timer supports periodic measurement activity. The 2 mm by 2 mm UQFN-12 package minimizes board footprint. Designers should choose conversion settings that balance useful measurement bandwidth against average power consumption, account for startup behavior of the internal reference and oscillator, and isolate noisy digital or switching circuitry from sensitive analog inputs.
موصى به
Embedded Control and Monitoring
The MCP3565R-E/SFX can replace a collection of less integrated measurement functions around a microcontroller-based controller. Its internal sequencer supports SCAN-mode conversion sequences, the 24-bit timer can establish recurring conversion timing, and the integrated reference and oscillator lower peripheral count. Two single-ended inputs or one differential input support common embedded measurement arrangements. With 24-bit resolution and a maximum rate of 153.6 kSPS, the converter can address both control feedback and diagnostic monitoring. The 2 mm by 2 mm package assists dense control boards, while -40 °C to +125 °C operation covers industrial environments. Firmware must still configure data rate, gain, filter behavior, sequencing, and digital interface timing.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MCP3565R-E/SFX — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Brand | Microchip Technology |
| Package | 12-UQFN, 2 mm × 2 mm |
| Resolution | 24-bit |
| Maximum Data Rate | 153.6 kSPS |
| Input Configuration | 1 differential channel or 2 single-ended channels |
| Supply Voltage | 3 V |
| Oversampling Ratio | Up to 98,304 |
| Programmable Gain | Up to 64× |
| Integrated Features | Internal voltage reference, oscillator, temperature sensor, and burnout detection |
| Operating Temperature Range | -40 °C to +125 °C |
أبرز الفروقات
- High-resolution conversion with extensive internal oversampling (مقابلMCP3561R)
- Compact footprint for constrained embedded boards (مقابلMCP3561R)
- Integrated measurement and sequencing functions (مقابلMCP3565RT-E/SFX)
ملاحظات التصميم
Place the analog input, reference, and supply decoupling networks directly beside their associated MCP3565R terminals, following the manufacturer’s recommended application circuit and package drawing. Route sensitive input traces away from digital clock, serial-interface, and switching-regulator traces. A compact 12-UQFN, 2 mm × 2 mm package leaves little routing space, so complete the footprint, solder mask, paste, courtyard, and exposed-pad checks against the exact manufacturer drawing before fabrication.
Treat the analog input path as a precision measurement interface rather than a general-purpose digital connection. Use short traces, a continuous ground reference, and a quiet return path beneath the analog section. Select the input filter and gain in relation to the selected data rate and oversampling ratio; the device supports oversampling up to 98,304 and gain up to 64×, but each choice changes signal bandwidth, settling behavior, and noise performance. Confirm the final configuration using the manufacturer timing and digital-filter characteristics.
Do not treat MCP3565RT-E/SFX as an identical ordering string or assume that MCP3561R can replace the target on an existing board. The former has a different ordering suffix despite the same stated 12-UQFN, 2 mm × 2 mm family package, while MCP3561R is offered in larger packages. For any substitution, verify the exact pin map, exposed-pad connection, supply limits, interface timing, conversion settings, and package drawing instead of relying only on resolution and sample-rate similarity.
Use the manufacturer’s recommended supply-decoupling arrangement and separate sensitive analog returns from noisy power paths. Because the MCP3565R-E/SFX integrates a voltage reference, oscillator, temperature sensor, and burnout detection, power-supply quality affects several internal functions as well as the conversion result. Check startup sequencing, supply ramp behavior, and digital-interface levels in the final system. If adjacent circuitry includes a switching converter, increase separation and filtering only after confirming the ADC bandwidth and conversion timing requirements.
معلومات الامتثال
Compliance status was not stated in the reviewed manufacturer and distributor records and must be confirmed for the exact MCP3565R-E/SFX ordering code.