NXP Semiconductors

MKL24Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP

MPN: MKL24Z64VLK4 ✓ نشط
1.71 V to 3.6 V Vdss 80-pin FQFP/LQFP, 12 mm x 12 mm Package 48 MHz Speed 64 KB Memory
الحد الأدنى للطلب: 1 |

MKL24Z64VLK4 نظرة عامة

The NXP MKL24Z64VLK4 is a 32-bit Arm Cortex-M0+ Kinetis KL2 microcontroller operating up to 48 MHz, with 64 KB of embedded Flash memory, 8 KB of SRAM, and full-speed USB 2.0 connectivity. The device is offered in an 80-pin FQFP/LQFP package measuring 12 mm by 12 mm and is intended for compact, low-power embedded systems. Its operating supply range extends from 1.71 V to 3.6 V, with an industrial temperature range of -40 °C to +105 °C.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The MKL24Z64VLK4 belongs to the Kinetis KL2x family, which combines an Arm Cortex-M0+ processor with ultra-low-power design features and USB support. Its position within the broader hierarchy is Arm Cortex-M0+ embedded processor, 32-bit microcontroller, Kinetis MCU, and semiconductor. The KL2x family is positioned for low-power embedded applications requiring more connectivity than the earlier KL1x family.

Key device characteristics include 64 KB of Flash for firmware, 8 KB of SRAM for working data, operation up to 48 MHz, a 12-bit analog-to-digital converter, and full-speed USB. The 80-pin package provides access to the family’s analog, timing, communication, and general-purpose I/O resources. The 1.71 V to 3.6 V operating range supports low-voltage portable, industrial, and connected embedded equipment, while the -40 °C to +105 °C rating supports temperature-controlled industrial environments.

The Arm Cortex-M0+ core supports a compact instruction set and an event-driven architecture suited to control tasks, sensor monitoring, human-interface functions, and low-power background processing. Full-speed USB adds a practical path for connected peripherals, configuration tools, data logging, and firmware update workflows. Because the device combines USB and low-power operation, it can bridge host-device communication duties with embedded control rather than requiring a separate USB interface controller.

Typical applications include USB-connected sensor nodes, industrial condition-monitoring equipment, compact data loggers, USB human-interface devices, industrial control panels, and low-energy embedded systems. The 64 KB Flash capacity is appropriate for moderate firmware loads, and the 8 KB SRAM is sufficient for typical control loops and small data buffers. Designs requiring substantially larger application code, extensive graphics storage, or complex protocol stacks should assess whether another MCU in the Kinetis portfolio offers more memory.

When laying out the PCB, preserve the pin assignments and exposed-connection requirements defined by the manufacturer datasheet, especially for USB D+ and D− routing. Place USB differential traces as a controlled-impedance pair with minimal stubs and provide suitable decoupling near the power pins. Firmware development should use an NXP-supported toolchain and verify clock, reset, boot, and low-power configurations against the device reference manual before production.

This product page consolidates the confirmed MCU specifications, package and supply information, lifecycle status, family context, sourcing options, and design-oriented selection guidance. It also distinguishes the 80-pin target from the 64-pin MKL24Z64VFM4 package variant so engineers can avoid an invalid footprint substitution.

بدائل مباشرة لـ MKL24Z64VLK4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

MKL24Z64VLK4 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M0+ Microcontroller
Product Series Kinetis KL2
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
SRAM 8 KB
جهد التغذية التشغيلي 1.71 V to 3.6 V
ADC Resolution 12 bit
USB Controller Full-speed USB 2.0
Architecture Arm Cortex-M0+
Instruction Set Width 32 bit
العلبة 80-pin FQFP/LQFP, 12 mm x 12 mm
نوع التركيب Surface mount
درجة حرارة التشغيل -40 °C to +105 °C
Temperature Grade Industrial
Terminal Count 80 pins
Package Terminal Style Gull wing
Package Shape Square
حالة RoHS Compliant
Supply Form Tray

دليل تكوين أطراف MKL24Z64VLK4 square

تكوين الأطراف لـ MKL24Z64VLK4 (حزمة square). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة square لـ MKL24Z64VLK4

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MKL24Z64VLK4.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MKL24Z64VLK4 مناسب لـ 6 التطبيقs: USB Industrial Sensor Node, USB Data Logger, Industrial Condition Monitoring, USB Human-Interface Device, Low-Power Control Module, Portable Connected Instrument.

🏭

USB Industrial Sensor Node

The MKL24Z64VLK4 fits a compact USB-connected sensing node because it combines a 48 MHz Arm Cortex-M0+ core with 64 KB of Flash, 8 KB of SRAM, and full-speed USB 2.0. Firmware can acquire data through the 12-bit ADC, apply filtering and compensation, and expose results through a USB device interface without a separate communications controller. The 1.71 V to 3.6 V operating range also supports low-voltage portable and industrial instrumentation. Place the USB differential pair as a controlled-impedance route, keep D+ and D− closely coupled, and follow the manufacturer datasheet for decoupling, clock, and power-layout requirements.

🖥️

USB Data Logger

The MKL24Z64VLK4 can serve as the control and communications processor in a compact data logger that receives sensor updates, timestamps them, stores recent records, and transfers completed datasets over USB. Its 48 MHz Cortex-M0+ performance provides useful headroom for acquisition control and communication tasks, while 64 KB of Flash accommodates the application firmware. The 8 KB of SRAM is suitable for buffering and protocol state but should be checked against the largest USB transfer and logging workload. Use DMA-capable peripherals and shortest practical USB routing to reduce CPU loading and maintain predictable peripheral timing.

🏭

Industrial Condition Monitoring

The MKL24Z64VLK4 is suitable for industrial condition-monitoring equipment that samples vibration, temperature, or level signals and communicates measurements to a host. The 12-bit ADC supports analog sensing, and the 48 MHz Cortex-M0+ core can manage sampling control, digital filtering, event detection, and USB communication. Its industrial temperature rating of -40 °C to +105 °C is appropriate for many deployed environments, although enclosure heating and sensor accuracy remain system-level concerns. Keep analog inputs away from USB and switching traces, provide clean grounding, and validate ADC accuracy across the intended input range with the manufacturer electrical characteristics.

🔧

USB Human-Interface Device

The MKL24Z64VLK4 can implement a full-speed USB human-interface peripheral such as a control panel, configuration interface, keyboard, or custom operator device. The Arm Cortex-M0+ core can service USB transactions while dedicated I/O handles buttons, indicators, encoders, or display functions. The 80-pin package offers more peripheral routing options than the 64-pin family variant and is useful when the design needs several external signals. Firmware should use the device’s USB stack and documented endpoint configuration, and the PCB should use a short impedance-controlled USB route with appropriate series-termination placement specified by NXP.

⚡

Low-Power Control Module

The MKL24Z64VLK4 fits low-power embedded control modules that must sense inputs, execute control logic, and maintain optional USB connectivity. Its 1.71 V to 3.6 V supply range accommodates low-energy system rails, while 64 KB of Flash and 8 KB of SRAM are sufficient for compact supervisory firmware. The MCU can remain in low-power operating modes between measurement or service events, reducing energy use when USB is not active. Actual run-time and sleep-current performance depend on the selected clock configuration, enabled peripherals, regulator design, and I/O state, so those conditions should be evaluated using the manufacturer datasheet.

📱

Portable Connected Instrument

The MKL24Z64VLK4 is appropriate for a portable connected instrument that records measurements, responds to a host computer, and includes limited local controls. Its low-voltage operation supports battery-managed designs, while full-speed USB provides a direct wired interface for configuration, calibration data, and real-time results. The 48 MHz processor offers enough performance for responsive control and USB service tasks, and the 80-pin package provides a broad set of GPIO and peripheral options. Engineers should budget regulator headroom for the complete USB-enabled load, account for cable and connector behavior in EMC testing, and confirm enumeration requirements with the firmware architecture.

ملخص المنتجات الموصى بها

MKL24Z64VFM4 64-pin family alternative for designs that do not require the 80-pin footprint يُستخدم في: USB Industrial Sensor Node, USB Data Logger, Industrial Condition Monitoring, USB Human-Interface Device, Low-Power Control Module, Portable Connected Instrument
What is the MKL24Z64VLK4?
The MKL24Z64VLK4 is an active NXP Semiconductors 32-bit Arm Cortex-M0+ Kinetis KL2 microcontroller rated up to 48 MHz. It integrates 64 KB of Flash, 8 KB of SRAM, a 12-bit ADC, and full-speed USB 2.0 in an 80-pin 12 mm by 12 mm package. The NXP product page identifies the component as active and the manufacturer datasheet describes it for ultra-low-power embedded applications.
How much Flash and SRAM does the MKL24Z64VLK4 have?
The MKL24Z64VLK4 provides 64 KB of Flash memory and 8 KB of SRAM. The Flash stores the executable firmware and nonvolatile configuration data, while the SRAM supports stack space, real-time control variables, USB buffers, and other working data. According to the NXP product information and manufacturer datasheet, this memory combination suits compact embedded designs with moderate firmware complexity.
What is the operating voltage of MKL24Z64VLK4?
The MKL24Z64VLK4 operates from 1.71 V to 3.6 V. This low-voltage range supports energy-conscious embedded products that retain a 3.3 V rail or use a lower operating voltage where appropriate. The confirmed supply range appears on the NXP and distributor product listings, while the manufacturer datasheet provides the detailed operating-condition limits and power-consumption characteristics.
Does MKL24Z64VLK4 support USB?
Yes, the MKL24Z64VLK4 includes a full-speed USB 2.0 controller. According to the NXP product page, the Kinetis KL2x family adds full-speed USB OTG or crystal-less USB device capability to the low-power Kinetis architecture. This makes the MCU suitable for connected sensors, data loggers, configuration interfaces, and USB human-interface devices.
What is the maximum clock frequency of MKL24Z64VLK4?
The maximum CPU frequency of the MKL24Z64VLK4 is 48 MHz. According to the NXP manufacturer datasheet, this rate belongs to the Kinetis KL24 performance range and supports responsive control, event handling, and USB communication. Firmware developers should use clock configurations and timing parameters documented for the exact device rather than assuming timing from another Kinetis family member.
Where can I download the MKL24Z64VLK4 datasheet PDF?
The official MKL24Z64VLK4 datasheet is available through the NXP product page at https://www.nxp.com/part/MKL24Z64VLK4, where the Data Sheet document can be opened directly. The KL24 Sub-Family Data Sheet covers electrical characteristics, memory, peripherals, USB, clocking, and package information. Use the NXP copy as the authoritative source for design and production decisions.
Where can I find the MKL24Z64VLK4 pinout and package information?
The MKL24Z64VLK4 pinout is documented in the pin-configuration section and package drawings of the NXP manufacturer datasheet. The confirmed package is an 80-pin FQFP/LQFP measuring 12 mm by 12 mm, with a gull-wing terminal arrangement. Use the manufacturer pin table when assigning tracks, programming I/O functions, and checking USB, power, reset, clock, and analog connections.
Can MKL24Z64VFM4 replace MKL24Z64VLK4?
No, the MKL24Z64VFM4 is not a drop-in replacement for the MKL24Z64VLK4 because it uses a different package. Both are 48 MHz, 64 KB Flash Kinetis KL24 devices with 8 KB SRAM and USB, but the VFM4 is a 64-pin variant while the VLK4 has 80 pins. A PCB designed for the 80-pin VLK4 requires pin and footprint verification before considering the smaller VFM4.
What can replace the MKL24Z64VLK4 as a drop-in replacement?
No uniquely confirmed drop-in replacement is established for the MKL24Z64VLK4. A valid replacement must retain the 80-pin 12 mm by 12 mm footprint, pin functions, 1.71 V to 3.6 V supply range, 48 MHz performance class, 64 KB Flash, 8 KB SRAM, and USB requirements. The MKL24Z64VFM4 is functionally related but has 64 pins, so it is not a direct substitute.
MKL24Z64VLK4 vs MKL24Z64VFM4: which is better for a new design?
Choose the MKL24Z64VLK4 when an existing or planned board requires the 80-pin package and its complete I/O allocation. Choose the MKL24Z64VFM4 when its 64-pin package is sufficient and smaller board area is more important. Both provide 64 KB Flash, 8 KB SRAM, a 48 MHz Arm Cortex-M0+ core, and USB according to NXP’s family information, but their footprints are not interchangeable.
When should I choose the MKL24Z64VLK4 over a smaller Kinetis MCU?
Choose the MKL24Z64VLK4 when a design benefits from its 80-pin package, USB connectivity, 64 KB Flash, 8 KB SRAM, and operation across -40 °C to +105 °C. It is particularly appropriate for industrial sensing, monitoring, logging, and connected control products. Select a smaller package only after checking that every required GPIO, analog, timing, and communication signal remains available.
Is the MKL24Z64VLK4 suitable for industrial temperature applications?
Yes, the MKL24Z64VLK4 has an industrial operating-temperature range of -40 °C to +105 °C. The confirmed listing also identifies the package as an 80-terminal industrial-grade microcontroller. For deployed industrial equipment, designers should still verify startup behavior, brownout behavior, USB operating conditions, and peripheral performance over the complete system-temperature range using the manufacturer datasheet.
Where can I buy MKL24Z64VLK4 and check its current lead time?
Use the Request a Quote form on this page to request MKL24Z64VLK4 availability, current lead time, and order quantities. The NXP product page identifies the part as active, and distributor listings show the 80-pin tray configuration. Commercial confirmation should specify the exact MPN, quantity, shipment location, and whether individual or production-volume quantities are required.
What is the current price of MKL24Z64VLK4?
Use the Request a Quote form on this page for the current MKL24Z64VLK4 price and quantity availability. The structured pricing on this page is refreshed separately from technical documentation, and quoted price can vary with quantity, procurement schedule, and market conditions. Include the required MPN, annual usage, and target delivery date when requesting a quotation.
Is MKL24Z64VLK4 currently in stock?
The MKL24Z64VLK4 is listed as active by NXP, while individual distributor inventory levels can change quickly. Use the Request a Quote form on this page to confirm current stock and a committed lead time for the exact 80-pin tray orderable part. For production planning, request a schedule that covers your forecast rather than relying on a momentary inventory count.

بيانات مرجعية هندسية لـ MKL24Z64VLK4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MKL24Z64VLK4 when the PCB footprint is specifically based on the 80-pin, 12 mm by 12 mm package and the design benefits from its larger I/O allocation. Its 48 MHz Arm Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, 12-bit ADC, full-speed USB 2.0, and -40 °C to +105 °C industrial temperature range suit connected industrial sensors, portable instruments, loggers, and control modules. The MKL24Z64VFM4 offers the same fundamental memory, core, and USB classes in a smaller 64-pin package, making it attractive for new space-constrained designs, but it is not a drop-in replacement for an existing VLK4 layout. No other directly interchangeable option was confirmed. Before selecting either device, verify USB routing requirements, ADC performance, supply limits, peripheral availability, firmware support, and the complete manufacturer pin configuration.

المقارنة مع البدائل

المعامل هذا المنتج
Package 80-pin FQFP/LQFP, 12 mm x 12 mm
Brand NXP Semiconductors
Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
SRAM 8 KB
Operating Supply Voltage 1.71 V to 3.6 V
USB Support Full-speed USB 2.0
ADC Resolution 12 bit
Operating Temperature -40 °C to +105 °C

أبرز الفروقات

  • Broader package option within the Kinetis KL24 family (مقابلMKL24Z64VFM4)
  • USB-enabled low-power control platform (مقابلMKL24Z64VFM4)
  • Broad 1.71 V to 3.6 V operating range (مقابلMKL24Z64VFM4)

ملاحظات التصميم

Route USB D+ and D− as a short, coupled, controlled-impedance differential pair with minimal vias, stubs, and test-pad discontinuities. Follow the NXP layout guidance for connector placement, series resistance, supply decoupling, and ground references. Because the D+ and D− conductors carry a low-voltage differential signal, trace geometry and adjacent copper matter more than a visually symmetrical split.

Decouple each required supply rail close to the corresponding device pins using the capacitance and ESR strategy specified in the manufacturer datasheet. Confirm that the chosen regulator supports the 1.71 V to 3.6 V MCU operating range and the transient current required by the USB subsystem. Avoid routing switching-regulator return current beneath the MCU or analog grounds; use a controlled ground arrangement to prevent USB and digital activity from corrupting measurements.

Do not treat the 64-pin MKL24Z64VFM4 as a footprint-compatible substitute for the 80-pin MKL24Z64VLK4. Although both belong to the 64 KB Flash KL24 family, their pin counts and board land patterns differ. A migration is acceptable only after creating a complete pin-by-pin difference, remapping unavailable peripherals and GPIOs, and reviewing power, clock, USB, and firmware implications.

Separate analog inputs from USB, clock, and fast-switching paths, and provide a direct return path beneath the device where the recommended layout permits it. For sensitive measurements, use the 12-bit ADC only within its characterized input and reference conditions. Validate offset, gain, noise, and temperature-dependent error at the system level rather than assuming nominal resolution equals usable measurement accuracy.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance is confirmed by the LCSC product listing. No specific automotive qualification is identified for this industrial-temperature MCU, and no separate REACH, lead-free, halogen-free, or conflict-minerals declaration was established.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MKL24Z64VLK4 datasheet MKL24Z64VLK4 datasheet pdf MKL24Z64VLK4 pinout MKL24Z64VLK4 specifications NXP MKL24Z64VLK4 MKL24Z64VLK4 equivalent MKL24Z64VLK4 replacement MKL24Z64VLK4 vs MKL24Z64VFM4 MKL24Z64VLK4 LQFP80 footprint MKL24Z64VLK4 USB application circuit MKL24Z64VLK4 price MKL24Z64VLK4 stock

المكونات والمصطلحات ذات الصلة

NXP Semiconductors MKL24Z64VLK4 MKL24Z64VFM4 Kinetis KL2 Kinetis KL24 Arm Cortex-M0+ 32-bit microcontroller embedded processor ultra-low-power MCU full-speed USB 2.0 USB OTG 64 KB Flash 8 KB SRAM 12-bit ADC 48 MHz 1.71 V to 3.6 V 80-pin FQFP/LQFP LQFP surface-mount package industrial temperature grade USB sensor node industrial condition monitoring embedded data logger low-power control module
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر