Texas Instruments

MSP430F5418IPN - 18MHz 128KB Flash MCU | Texas Instruments

MPN: MSP430F5418IPN ✓ نشط
80-pin LQFP, 12 mm x 12 mm Package 18 MHz Speed 128 KB Memory
الحد الأدنى للطلب: 1 |

MSP430F5418IPN نظرة عامة

The Texas Instruments MSP430F5418IPN is a 16-bit mixed-signal microcontroller operating at up to 18 MHz, with 128 KB of Flash memory, 16 KB of SRAM, and a 12-bit ADC in an 80-pin LQFP package. It integrates DMA, a hardware multiplier, timers, UART, SPI, and I2C interfaces for embedded control systems that require deterministic performance, efficient peripheral access, and a broad selection of general-purpose I/O.

A mixed-signal microcontroller is an embedded processing device that combines a digital CPU with analog measurement and conversion functions. The MSP430 architecture belongs to the broader microcontroller and semiconductor hierarchy. Its 16-bit CPU, memory organization, and integrated peripherals make it suitable for sensor acquisition, industrial instrumentation, embedded control, and communication-oriented products where deterministic operation and low-power design are important.

The MSP430F5418IPN provides 128 KB of Flash for firmware and 16 KB of SRAM for working memory. Its 12-bit ADC supports analog signal acquisition, while DMA reduces the processing burden associated with repetitive peripheral transfers. Three timers, UART, SPI, and I2C interfaces provide dedicated resources for timing, serial communications, and sensor connectivity. A hardware multiplier accelerates arithmetic operations commonly encountered in control and signal-processing applications.

The MCU uses the MSP430 CPUXV2 architecture and is implemented in an 80-pin LQFP package measuring 12 mm by 12 mm. The exact pin assignments, operating-voltage limits, converter performance, clock configuration, and current-consumption figures are defined in the manufacturer datasheet and should be checked against the complete board requirements before design release. Industrial-grade temperature marking is identified for this ordering code.

Typical applications include industrial sensor controllers, data-acquisition modules, metering equipment, motor and process-control panels, communications equipment, and embedded measurement systems. Its mix of 12-bit conversion, serial interfaces, timers, DMA, and general-purpose I/O supports designs that combine analog supervision with local control and data transfer.

PCB design should preserve clean analog and digital supply paths, provide the required decoupling close to the power pins, and route communications and sensor signals away from high-current switching nodes. Because this legacy MCU relies on an 80-pin LQFP footprint, footprint compatibility and peripheral-level pin equivalence must be verified individually rather than inferred only from family membership or clock speed.

This page consolidates manufacturer specifications, package and ordering information, lifecycle context, drop-in replacement candidates, comparison parameters, and practical integration guidance. It is intended to help engineers screen the MSP430F5418IPN for embedded designs and then confirm the final electrical, timing, pinout, and qualification requirements against the official device documentation.

بدائل مباشرة لـ MSP430F5418IPN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MSP430F5418AIPN

✅ بديل مباشر
📦 80-pin LQFP, 12 mm x 12 mm
Listed clock increases from 18 MHz to 25 MHz, a 39% increase; memory and major peripheral resources align, but timing and firmware must be revalidated.

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F5419IPN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 80-pin LQFP, 12 mm x 12 mm
Same 80-pin LQFP MSP430F54x1A family platform, with device-specific memory and peripheral differences requiring confirmation; listed clock target remains approximately 18 MHz.

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F5428IPN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 80-pin LQFP, 12 mm x 12 mm
Shares the MSP430F54x1A 80-pin LQFP platform and approximately 18 MHz clock class, but RAM, timer, and peripheral configuration differ by family position.

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F5438IPN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 80-pin LQFP, 12 mm x 12 mm
Uses the same MSP430F54x8A 80-pin LQFP family package and approximately 18 MHz clock class, while larger-memory and peripheral resources may differ from MSP430F5418IPN.

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F5438AIPN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 80-pin LQFP, 12 mm x 12 mm
Retains the 80-pin LQFP family footprint but raises the listed clock from 18 MHz to 25 MHz, a 39% increase, requiring timing and power revalidation.

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F5418IPN الحدود القصوى والخصائص الكهربائية

CPU Architecture MSP430 CPUXV2, 16-bit RISC
أقصى تردد للساعة 18 MHz
Flash Memory 128 KB
SRAM 16 KB
ADC Resolution 12 bits
ADC Type 12-bit successive-approximation ADC
DMA Supported
Hardware Multiplier Supported
Serial Interfaces UART, SPI, and I2C
Timer Resources Three 16-bit timers
العلبة 80-pin LQFP, 12 mm x 12 mm
Package Code LFQFP
Terminal Form Gull wing
Package Shape Square
Number of Terminals 80
Temperature Grade Industrial
نوع التركيب Surface mount

دليل تكوين أطراف MSP430F5418IPN square

تكوين الأطراف لـ MSP430F5418IPN (حزمة square). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة square لـ MSP430F5418IPN

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MSP430F5418IPN.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MSP430F5418IPN مناسب لـ 6 التطبيقs: Industrial Sensor Controllers, Data Acquisition Modules, Industrial Metering Equipment, Process Control Panels, Communication Embedded Modules, Low-Power Embedded Control.

🏭

Industrial Sensor Controllers

The MSP430F5418IPN fits industrial sensor controllers because it combines a 12-bit ADC with 16 KB of SRAM, three 16-bit timers, and UART, SPI, and I2C communication interfaces. The MCU can acquire analog sensor data, apply filtering and control calculations, and communicate results to a local controller or host. Its 18 MHz CPU supports deterministic interrupt handling, while DMA can reduce processor involvement during repetitive transfers. The 80-pin LQFP package also provides a substantial connection count for multi-sensor assemblies. Firmware should budget conversion, filtering, and communication latency carefully to maintain deterministic sampling intervals under worst-case processing load.

📊

Data Acquisition Modules

The MSP430F5418IPN is appropriate for compact data-acquisition modules requiring simultaneous digital processing and analog measurement. Its 12-bit ADC provides a practical resolution level for process monitoring, while 128 KB of Flash accommodates firmware, calibration tables, and configuration data. DMA supports efficient movement of sampled or serial data, and the hardware multiplier assists with arithmetic operations. UART can support a simple host interface, while SPI and I2C connect to converters, memory, or remote sensors. A practical design should define acquisition timing, input bandwidth, and calibration strategy before fixing the analog network, since the MCU cannot compensate for an unsuitable front end.

🔧

Industrial Metering Equipment

The MSP430F5418IPN supports metering equipment that combines analog sensing, timing, and secure local data transfer. The 12-bit ADC can monitor a conditioned sensor signal, three timers can establish measurement and communication intervals, and the hardware multiplier supports arithmetic used in calibration or compensation. With 128 KB of Flash and 16 KB of SRAM, the device can retain calibration parameters and maintain working buffers without an external memory component. UART or I2C can connect a local display or data module, while SPI supports higher-speed peripherals. Designers should isolate analog inputs from digital switching and verify the metering accuracy through calibration against the complete signal chain.

⚙️

Process Control Panels

The MSP430F5418IPN can serve as the local controller in an industrial process-control panel where analog inputs, discrete I/O, timers, and serial communications must coexist in one device. Its 18 MHz 16-bit CPU supports responsive supervisory logic, while the 12-bit ADC supports process-variable monitoring and the three timers support periodic control or maintenance functions. UART, SPI, and I2C permit connection to operator interfaces, remote I/O, and configuration storage. DMA can service transfers without tying up the CPU during routine data movement. A robust implementation should include watchdog and fault-response behavior, define safe outputs during resets, and validate timing against worst-case communication and control-loop latency.

🌐

Communication Embedded Modules

The MSP430F5418IPN fits embedded communications modules that need flexible serial connectivity and local real-time control. UART supports a host or modem interface, SPI supports faster external transceivers and memory, and I2C addresses slower low-power peripherals. The 128 KB of Flash is useful for protocol state machines and configuration, while DMA and the hardware multiplier improve throughput in data-intensive routines. Three timers provide independent timing resources for protocol deadlines, periodic sampling, or pulse generation. The MCU’s broad I/O capacity also permits status indicators, configuration inputs, and fault signals. Firmware should include framing checks, timeout recovery, and bus-level contention handling rather than relying solely on nominal baud-rate calculations.

🔋

Low-Power Embedded Control

The MSP430F5418IPN supports low-power embedded control applications by combining a 16-bit CPU, event-oriented serial peripherals, timers, DMA, and 128 KB of Flash in one device. The microcontroller can remain idle between external events while timers or communications wake it for measurement and control work, reducing the need for separate logic devices. The 12-bit ADC supports battery- or line-powered sensing where resolution and low-power behavior are both important. Exact sleep-current and wake-up timing figures should be taken from the manufacturer datasheet for the selected supply voltage and peripheral configuration. Firmware must disable unused peripherals and configure unused pins to prevent unintended current consumption.

ملخص المنتجات الموصى بها

MSP430F5418IPN Texas Instruments يُستخدم في: Industrial Sensor Controllers, Data Acquisition Modules, Industrial Metering Equipment, Process Control Panels, Communication Embedded Modules, Low-Power Embedded Control MSP430F5418AIPN Higher-clock family alternative يُستخدم في: Industrial Sensor Controllers, Data Acquisition Modules, Industrial Metering Equipment, Process Control Panels, Communication Embedded Modules MSP430F5418IPNR Tape-and-reel ordering configuration يُستخدم في: Industrial Sensor Controllers, Communication Embedded Modules MSP430F412IPMR Texas Instruments يُستخدم في: Data Acquisition Modules, Industrial Metering Equipment, Low-Power Embedded Control MSP430F437IPNR Texas Instruments يُستخدم في: Process Control Panels, Low-Power Embedded Control
What is the MSP430F5418IPN?
The MSP430F5418IPN is a Texas Instruments 16-bit mixed-signal microcontroller with an 18 MHz CPU, 128 KB of Flash, 16 KB of SRAM, and a 12-bit ADC. It also provides DMA, a hardware multiplier, timers, UART, SPI, and I2C interfaces in an 80-pin LQFP package. According to the Texas Instruments MSP430F5418 product page and manufacturer datasheet, this combination targets embedded measurement, communications, and control systems requiring broad peripheral integration and deterministic operation.
What are the key specifications of MSP430F5418IPN that engineers should know?
The MSP430F5418IPN combines a 16-bit MSP430 CPUXV2 processor, 18 MHz maximum clock, 128 KB Flash, 16 KB SRAM, and a 12-bit ADC. Integrated resources include DMA, a hardware multiplier, three 16-bit timers, UART, SPI, and I2C. The device is offered in an 80-pin, 12 mm by 12 mm LQFP package. Texas Instruments describes the MSP430F5418 as a mixed-signal MCU suited to control, acquisition, and serial-communication designs.
Where can I download the MSP430F5418IPN datasheet PDF?
The official MSP430F5418 datasheet and supporting documentation are available through the Texas Instruments product page at https://www.ti.com/product/MSP430F5418. The manufacturer product page links the device data sheet, ordering information, application documentation, and user’s-guide material. Use the ordering-code section to confirm that MSP430F5418IPN corresponds to the industrial-temperature, 80-pin LQFP configuration and verify the complete pin-description table before laying out the PCB.
Where can I find the MSP430F5418IPN pinout?
The MSP430F5418IPN pinout is defined in the pin-configuration and terminal-description tables in the Texas Instruments manufacturer datasheet. The device uses an 80-pin LQFP package with gull-wing leads and a 12 mm by 12 mm body. Use the package drawing and pin table together to map port, power, ground, reset, clock, and peripheral signals. The abbreviated distributor descriptions do not provide the complete signal-by-signal assignment, so the official pin table should govern PCB routing.
What peripherals are integrated in the MSP430F5418IPN?
The MSP430F5418IPN integrates a 12-bit ADC, DMA controller, hardware multiplier, three 16-bit timers, and serial communications resources for UART, SPI, and I2C. It also includes 128 KB of Flash and 16 KB of SRAM. According to the Texas Instruments product description, these peripherals reduce external component requirements and let firmware coordinate acquisition, timing, serial transfers, and control tasks within one mixed-signal MCU.
What is the memory configuration of the MSP430F5418IPN?
The MSP430F5418IPN contains 128 KB of Flash memory and 16 KB of SRAM. Flash provides nonvolatile storage for firmware, configuration data, and constants, while SRAM supports stack, variables, buffers, and working state. The exact flash organization, memory map, and programming model are described in the manufacturer’s MSP430F5xx documentation. Designers should partition code and constant storage according to that memory map when creating linker configurations.
Is MSP430F5418IPN suitable for industrial sensor and acquisition systems?
The MSP430F5418IPN is suitable for industrial sensor and acquisition systems that benefit from a 12-bit ADC, 128 KB of Flash, 16 KB of SRAM, and integrated serial interfaces. DMA can move peripheral data with less CPU intervention, while three timers support periodic sampling and control functions. UART, SPI, and I2C allow connection to external sensors, transceivers, and local peripherals. The industrial temperature marking also makes the ordering code suitable for industrial qualification reviews.
Where can I buy MSP430F5418IPN online?
Use the Request a Quote form on this page to request MSP430F5418IPN availability, lead time, and an order quotation from XAIPART. The form is the appropriate route for checking the exact 80-pin LQFP ordering code, current stock status, and minimum order quantity. Because MSP430F5418 and MSP430F5418A have different frequency-related ordering information, include MSP430F5418IPN verbatim in the request to prevent substitution ambiguity.
What is the price of MSP430F5418IPN?
The current price of MSP430F5418IPN is obtained through the Request a Quote form on this page. The quote request should specify the quantity, industrial 80-pin LQFP package, and required production schedule. This approach keeps the commercial response tied to the exact MSP430F5418IPN ordering code rather than MSP430F5418IPNR or the electrically different MSP430F5418A family, and it permits confirmation of lot-related availability.
What is the lead time for MSP430F5418IPN?
The current MSP430F5418IPN lead time is confirmed through the Request a Quote form on this page. Include the required quantity, target date, and whether the shipment will use the standard industrial-temperature 80-pin LQFP configuration. Because availability can vary by lot, device revision, and order quantity, obtain written confirmation before committing the manufacturing schedule. Keep the full MPN on the purchase order and reject unrequested suffix substitutions.
Is MSP430F5418IPN in stock?
Current MSP430F5418IPN stock is checked through the Request a Quote form on this page. Provide the required quantity and production schedule so the response can reflect available lots and expected allocation. The requested device should be identified as MSP430F5418IPN, the industrial 80-pin LQFP version. This avoids confusion with MSP430F5418IPNR, which has a different orderable suffix and may be supplied in a different packing format.
MSP430F5418IPN vs MSP430F5418AIPN - which is better for a new design?
MSP430F5418AIPN is generally the better starting point for a new design when its 25 MHz performance and updated device characteristics satisfy the application, while MSP430F5418IPN is the 18 MHz legacy selection. Both are associated with 128 KB Flash, 16 KB SRAM, a 12-bit ADC, DMA, serial interfaces, timers, and an 80-pin LQFP format. Texas Instruments lists both product families, but firmware timing, power behavior, errata, and lifecycle requirements must be reviewed separately.
What is the difference between MSP430F5418IPN and MSP430F5418AIPN?
The principal listed difference is clock-related: the MSP430F5418IPN is identified as an 18 MHz device, while the MSP430F5418A product page identifies a 25 MHz MCU. Both families use the MSP430F5xx architecture and are associated with 128 KB Flash, 16 KB SRAM, 12-bit conversion, DMA, timers, and serial interfaces. Treat the A-device as a distinct ordering and validation decision rather than a casual suffix substitution, and compare the official datasheets for supply voltage and peripheral differences.
When should I choose MSP430F5418IPN instead of MSP430F5418AIPN?
Choose MSP430F5418IPN when an existing MSP430F5418-based design has been validated at 18 MHz, the current firmware and qualification evidence apply to that device, and replacement continuity is more important than maximum clock performance. Choose MSP430F5418AIPN for a new design needing the listed 25 MHz operating point or a newer family baseline. In either case, compare interrupt timing, analog conversion behavior, brownout conditions, and errata against the actual power system and firmware schedule.
What can replace MSP430F5418IPN?
The closest same-family drop-in candidates include MSP430F5419IPN, MSP430F5418AIPN, MSP430F5428IPN, MSP430F5438IPN, and MSP430F5438AIPN, all using the 80-pin LQFP family format. These are not unconditional replacements: memory, analog-channel, timer, communication, clock, and software differences must be checked. In particular, MSP430F5418AIPN has a listed 25 MHz clock versus 18 MHz for MSP430F5418IPN, so existing timing and power designs require revalidation.
Is there a verified cross-brand drop-in replacement for MSP430F5418IPN?
No verified cross-brand, pin-to-pin drop-in replacement for MSP430F5418IPN is established by the available cross-reference results. Its 80-pin LQFP footprint and MSP430-specific peripheral arrangement make generic MCU substitutions unsuitable without detailed board-level verification. Use the Request a Quote form when sourcing the exact Texas Instruments part or a same-family alternative. For a cross-brand redesign, evaluate processor architecture, memory map, ADC characteristics, timer behavior, development-tool support, and board changes rather than treating it as a drop-in exchange.

بيانات مرجعية هندسية لـ MSP430F5418IPN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MSP430F5418IPN when maintaining an existing 18 MHz MSP430F5418 design, preserving firmware and qualification continuity, or sourcing the exact industrial 80-pin LQFP ordering code. It provides 128 KB of Flash, 16 KB of SRAM, a 12-bit ADC, DMA, three timers, and UART, SPI, and I2C in one package. Consider MSP430F5418AIPN for a new design that benefits from the listed 25 MHz clock, but review supply, power, errata, and timing changes before substitution. MSP430F5419IPN, MSP430F5428IPN, MSP430F5438IPN, and MSP430F5438AIPN are same-family footprint options whose memory and peripheral resources must be checked. No verified cross-brand drop-in replacement is established, so redesigning around another MCU architecture should be treated as a new hardware and firmware qualification effort.

المقارنة مع البدائل

المعامل هذا المنتج MSP430F5418AIPN MSP430F5419IPN MSP430F5428IPN MSP430F5438IPN MSP430F5438AIPN
Package 80-pin LQFP, 12 mm x 12 mm 80-pin LQFP, 12 mm x 12 mm 80-pin LQFP, 12 mm x 12 mm 80-pin LQFP, 12 mm x 12 mm 80-pin LQFP, 12 mm x 12 mm 80-pin LQFP, 12 mm x 12 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Architecture 16-bit MSP430 CPUXV2 16-bit MSP430 CPUXV2 16-bit MSP430 CPUXV2 16-bit MSP430 CPUXV2 16-bit MSP430 CPUXV2 16-bit MSP430 CPUXV2
ADC Resolution 12 bits 12 bits 12 bits 12 bits 12 bits 12 bits
Serial Interfaces UART, SPI, and I2C UART, SPI, and I2C UART, SPI, and I2C UART, SPI, and I2C UART, SPI, and I2C UART, SPI, and I2C
DMA and Hardware Multiplier Both supported Both supported Both supported Both supported Both supported Both supported

أبرز الفروقات

  • 18 MHz legacy MSP430 performance baseline (مقابلMSP430F5418AIPN)
  • Complete 128 KB Flash and 16 KB SRAM configuration (مقابلMSP430F5418AIPN)
  • High peripheral integration in the original 18 MHz device (مقابلMSP430F5418IPN)
  • Industrial ordering code in an 80-pin LQFP package (مقابلMSP430F5418AIPN)

ملاحظات التصميم

Route the 80-pin LQFP footprint strictly from the manufacturer package drawing and pin-description table. Place all required bypass capacitors close to their associated power pins, keep analog inputs away from high-current switching nodes, and provide a solid ground reference beneath the device. Because this package is not represented by an exact 80-pin diagram in the package library, use the manufacturer drawing for land patterns, solder-mask clearance, and pin-1 orientation rather than relying on a generic footprint.

Treat ADC inputs, serial interfaces, and clock signals according to their expected bandwidth. Use a compact analog front end with controlled source impedance, place the input network near the MCU pins, and keep return paths continuous. UART, SPI, and I2C lines should have appropriate termination or series damping where edge rates require it. Validate timing margins with the worst-case clock configuration and peripheral load because changing from 18 MHz to a 25 MHz family member alters edge-rate-related margin and power behavior.

Decouple each supply domain at the device pins and isolate sensitive analog circuitry from switching-regulator outputs. Determine allowable input and output capacitance, supply voltage range, and power sequencing from the official datasheet before selecting bulk and ceramic capacitors. After an alternative with a higher clock is selected, recalculate activity-dependent dissipation and thermal margin rather than assuming that the 18 MHz design’s thermal behavior remains unchanged.

Do not confuse MSP430F5418IPN with MSP430F5418AIPN, MSP430F5418IPNR, or other members of the MSP430F54x family. The A version has a listed 25 MHz clock, the R suffix denotes a different ordering and packing configuration, and related family members can differ in memory or peripheral resources. Before replacing the device, compare the complete pin table, supply limits, reset behavior, interrupt vector, timer resources, ADC channels, firmware startup code, and qualification requirements.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The industrial temperature grade and package construction are identified, but no definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is stated for this ordering code.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MSP430F5418IPN datasheet MSP430F5418IPN pinout MSP430F5418IPN datasheet pdf MSP430F5418IPN specifications MSP430F5418IPN equivalent MSP430F5418IPN replacement MSP430F5418IPN cross reference MSP430F5418IPN vs MSP430F5418AIPN MSP430F5418IPN 80 LQFP footprint MSP430F5418IPN application circuit MSP430F5418IPN price MSP430F5418IPN stock Texas Instruments MSP430F5418IPN MSP430F5418 18MHz 128KB Flash

المكونات والمصطلحات ذات الصلة

Texas Instruments MSP430F5418IPN MSP430F5418AIPN MSP430F5419IPN MSP430F5428IPN MSP430F5438IPN MSP430F5438AIPN MSP430 MSP430 CPUXV2 mixed-signal microcontroller 16-bit RISC microcontroller embedded microcontroller semiconductor 12-bit ADC direct memory access DMA hardware multiplier UART SPI I2C 16-bit timer 128 KB Flash 16 KB SRAM 80-pin LQFP LQFP family surface-mount package industrial embedded control sensor acquisition
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر