OPA333AIDBVR - 1.8V 17uA Zero-Drift Op Amp | TI
MPN: OPA333AIDBVR ✓ نشطOPA333AIDBVR نظرة عامة
An operational amplifier is a voltage-gain element used in amplifier, comparator, buffer, integrator, and sensor-conditioning circuits. The OPAx333 family belongs to the precision amplifier hierarchy, using CMOS construction and proprietary auto-calibration to combine low offset with near-zero drift. Its rail-to-rail input and output characteristics help preserve usable signal range in low-voltage systems, while the 17 uA supply current supports battery-powered and portable equipment.
The OPA333AIDBVR combines a 10 uV maximum offset voltage, near-zero drift, rail-to-rail operation, and low quiescent current in one compact five-pin package. According to the Texas Instruments product page, the common-mode input range reaches 100 mV beyond the rails, and the output swings rail-to-rail. These features make the amplifier useful when the measured signal is small, the supply voltage is limited, and system power budget is important.
The zero-drift architecture periodically corrects the amplifier's offset through auto-calibration. This improves long-term stability compared with a conventional amplifier whose offset changes with temperature and aging, although calibration behavior and noise should still be considered in the complete signal chain. The CMOS process and low-power design also make the part suitable for precision instrumentation, sensor interfaces, and low-voltage analog systems.
Typical applications include battery-powered sensor conditioning, portable measurement equipment, low-current analog interfaces, precision current sensing, and general low-voltage signal amplification. OPA333AIDBVR is particularly appropriate when the application requires low offset, low supply current, and operation from a 1.8 V class supply. The amplifier's compact SOT-23-5 footprint simplifies board-level integration in space-constrained designs.
Designers should verify the complete supply range, input common-mode limits, output swing, noise, settling behavior, and calibration requirements against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and sensitive analog signals should be routed away from switching nodes and high-current paths. This page combines verified manufacturer and distributor information with practical engineering guidance for selecting and integrating the device.
This OPA333AIDBVR data sheet is available through Texas Instruments' product page and authorized distributor listings, while alternative selection and package compatibility should be checked against the specific design requirements.
بدائل مباشرة لـ OPA333AIDBVR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع OPA333AIDBVR (نفس عامل الشكل والبصمة) — يختلف في Input Type, Operating Temperature, Package.
OPA333AIDBVT
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA333AIDBVTG4
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA333AIDB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA333AID
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA333AMDBVREP
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA333AIDBVR الحدود القصوى والخصائص الكهربائية
| Product Type | Single-channel zero-drift CMOS operational amplifier |
| جهد التغذية | 1.8 V minimum |
| تيار السكون | 17 uA |
| Maximum Input Offset Voltage | 10 uV |
| Input Drift | Near-zero drift |
| Input Common-Mode Range | 100 mV beyond the supply rails |
| Output Swing | Rail-to-rail |
| Input Type | High impedance |
| Technology | Proprietary auto-calibration, CMOS |
| Number of Channels | 1 |
| العلبة | SOT-23-5 |
| نوع التركيب | Surface mount |
| درجة حرارة التشغيل | -40C to +125C |
| Supplier Category | Zero-drift amplifier |
| Packaging Format | Tape and reel |
دليل تكوين أطراف OPA333AIDBVR sot-23-5
تكوين الأطراف لـ OPA333AIDBVR (حزمة sot-23-5). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ OPA333AIDBVR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
OPA333AIDBVR مناسب لـ 7 التطبيقs: Battery-Powered Sensor Conditioning, Portable Precision Measurement, Low-Voltage Current Sensing, Precision Buffering, Low-Power Data Acquisition, Portable Medical or Environmental Monitoring, Low-Voltage Signal Conditioning.
Battery-Powered Sensor Conditioning
OPA333AIDBVR fits low-power sensor interfaces because it operates from a 1.8 V minimum supply and consumes 17 uA quiescent current. Its maximum input offset voltage of 10 uV helps preserve small sensor signals, while the high-impedance inputs reduce loading on suitable resistive sensors. Place the amplifier close to the sensor and bypass the supply pins to reduce noise pickup. The design must still verify sensor impedance, signal bandwidth, and the amplifier's complete electrical limits.
موصى به
Portable Precision Measurement
OPA333AIDBVR is suitable for portable meters and precision measurement front ends where DC offset can limit accuracy. Its 10 uV maximum input offset and near-zero drift reduce sensitivity to temperature and time compared with a conventional amplifier, while the 17 uA supply current supports long battery operation. Use it in non-inverting, differential, or buffer configurations after checking common-mode range and output swing. The auto-calibration architecture should be included in the system-level noise and settling analysis.
موصى به
Low-Voltage Current Sensing
OPA333AIDBVR can amplify the small voltage generated by a low-side or appropriately biased current-sense element when the common-mode and output ranges meet the circuit requirements. Its 10 uV maximum input offset helps preserve accuracy near zero current, and the 17 uA quiescent current limits the amplifier's contribution to a battery-powered budget. The sense resistor, filtering, Kelvin routing, and amplifier settling must be evaluated together; the zero-drift behavior does not eliminate all noise or layout errors.
موصى به
Precision Buffering
OPA333AIDBVR is appropriate for voltage buffering when the source has relatively high impedance and the load must be driven from a low-power rail. Rail-to-rail output helps retain output range, and the high-impedance input stage minimizes loading. However, buffer stability, capacitive loading, noise, and settling should be checked for the exact source impedance and bandwidth. Decoupling should be placed close to the supply pins, and the output should be kept within the datasheet-defined swing limits.
موصى به
Low-Power Data Acquisition
OPA333AIDBVR is useful in compact data-acquisition systems that need accurate amplification of slow or near-DC signals from resistive bridges, strain gauges, or other sensors. The 1.8 V-class supply and 17 uA quiescent current support reduced-power designs, while the 10 uV maximum offset and near-zero drift improve long-term measurement stability. Check amplifier noise density, input bias behavior, common-mode voltage, and filter bandwidth before selecting the gain and sampling rate.
موصى به
Portable Medical or Environmental Monitoring
OPA333AIDBVR can support low-level analog signal conditioning in portable monitoring products where battery consumption and measurement stability are important. Its rail-to-rail input/output behavior is useful when the signal remains close to the available supply range, and the 10 uV maximum offset helps reduce baseline error. For medical or environmental applications, validate noise, isolation, calibration, safety requirements, and regulatory constraints separately; the supplied data does not establish medical or automotive qualification.
موصى به
Low-Voltage Signal Conditioning
OPA333AIDBVR is appropriate for general low-voltage signal conditioning when the circuit needs low offset, low drift, and low quiescent current without requiring a large package. It can serve as a precision gain stage before an ADC or as a low-power buffer for a sensor reference. Maintain the input common-mode voltage within the specified range, ensure the output does not exceed the rail-to-rail limits, and account for auto-calibration timing when the system samples data immediately after power-up.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ OPA333AIDBVR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | OPA333AIDBVT | OPA333AIDBVTG4 | OPA333AIDB | OPA333AID | OPA333AMDBVREP |
|---|---|---|---|---|---|---|
| Package | SOT-23-5 | SOT-23-5 | SOT-23-5 | SOT-23-5 | SOT-23-5 | SOT-23-5 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Zero-drift CMOS operational amplifier | Zero-drift CMOS operational amplifier | Zero-drift CMOS operational amplifier | Zero-drift CMOS operational amplifier | Zero-drift CMOS operational amplifier | Zero-drift CMOS operational amplifier |
| Minimum Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Quiescent Current | 17 uA | 17 uA | 17 uA | 17 uA | 17 uA | 17 uA |
أبرز الفروقات
- Low offset and near-zero drift in a compact precision amplifier (مقابلOPA333AIDBVT)
- Low-power operation for portable analog systems (مقابلOPA333AIDBVTG4)
- Rail-to-rail signal-range support (مقابلOPA333AIDB)
ملاحظات التصميم
Place the supply-decoupling capacitor as close as practical to the OPA333AIDBVR supply and ground pins. Because the verified device specification is only 17 uA quiescent current, capacitor selection and leakage should still be checked against the required startup behavior, sensor impedance, and analog noise target. Confirm the exact minimum and maximum supply ratings from the manufacturer datasheet before applying the amplifier outside a 1.8 V-class rail.
Route the high-impedance input node as a short, guarded trace and keep it away from switching regulators, digital clocks, inductors, and high-current return paths. For sensor interfaces, use a quiet ground reference and consider a driven or shielded guard where leakage and board contamination matter. The small SOT-23-5 footprint helps placement, but the pin configuration must be taken from the manufacturer drawing rather than inferred from the package name.
Verify common-mode voltage, output swing, noise, bandwidth, and settling for the actual gain configuration before closing the signal path. OPA333AIDBVR's 10 uV maximum offset and near-zero drift are advantageous for near-DC measurements, but they do not remove errors caused by resistor tolerance, source impedance, ADC noise, or inadequate filtering. Account for startup and auto-calibration timing if the system samples immediately after power-up.
معلومات الامتثال
The supplied manufacturer and distributor data does not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact OPA333AIDBVR orderable MPN.
