PI7C9X7952BFDEX - Dual PCI to UART Bridge | Diodes
MPN: PI7C9X7952BFDEX ✓ نشطPI7C9X7952BFDEX نظرة عامة
A PCI Express interface bridge is an interface IC that allows a modern host bus to communicate with peripherals designed for older or parallel interface architectures. In the broader semiconductor hierarchy, this product belongs to the PCI Express bridge family within interface controllers and interface ICs. It translates host-side PCI Express transactions into UART signals for serial peripherals while consolidating two channels in a single device.
The PI7C9X7952BFDEX provides two UART channels and accepts 1.8 V or 3.3 V supply levels. Its 128-LQFP package provides 128 electrical contacts for the PCI Express, UART, power, ground, configuration, and control functions required by the bridge. The exact operating temperature, PCIe lane configuration, baud-rate range, transceiver characteristics, and auxiliary interface details should be confirmed in the manufacturer datasheet before a production design is released.
Technically, the device separates the PCI Express host interface from the two UART endpoints, allowing peripheral equipment to retain serial interfaces without requiring separate PCI UART controllers. This integration can simplify system routing and reduce the number of discrete interface components. Because it is a digital bridge rather than a power semiconductor, its performance depends primarily on signal integrity, reference-clock management, supply sequencing, and correct PCI Express configuration rather than thermal resistance or safe-operating-area limits.
Typical applications include industrial serial adapters, point-of-sale equipment, data-acquisition systems, communications equipment, and legacy peripheral expansion cards. The two-channel architecture is useful when a system must expose more than one UART endpoint, while the compact 14 x 14 mm LQFP package supports conventional surface-mount PCB assembly. System designers should also evaluate the mechanical height, exposed routing requirements, and available board area associated with a 128-pin package.
Design attention should focus on high-speed PCI Express signal routing, UART signal integrity, reference-clock connections, decoupling, and proper PCIe port configuration. Follow the manufacturer’s recommended PCB stack-up, trace-length, impedance, and component-placement guidance for high-speed signals. The PI7C9X7952BFDEX should not be selected as a generic UART transceiver when the system requires standalone RS-232 electrical levels rather than digital UART signals.
This page organizes the verified package, protocol, channel-count, and supply information for the PI7C9X7952BFDEX while clearly separating confirmed electrical characteristics from parameters that still require datasheet verification. It also provides practical sourcing, replacement, layout, and selection guidance for engineers evaluating this dual-channel PCI Express-to-UART bridge.
بدائل مباشرة لـ PI7C9X7952BFDEX — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
PI7C9X7952BFDEX-55
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PI7C9X7952BFDEX الحدود القصوى والخصائص الكهربائية
| Product Type | PCI Express to dual UART interface bridge |
| PCI Express Interface | PCI Express |
| UART Interface | Dual UART |
| Number of UART Channels | 2 channels |
| جهد التغذية | 1.8 V or 3.3 V |
| Minimum Supply Voltage | 1.8 V |
| Maximum Supply Voltage | 3.3 V |
| العلبة | 128-LQFP (14 x 14 mm) |
| Package Pin Count | 128 pins |
| نوع التركيب | Surface mount |
| الفئة | UART interface IC |
| الوظيفة | PCI function bridge, PCI to UART interface |
| Packaging | Tape and reel |
دليل تكوين أطراف PI7C9X7952BFDEX 128 pins
تكوين الأطراف لـ PI7C9X7952BFDEX (حزمة 128 pins). يتميز جهاز الطاقة هذا بأطراف البوابة والمصرف والمصدر. بالنسبة للحزم غير المستقطبة، راجع ورقة بيانات الشركة المصنعة لمعرفة الاتجاه الدقيق للطرف 1 وتفاصيل البصمة. تشمل التطبيقات الشائعة تصميم مصادر الطاقة وتشغيل المحركات وتبديل الأحمال.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ PI7C9X7952BFDEX.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
PI7C9X7952BFDEX مناسب لـ 6 التطبيقs: Industrial PCI Express Serial Expansion, Point-of-Sale Terminal Interface, Data-Acquisition Controller, Communications Equipment, Legacy Peripheral Expansion Card, Embedded Test and Measurement System.
Industrial PCI Express Serial Expansion
PI7C9X7952BFDEX fits a PCI Express expansion card that must expose two digital UART channels to industrial peripherals. Its confirmed two-channel PCI Express-to-UART architecture consolidates two serial endpoints without requiring separate PCI UART interface devices, while the 1.8 V or 3.3 V supply support accommodates common embedded logic levels. The 128-LQFP footprint provides all bridge functions in one device, but the design still requires careful treatment of high-speed PCIe routing, reference clocks, UART signal paths, and power decoupling. Confirm the grade-specific temperature and timing requirements against the manufacturer datasheet before using the bridge in a production industrial controller.
موصى به
Point-of-Sale Terminal Interface
PI7C9X7952BFDEX can support a point-of-sale or retail terminal that receives commands through a PCI Express host while communicating with two peripheral subsystems over UART. The bridge provides two UART channels from one 128-LQFP device, reducing the number of interface controllers required when both a printer or scanner and a separate status or control peripheral are present. Its 1.8 V or 3.3 V operation supports embedded platform architectures. Designers should budget external level translation or transceiver components if the connected equipment requires RS-232, RS-422, or RS-485 electrical signaling rather than logic-level UART.
موصى به
Data-Acquisition Controller
PI7C9X7952BFDEX is suitable for a data-acquisition controller that accepts commands through PCI Express and distributes them to two instrument-control channels. The two UART outputs can serve separate sensors, programmable instruments, or isolated-serial modules, while the integrated bridge avoids implementing the PCI transaction layer on the host PCB. The 1.8 V and 3.3 V supply choices support modern embedded systems, and the 14 x 14 mm LQFP package leaves room for connector and signal-conditioning components. Signal integrity, clock jitter, channel timing, and instrumentation-specific isolation remain system-level responsibilities that must be verified from the datasheet and application circuitry.
موصى به
Communications Equipment
PI7C9X7952BFDEX fits communications equipment that needs to retain UART service interfaces while adopting a PCI Express host architecture. Two UART channels can support modem control, configuration, telemetry, or legacy service connections without dedicating a separate bridge IC to each function. The device’s 1.8 V or 3.3 V operating capability supports compact embedded hardware, while the 128-LQFP package consolidates control and interface functions. In rack-mounted or communications equipment, engineers should separate sensitive UART routing from high-speed PCIe lanes, use the recommended reference-clock and decoupling arrangements, and verify that the selected grade satisfies the enclosure’s temperature requirements.
موصى به
Legacy Peripheral Expansion Card
PI7C9X7952BFDEX is appropriate for a PCI Express card designed to preserve access to two legacy UART peripherals during a platform transition. The device acts as the host-facing bridge and provides two serial endpoints for equipment that cannot be migrated directly to a modern USB, Ethernet, or memory-mapped interface. Its 1.8 V or 3.3 V supply operation allows integration with both low-voltage and 3.3 V embedded controllers. Because the bridge produces digital UART signals, an external line driver or transceiver remains necessary when the legacy peripheral uses RS-232, RS-422, or RS-485 levels.
موصى به
Embedded Test and Measurement System
PI7C9X7952BFDEX can provide two UART control paths in an embedded test and measurement system built around a PCI Express host. The channels may connect to programmable instruments, fixture controllers, or service interfaces while the host coordinates measurements over PCIe. Using one dual-channel bridge reduces the number of separate interface packages and keeps the design within a single 14 x 14 mm LQFP footprint. The implementation should prioritize controlled impedance for PCIe lanes, short UART routes away from switching nodes, clean reference-clock distribution, and local bulk decoupling. Confirm maximum baud rate and timing margins in the manufacturer datasheet for the instruments being controlled.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PI7C9X7952BFDEX — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PI7C9X7952BFDEX-55 |
|---|---|---|
| Manufacturer | Diodes Incorporated | Diodes Incorporated |
| Brand | Diodes Incorporated | Diodes Incorporated |
| Package | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) |
| Product Type | PCI Express to UART interface bridge | PCI Express to UART interface bridge |
| UART Channels | 2 channels | 2 channels |
| Supply Voltage | 1.8 V or 3.3 V | 1.8 V or 3.3 V |
| Host Interface | PCI Express | PCI Express |
| Package Pin Count | 128 pins | 128 pins |
| Grade Designation | BFDEX | BFDEX-55 |
أبرز الفروقات
- Consolidated dual-channel interface (مقابلPI7C9X7952BFDEX-55)
- Compact bridge integration (مقابلPI7C9X7952BFDEX-55)
- Flexible low-voltage supply support (مقابلPI7C9X7952BFDEX-55)
ملاحظات التصميم
Treat the PCI Express side as a high-speed digital interface and follow the manufacturer’s reference layout for trace geometry, impedance, reference-clock routing, and via transitions. Keep the bridge, decoupling capacitors, and supporting passive components in the same general signal region, while avoiding stubs and long parallel runs between layers. The 128-LQFP footprint leaves little routing space around the device, so the PCB stack-up and land pattern should be finalized before component placement and connector assignment.
Provide local low-inductance decoupling at every applicable supply pin and keep high-current return paths short and continuous. Because the bridge supports 1.8 V and 3.3 V supply operation, verify the actual rail connected to each power domain rather than treating both values as simultaneously required. Use the manufacturer’s recommended capacitor values, placement, and sequencing arrangement. Confirm the grade-specific operating limits before release because the family suffix can distinguish electrical or temperature behavior.
Do not treat UART logic signals as RS-232, RS-422, or RS-485 directly. The PI7C9X7952BFDEX provides digital UART channels, so an external transceiver, line driver, receiver, isolation barrier, or connector interface may be required. Similarly, do not substitute a same-package device solely because its outline matches: confirm host-interface behavior, UART timing, clock requirements, supply sequencing, channel functions, and temperature grade. The -55 ordering variant requires explicit compatibility review.
Keep UART routing away from clocks, switching power nodes, and high-speed PCIe edges, especially when long external cables are connected through nearby transceivers. Maintain the specified UART signal levels throughout the board and provide termination only where required by the external device and its interface standard. Validate eye closure, timing margins, ground bounce, and clock jitter at system level using representative traffic. These measurements are especially important when the two channels operate simultaneously.
معلومات الامتثال
The family is identified as RoHS details in comparison listings, but no definitive compliance declaration, AEC-Q100 status, halogen-free statement, or conflict-minerals report is established by the available product information.