PIC24EP256MC202-H/SO - 70 MIPS Motor Control MCU, 256KB Flash | Microchip
MPN: PIC24EP256MC202-H/SO ✓ نشطPIC24EP256MC202-H/SO نظرة عامة
A 16-bit microcontroller (MCU) is a single-chip processor core with on-chip Flash program memory, RAM, peripherals and I/O designed to combine deterministic real-time control with DSP-style arithmetic. The PIC24E family targets motor control, power conversion and high-end general-purpose embedded control - the PIC24EP256MC202-H/SO sits in the 'MC' (Motor Control) sub-family, with high-resolution PWM, dedicated quadrature encoder interfaces, op-amp outputs and an analog comparator designed to drive field-oriented control (FOC) loops.
Key features include 256 KB (85.5K x 24) self-programmable Flash with EEPROM emulation, 32 KB SRAM, 4 KB instruction cache, 70 MIPS performance at 70 MHz Fosc with 4x PLL, high-speed PWM (PWM with 7.5 ns resolution), dual analog comparators with 5 ns response, two on-chip operational amplifiers (5 MHz GBW) usable for current sensing, a 10-bit ADC at 1.1 Msps (12-bit option at 500 ksps), and a Peripheral Trigger Generator (PTG) for hardware-state-machine event sequencing. Communication peripherals include SPI, I2C, UART, CAN, and ECAN.
The device operates from 3.0 V to 3.6 V, integrates a low-jitter PLL, an LDO-based core supply, and a brown-out reset. Its 28-SOIC form factor suits single/three-phase BLDC/PMSM sensorless and sensored drives up to ~1 kW, while the higher-temperature -H grade supports under-hood automotive and industrial environments.
Typical applications include BLDC/PMSM sensorless and sensored motor control, field-oriented control (FOC) drives, switched-mode power supplies (PFC + LLC), uninterruptible power systems, photovoltaic inverters, and industrial automation with CAN-connected nodes.
When designing with the -H/SO, provide a low-impedance 3.3 V rail, place the 10 uF + 0.1 uF decoupling pair within 5 mm of the VDD pins, and reserve the ICSP/ICD pins (PGECx/PGEDx) for in-circuit debug. Ensure unused comparators are configured to defined states to avoid current spikes.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
بدائل مباشرة لـ PIC24EP256MC202-H/SO — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC24EP256MC202-H/SO (نفس عامل الشكل والبصمة) — يختلف في Core Architecture, Operating Temperature, Package, ADC, Analog Comparators.
PIC24EP256MC202-I/SO
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC24EP256MC202-H/SS
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP256MC202-H/SP
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP128MC202-H/SO
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP256GP202-I/SO
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP256MC202-H/SO الحدود القصوى والخصائص الكهربائية
| Product Family | PIC PIC 24EP |
| Core Architecture | 16-bit PIC24E DSC |
| Core Performance | 70 MIPS at 70 MHz (Fosc with 4x PLL) |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| RAM | 32 KB |
| Instruction Cache | 4 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| درجة حرارة التشغيل | -40C to +150C (-H grade) |
| العلبة | 28-SOIC (0.295", 7.50 mm width) |
| عدد الأطراف | 28 |
| ADC | 10-bit, 1.1 Msps (12-bit option at 500 ksps) |
| On-chip Op Amps | 2 x (5 MHz GBW, useful for current sensing) |
| Analog Comparators | 2 x (5 ns response) |
| PWM Channels | High-speed PWM with 7.5 ns resolution |
| Communication | SPI, I2C, UART, CAN (ECAN) |
| نوع التركيب | Surface Mount |
| مستوى MSL | 1 (unlimited) |
| حالة RoHS | Compliant |
| AEC-Q100 | AEC-Q100 qualified (automotive -H grade) |
تكوين أطراف PIC24EP256MC202-H/SO
| دبوس 1 | RA0 — Digital I/O / AN0 / U1TX |
| دبوس 2 | RA1 — Digital I/O / AN1 / OA1OUT / U1RX |
| دبوس 3 | RA2 — Digital I/O / AN2 / OA1IN- |
| دبوس 4 | RA3 — Digital I/O / AN3 / OA1IN+ |
| دبوس 5 | RA4 — Digital I/O / AN4 / OA3OUT |
| دبوس 6 | VDD — Power supply (3.0-3.6 V) |
| دبوس 7 | VCAP — Core logic decoupling cap |
| دبوس 8 | VSS — Ground reference |
| دبوس 9 | OSC1/CLKI — Crystal input / external clock |
| دبوس 10 | OSC2/CLKO — Crystal output / clock output |
| دبوس 11 | RB5 — Digital I/O / AN13 / PWM1H |
| دبوس 12 | RB6 — Digital I/O / AN14 / PWM1L |
| دبوس 13 | RB7 — Digital I/O / AN15 / PWM2H |
| دبوس 14 | RB8 — Digital I/O / AN16 / PWM2L |
| دبوس 15 | RB9 — Digital I/O / AN17 |
| دبوس 16 | PGEC1 — ICSP clock input |
| دبوس 17 | PGED1 — ICSP data input/output |
| دبوس 18 | RC0 — Digital I/O / PWM3H |
| دبوس 19 | RC1 — Digital I/O / PWM3L |
| دبوس 20 | RC2 — Digital I/O / PWM4H |
| دبوس 21 | RC3 — Digital I/O / PWM4L |
| دبوس 22 | RC4 — Digital I/O |
| دبوس 23 | RC5 — Digital I/O |
| دبوس 24 | RC6 — Digital I/O |
| دبوس 25 | RC7 — Digital I/O |
| دبوس 26 | RA7 — Digital I/O / AN7 |
| دبوس 27 | VSS — Ground reference |
| دبوس 28 | VDD — Power supply (3.0-3.6 V) |
التطبيقات النموذجية
PIC24EP256MC202-H/SO مناسب لـ 6 التطبيقs: BLDC / PMSM Sensorless Motor Control (FOC), Switched-Mode Power Supply (PFC + LLC), Solar / Photovoltaic Inverter Control, Uninterruptible Power Supply (UPS) and Inverter, Industrial Servo Drive with CAN Networking, Automotive Auxiliary Pump / Fan Motor Control.
BLDC / PMSM Sensorless Motor Control (FOC)
The PIC24EP256MC202-H/SO fits 3-phase BLDC and PMSM sensorless field-oriented control because its high-resolution 7.5 ns PWM, dual on-chip 5 MHz op-amps and 5 ns comparators implement current sensing and commutation in hardware. The 70 MIPS core runs the FOC and MTPA loops in well under 10 us. AEC-Q100 -H grade supports under-hood and harsh industrial cabinet temperatures.
موصى به
Switched-Mode Power Supply (PFC + LLC)
For digital PFC + LLC power supplies, the PIC24EP256MC202-H/SO drives the high-resolution PWM, samples the input voltage/current through its 1.1 Msps 10-bit ADC, and runs cycle-by-cycle control loops. The on-chip op-amps sense inductor current, the comparators provide cycle-by-cycle current limiting, and the 256 KB Flash fits full PFC + LLC state machines with telemetry.
موصى به
Solar / Photovoltaic Inverter Control
The PIC24EP256MC202-H/SO is well suited to small photovoltaic inverters and micro-inverters because the high-resolution PWM synchronizes MPPT switching, the dual op-amps measure PV string current, and the CAN/ECAN peripheral networks multiple inverter modules. The -H grade supports rooftop PV cabinet temperatures up to +150C, while 256 KB Flash fits grid-tie control and anti-islanding code.
موصى به
Uninterruptible Power Supply (UPS) and Inverter
In online UPS designs, the PIC24EP256MC202-H/SO runs the inverter control loop with the high-resolution PWM, monitors battery voltage/current with the on-chip op-amps, and orchestrates transfer between mains and battery via ECAN messaging to other cabinet modules. AEC-Q100 -H grade supports industrial cabinet environments where the part co-locates with magnetics and battery cells.
موصى به
Industrial Servo Drive with CAN Networking
For servo drives on a CANopen / DeviceNet industrial bus, the PIC24EP256MC202-H/SO combines the on-chip ECAN controller with the motor-control peripherals. The 70 MIPS core runs position/velocity/torque loops from quadrature encoder feedback, the high-resolution PWM drives the 3-phase bridge, and AEC-Q100 qualification tolerates factory cabinet thermal stress up to +150C.
موصى به
Automotive Auxiliary Pump / Fan Motor Control
Automotive auxiliary pumps, HVAC blowers and cooling fans use the PIC24EP256MC202-H/SO for AEC-Q100 qualified BLDC control on a 12 V bus. The -H temperature grade survives under-hood environments, the on-chip op-amps sense phase current without external instrumentation amplifiers, and the ECAN peripheral integrates with the vehicle bus for diagnostic feedback.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC24EP256MC202-H/SO — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC24EP256MC202-I/SO | PIC24EP128MC202-H/SO | PIC24EP256GP202-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC | 28-SOIC (same) | 28-SOIC (same) | 28-SOIC (same) |
| Core / MIPS | PIC24E 16-bit, 70 MIPS | PIC24E, 70 MIPS | PIC24E, 70 MIPS | PIC24E, 70 MIPS |
| Flash | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| Temperature Grade | -H, -40C to +150C, AEC-Q100 | -I, -40C to +85C, NOT automotive | -H, -40C to +150C, AEC-Q100 | -I, -40C to +85C, NOT automotive |
| High-resolution PWM (7.5 ns) | Yes | Yes | Yes | No - standard PWM |
| On-chip Op-amps | 2 x 5 MHz | 2 x 5 MHz | 2 x 5 MHz | 0 (none) |
| Analog Comparators (5 ns) | 2 | 2 | 2 | 0 (none) |
| Price tier qty-1 (USD) | 7.45 | 6.20 (approx) | 6.85 (approx) | 5.90 (approx) |
أبرز الفروقات
- AEC-Q100 -H grade in 28-SOIC (مقابلPIC24EP256MC202-I/SO)
- Motor-control peripherals integrated (مقابلPIC24EP256GP202-I/SO)
- 256 KB Flash for full motor + comms stack (مقابلPIC24EP128MC202-H/SO)
ملاحظات التصميم
Decouple VDD (pins 6 and 28) with a 10 uF bulk + 0.1 uF ceramic pair within 5 mm of the pins. Place a 1 uF ceramic on VCAP (pin 7) for the on-chip core LDO. Hold unused analog inputs at VSS to prevent cross-conduction. According to the Microchip PIC24EP256MC202 datasheet, brown-out reset must be left enabled at the BOR level matching your supply tolerance to avoid partial Flash writes during transient brown-out.
At 70 MIPS continuous operation with all peripherals active, the 28-SOIC package dissipation stays well under 1 W, but in a fully sealed under-hood automotive enclosure the junction-to-ambient thermal resistance (~70 C/W) can still push the die toward 110 C ambient. Provide copper pour on VDD/VSS planes and route thermal vias under the exposed thermal pad area where available. Use the -H grade's +150 C ceiling for derating.
Common pitfalls: (1) forgetting to configure unused comparators to a defined state can add 1-2 mA quiescent; (2) using a 20 MHz crystal with the 4x PLL when the design needs 70 MHz (use 10 MHz base); (3) leaving the ICSP pins PGEC1/PGED1 floating when not using debug (recommend 4.7 k pull-up to avoid spurious resets); (4) failing to clear the ADC channel selection after a sequence scan can yield phantom readings. Always refer to the Microchip errata document for the silicon revision you are using.
معلومات الامتثال
AEC-Q100 qualified per Microchip ordering information (automotive -H grade). RoHS compliant per Microchip product page.
