S9S08AW48E5VPUE - 8-bit S08 MCU, 48KB Flash, 40MHz, 64-LQFP | NXP
MPN: S9S08AW48E5VPUE ✗ انتهى عمره الإنتاجيS9S08AW48E5VPUE نظرة عامة
بدائل مباشرة لـ S9S08AW48E5VPUE — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع S9S08AW48E5VPUE (نفس عامل الشكل والبصمة) — يختلف في Package, Core, Operating Temperature Range, Debug Interface, ADC.
S9S08AW60E5MFGE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←S9S08AW32E5MPUE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC9S08AW48MFGE
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC9S08AW32MFGE
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←S9S08DZ96F2VLF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←S9S08AW48E5VPUE الحدود القصوى والخصائص الكهربائية
| Core Processor | S08 (HCS08) |
| Core Size | 8-Bit |
| CPU Speed | 40 MHz |
| Program Memory Size | 48 KB (48K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2 KB |
| Number of I/O | 54 |
| Connectivity | I2C, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| ADC Channels | Yes |
| جهد التغذية | 3 V |
| درجة حرارة التشغيل | -40C to +105C |
| العلبة | 64-LQFP (10x10 mm) |
| نوع التركيب | Surface Mount |
| Terminal Form | GULL WING |
| Automotive Qualified | Yes |
| Series | S08 |
تكوين أطراف S9S08AW48E5VPUE
| دبوس 1 | PTE5/TPM1CH1 — Port E bit 5 / TPM1 channel 1 |
| دبوس 2 | PTE4/TPM1CH0 — Port E bit 4 / TPM1 channel 0 |
| دبوس 3 | PTE3/SPSCK1 — Port E bit 3 / SPI1 SPSCK |
| دبوس 4 | PTE2/MOSI1 — Port E bit 2 / SPI1 MOSI |
| دبوس 5 | PTE1/MISO1 — Port E bit 1 / SPI1 MISO |
| دبوس 6 | PTE0/TxD1 — Port E bit 0 / SCI1 TxD |
| دبوس 7 | VDD — Supply voltage (3V) |
| دبوس 8 | VSS — Ground |
| دبوس 9 | PTA0 — Port A bit 0 |
| دبوس 10 | PTA1 — Port A bit 1 |
| دبوس 11 | PTA2 — Port A bit 2 |
| دبوس 12 | PTA3 — Port A bit 3 |
| دبوس 13 | PTA4 — Port A bit 4 |
| دبوس 14 | PTA5/IRQ — Port A bit 5 / external interrupt |
| دبوس 15 | PTA6 — Port A bit 6 |
| دبوس 16 | PTA7 — Port A bit 7 |
| دبوس 17 | PTB0/AD0 — Port B bit 0 / ADC channel 0 |
| دبوس 18 | PTB1/AD1 — Port B bit 1 / ADC channel 1 |
| دبوس 19 | PTB2/AD2 — Port B bit 2 / ADC channel 2 |
| دبوس 20 | PTB3/AD3 — Port B bit 3 / ADC channel 3 |
| دبوس 21 | PTB4/AD4 — Port B bit 4 / ADC channel 4 |
| دبوس 22 | PTB5/AD5 — Port B bit 5 / ADC channel 5 |
| دبوس 23 | PTB6/AD6 — Port B bit 6 / ADC channel 6 |
| دبوس 24 | PTB7/AD7 — Port B bit 7 / ADC channel 7 |
| دبوس 25 | PTC0/SCL — Port C bit 0 / I2C SCL |
| دبوس 26 | PTC1/SDA — Port C bit 1 / I2C SDA |
| دبوس 27 | PTC2 — Port C bit 2 |
| دبوس 28 | PTC3 — Port C bit 3 |
| دبوس 29 | PTC4 — Port C bit 4 |
| دبوس 30 | PTC5 — Port C bit 5 |
| دبوس 31 | PTC6 — Port C bit 6 |
| دبوس 32 | PTC7 — Port C bit 7 |
| دبوس 33 | PTD0 — Port D bit 0 |
| دبوس 34 | PTD1 — Port D bit 1 |
| دبوس 35 | PTD2 — Port D bit 2 |
| دبوس 36 | PTD3 — Port D bit 3 |
| دبوس 37 | PTD4/TPM2CH1 — Port D bit 4 / TPM2 channel 1 |
| دبوس 38 | PTD5/TPM2CH0 — Port D bit 5 / TPM2 channel 0 |
| دبوس 39 | PTD6 — Port D bit 6 |
| دبوس 40 | PTD7 — Port D bit 7 |
| دبوس 41 | PTE6 — Port E bit 6 |
| دبوس 42 | PTE7 — Port E bit 7 |
| دبوس 43 | VBAT — Battery supply input |
| دبوس 44 | VREFH — ADC voltage reference high |
| دبوس 45 | VREFL — ADC voltage reference low |
| دبوس 46 | VDD — Supply voltage (3V) |
| دبوس 47 | VSS — Ground |
| دبوس 48 | XTAL — External crystal input |
| دبوس 49 | EXTAL — External crystal/clock input |
| دبوس 50 | RST — Reset input (active low) |
| دبوس 51 | BKGD/MS — Background debug / mode select |
| دبوس 52 | PTF0 — Port F bit 0 |
| دبوس 53 | PTF1 — Port F bit 1 |
| دبوس 54 | PTF2 — Port F bit 2 |
| دبوس 55 | PTF3 — Port F bit 3 |
| دبوس 56 | PTF4 — Port F bit 4 |
| دبوس 57 | PTF5 — Port F bit 5 |
| دبوس 58 | PTF6 — Port F bit 6 |
| دبوس 59 | PTF7 — Port F bit 7 |
| دبوس 60 | PTG0 — Port G bit 0 |
| دبوس 61 | PTG1 — Port G bit 1 |
| دبوس 62 | PTG2 — Port G bit 2 |
| دبوس 63 | PTG3 — Port G bit 3 |
| دبوس 64 | NC — Not connected (per datasheet) |
التطبيقات النموذجية
S9S08AW48E5VPUE مناسب لـ 7 التطبيقs: Automotive HVAC Control Module, Instrument Cluster Display Driver, Industrial Sensor Hub Node, Automotive Lighting Controller, BLDC Motor Controller (Low-Power), Automotive Seat/Window Module, Battery-Powered IoT Sensor Node.
Automotive HVAC Control Module
The S9S08AW48E5VPUE is well-suited for automotive HVAC control modules because it provides 48KB flash for cabin temperature control firmware, integrated PWM channels for blower motor speed control, and ADC channels for temperature sensor inputs. Its -40C to +105C automotive temperature grade supports under-dash mounting where ambient temperatures exceed consumer-grade limits. The S08 core runs a real-time control loop at 40MHz, easily handling PID algorithms for blend-door actuators while the SCI peripheral interfaces with the vehicle CAN gateway. Compared to a step-up to ARM Cortex-M0, the S08 reduces BOM cost in this price-sensitive HVAC body controller segment.
موصى به
Instrument Cluster Display Driver
The S9S08AW48E5VPUE drives automotive instrument clusters by reading vehicle speed, RPM, fuel level, and temperature sensor inputs through its ADC channels while generating stepper motor drive signals through PWM outputs for analog gauge needles. The 54 GPIO pins accommodate multiple gauge drivers, warning lamp outputs, and display multiplex control signals. The 48KB flash supports cluster graphics libraries and diagnostic routines, while the 2KB RAM handles display refresh buffers. The S08 core's deterministic interrupt response ensures accurate gauge sweep timing without lag.
موصى به
Industrial Sensor Hub Node
Industrial sensor hub nodes leverage the S9S08AW48E5VPUE's I2C and SPI connectivity to aggregate data from multiple environmental sensors and forward processed readings via SCI to a higher-level controller. The 48KB flash supports Modbus RTU protocol stack and sensor calibration tables. The ADC peripheral digitizes analog 4-20mA current loop inputs from legacy industrial transmitters. The -40C to +105C temperature range handles factory floor and outdoor cabinet installations, while PWM channels drive local indicator LEDs and buzzer alarm outputs.
موصى به
Automotive Lighting Controller
Headlamp and interior lighting controllers use the S9S08AW48E5VPUE's PWM channels to generate PWM-dimmed LED drive signals for DRL, tail lamps, and ambient lighting strips. The 48KB flash accommodates lighting pattern libraries including welcome/goodbye sequences and adaptive headlamp logic. The SCI peripheral receives lighting commands from the body control module, while the WDT ensures the lighting controller recovers from firmware faults within the automotive safety window. The 64-LQFP package provides sufficient GPIO for multiple lighting zones.
موصى به
BLDC Motor Controller (Low-Power)
Low-power brushless DC motor controllers for fans, pumps, and small actuators use the S9S08AW48E5VPUE's PWM channels to generate 6-step or FOC commutation signals, while the ADC samples back-EMF or current shunt feedback for closed-loop speed control. The S08 core's 40MHz operation handles trapezoidal commutation at PWM frequencies up to 20kHz without missing interrupts. The 48KB flash supports sinusoidal startup and fault-recovery routines. With automotive temperature rating, the same firmware serves both EV auxiliary pumps and industrial cooling fans.
موصى به
Automotive Seat/Window Module
Body control modules for power seats, windows, and mirrors use the S9S08AW48E5VPUE as the main controller, switching motor drivers via GPIO and PWM while monitoring end-stop and anti-pinch current sensors through the ADC. The 54 GPIO pins support multi-motor coordination plus LIN network communication. Flash memory holds the seat memory position profiles, anti-pinch calibration data, and LIN diagnostic handlers. The 64-LQFP package fits within the seat module housing while maintaining automotive temperature qualifications.
موصى به
Battery-Powered IoT Sensor Node
Battery-powered IoT sensor nodes can leverage the S9S08AW48E5VPUE's low-power modes and integrated peripherals to read sensors, transmit via I2C/SPI to a radio module, and return to sleep. The 48KB flash accommodates sensor fusion algorithms and over-the-air update bootloaders. ADC channels digitize battery voltage and sensor signals. Although the LQFP-64 package is larger than typical IoT solutions, this part fits industrial-grade IoT installations where ruggedness outweighs size constraints, and the wide temperature rating supports outdoor deployment.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ S9S08AW48E5VPUE — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | S9S08AW60E5MFGE | S9S08AW32E5MPUE | MC9S08AW48MFGE | MC9S08AW32MFGE | S9S08DZ96F2VLF |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Core | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit |
| CPU Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Size | 48 KB | 60 KB | 32 KB | 48 KB | 32 KB | 96 KB |
| RAM Size | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 3 KB |
| Number of I/O | 54 | 54 | 54 | 54 | 54 | 54 |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +125C | -40C to +105C |
أبرز الفروقات
- Higher flash capacity than MC9S08AW32MFGE variant (مقابلMC9S08AW32MFGE)
- Active lifecycle status vs this part's EOL status (مقابلMC9S08AW48MFGE)
- Larger flash with additional MSCAN peripheral for CAN networking (مقابلS9S08DZ96F2VLF)
ملاحظات التصميم
The S9S08AW48E5VPUE is in NXP's End of Life transition per the manufacturer product page. New designs should use the MC9S08AW48MFGE or migrate to the S08 DZ family. For designs already in production, plan a last-time-buy before the discontinuation cut-off date. Verify the PCN (Product Change Notice) timeline with your NXP FAE before committing to a new program on this part number.
The 64-LQFP package requires careful PCB layout. Place decoupling capacitors (100nF ceramic + 10uF bulk) within 5mm of each VDD/VSS pin pair. Keep the XTAL/EXTAL traces short and shielded with a guard ground to prevent clock corruption. Use a 4-layer PCB with continuous ground plane for best EMI performance on automotive designs.
The S9S08AW48E5VPUE operates from a single 3V supply rail; ensure the regulator provides at least 50mA headroom above the maximum MCU load plus peripheral current. Add a 10kohm pull-up on the RST pin and a low-pass RC filter on VBAT to prevent spurious resets. The integrated LVD (Low Voltage Detect) module can be used for brown-out protection by setting the LVD trip point above the minimum operating voltage.
معلومات الامتثال
Automotive qualified per NXP product page. RoHS/REACH compliance inferred from LQFP packaging standards; specific compliance certificates should be downloaded from NXP product page.