SI3016-F-FS - 3.3V 16-SOIC Global DAA | Silicon Labs
MPN: SI3016-F-FS ✓ نشطSI3016-F-FS نظرة عامة
A direct access arrangement is the line-side interface between a voice codec or modem and the analog telephone network. It controls line voltage and loop current while providing the ringing, speech-path, and off-hook functions required by global PSTN equipment. Integrating these functions reduces the need for a discrete analog front end, isolation transformer, relays, opto-isolators, and a separate two-wire to four-wire hybrid.
The SI3016-F-FS operates from a 3.3 V supply and is specified for 3.2 dBm transmit and receive levels. Its parallel handset-detection function supports parallel off-hook sensing, while the overload-protection feature limits the effect of excessive line voltage. The on-hook line-monitor current is specified at 7 microamperes, helping the host system determine line state with low standby consumption.
The programmable line interface is the key architectural feature. Registers allow the host processor to configure operating characteristics instead of relying on a large collection of discrete analog networks. This makes the SI3016-F-FS suitable for designs in which the same line interface must serve multiple international telephone-network requirements or be adjusted during production and test.
Typical applications include Voice over IP terminal adapters, voice gateways, PBX line cards, fax and multifunction-printer interfaces, data modems, and embedded telephone equipment. The device is also useful in legacy fax machines and other products that retain a copper-loop connection while using a digital processor for call control and audio processing.
Designers should follow the Silicon Labs si3016 datasheet for the line-termination network, external component values, hook-state timing, and PCB layout. Keep sensitive analog and telephone-network nodes away from high-current digital paths, and place line-interface and bypass components close to their associated pins to reduce coupling and ringing.
This page consolidates the device function, verified distributor availability, same-family alternatives, and practical integration considerations. It supports faster component selection for engineers designing compact, programmable telephone line interfaces without treating the DAA as a generic modem block.
بدائل مباشرة لـ SI3016-F-FS — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع SI3016-F-FS (نفس عامل الشكل والبصمة) — يختلف في Product Type, Line Interface, Package, Handset Detection, On-Hook Line Monitor Current.
SI3016-BS
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3016-F-FSR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3016-FS
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3016-F-FS المواصفات
| Product Type | Enhanced global direct access arrangement (DAA) |
| جهد التغذية | 3.3 V |
| العلبة | 16-pin small outline package (16-SOIC) |
| Line Interface | Programmable |
| Transmit Level | 3.2 dBm |
| Receive Level | 3.2 dBm |
| On-Hook Line Monitor Current | 7 microamperes |
| Line Voltage Monitor | Integrated |
| Loop Current Monitor | Integrated |
| Handset Detection | Parallel detection |
| Overload Protection | Integrated |
| Telephone Network Support | Global line-side interface |
| Modem Classification | V.90 line-side modem interface |
| External Hybrid Requirement | No discrete two-wire to four-wire hybrid required |
| نوع التركيب | Surface mount |
دليل تكوين أطراف SI3016-F-FS 16-pin small outline package (16-soic)
تكوين الأطراف لـ SI3016-F-FS (حزمة 16-pin small outline package (16-soic)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SI3016-F-FS.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
SI3016-F-FS مناسب لـ 6 التطبيقs: Voice over IP Terminal Adapter, PBX Line Card, Analog Fax Machine Interface, Analog Data Modem, Legacy Voice Gateway, Multifunction Printer Fax Module.
Voice over IP Terminal Adapter
The SI3016-F-FS fits the analog line side of a Voice over IP terminal adapter because its 3.3 V supply, 7 microampere on-hook line-monitor current, and parallel handset detection suit low-power embedded voice systems. Place the device between the host codec or modem and the external telephone-network interface to monitor line voltage and loop current. Unlike a discrete implementation, the integrated DAA removes the separate analog front end, isolation transformer, relays, opto-isolators, and two-wire to four-wire hybrid. The programmable line interface also allows one board layout to be configured for different regional line-network requirements. Confirm host firmware support for the SI3016 register set and follow the manufacturer line-network and protection recommendations during PCB layout.
موصى به
PBX Line Card
A PBX line card can use the SI3016-F-FS to convert each analog PSTN connection into a digital voice-channel interface. The integrated line-voltage monitor, loop-current monitor, parallel handset detection, and overload protection reduce the component count required per channel. Its programmable line interface is particularly useful in multi-region systems where line characteristics can be adjusted through the host controller. The 3.2 dBm transmit and receive levels should be checked against the codec and line-network design. Keep telephone-network traces separated from digital signals, apply the protection network specified by the manufacturer, and replicate the reference layout consistently across the card.
موصى به
Analog Fax Machine Interface
The SI3016-F-FS is suitable for the line interface in an analog fax machine because it combines line supervision, overload protection, and handset detection in a 16-pin package. These functions allow the fax controller to determine when the remote endpoint goes off hook and respond to line-state changes without a large collection of discrete circuits. The device also supports the transmit and receive levels required by an integrated voice modem path. Use the manufacturer recommendations for the external line network, ring-detection timing, and protection components. Because the Si3016 family includes several ordering suffixes, confirm the required supply, regional configuration, and firmware support before releasing a production PCB.
موصى به
Analog Data Modem
The SI3016-F-FS provides the line-side DAA functions required by a V.90-class analog modem while reducing the discrete component count. Integrated line-voltage and loop-current monitoring support modem handshake and call-progress control, while parallel handset detection identifies an off-hook condition. At 3.3 V, the device is appropriate for modems built around modern embedded processors and mixed-signal codecs. Place the DAA close to the line-interface components and keep the telephone-network side isolated from high-current switching nodes. Verify the modem firmware supports the programmable configuration and confirm the specified 3.2 dBm transmit and receive levels against the complete analog signal path.
موصى به
Legacy Voice Gateway
A legacy voice gateway that bridges PSTN calls to IP networks can use the SI3016-F-FS as the analog-facing DAA. Its programmable line interface, line-state monitors, and overload protection concentrate the key telephone-line functions into a single 16-pin device, allowing the gateway to reuse an existing analog front end design. The 7 microampere on-hook monitor current supports low-power channel monitoring when multiple gateways or line cards are deployed. Use the manufacturer external-network schematic for isolation and surge handling, and validate line-state timing with the host firmware. Configuration differences between Si3016 suffixes must be resolved before a board built for one suffix is reused for another.
موصى به
Multifunction Printer Fax Module
The SI3016-F-FS can serve the analog fax path in a multifunction printer when the product retains a telephone connection for receiving legacy fax calls. Parallel handset detection and integrated line-state monitoring allow the printer controller to identify line activity without a separate relay-based detection circuit. The 16-pin package limits board area, while the 3.3 V operating supply matches many embedded printer controllers. Follow the manufacturer recommendations for the line-termination network and telephone transient protection, and keep the fax modem path isolated from switching power converters and display circuitry. Confirm that the printer firmware supports the exact Si3016 configuration and line-region requirements.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ SI3016-F-FS — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | SI3016-BS | SI3016-F-FSR | SI3016-FS |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Skyworks Solutions Inc. | Texas Instruments |
| Package | 16-SOIC | 16-SOIC - same footprint | 16-SOIC - same footprint | 16-SOIC - same footprint |
| Product Type | Enhanced global direct access arrangement | Si3016 direct access arrangement | Si3016 direct access arrangement | Modem line-side interface |
أبرز الفروقات
- Provides an enhanced global DAA with several line functions consolidated in one package (مقابلSI3016-FS)
- Matches the established Si3016 16-SOIC mechanical format (مقابلSI3016-BS)
- Operates directly from a 3.3 V system rail (مقابلSI3016-F-FSR)
ملاحظات التصميم
Implement the telephone-network side using the reference layout in the Silicon Labs si3016 datasheet. Keep the line-voltage and loop-current sensing paths away from switching-node traces, processor clock signals, and the DAA supply return. Place external line-interface components close to their associated device pins, and route sensitive analog nodes as short as practical to reduce susceptibility to radiated and conducted coupling.
Do not select a substitute solely because it uses a 16-SOIC package. The SI3016 ordering suffixes can identify different supply, configuration, and packing arrangements. Before reusing a PCB or changing the installed part, compare the ordering guide, supply voltage, register configuration, host firmware support, line-network requirements, and lifecycle status. A footprint match establishes mechanical feasibility, not guaranteed functional equivalence.
Follow the manufacturer's recommended supply decoupling and bypass layout for the 3.3 V DAA supply. Telephone-interface transients can disturb the device even when the host logic operates from the same rail. Provide the specified protection and isolation components at the line-network boundary, keep their return currents away from sensitive signal grounds, and test hook detection and overload recovery under worst-case line conditions.
Validate line-state timing and parallel handset detection with the host firmware rather than relying only on nominal timing from a generic interface description. The 7 microampere on-hook monitor current provides a low-power state indication, but actual detection behavior also depends on the external line network, loop current, and regional telephone parameters. Use production test fixtures that reproduce the intended line conditions.
معلومات الامتثال
The SI3016-F-FS is a telephone line-side interface IC rather than an automotive-qualified device. Compliance declarations were not identified for this ordering code and should be confirmed with the manufacturer before a regulated production release.