STM32F031F6P6 - 32-Bit 48MHz MCU, 32KB Flash | STMicroelectronics
MPN: STM32F031F6P6 ✓ نشطSTM32F031F6P6 نظرة عامة
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals on one die. The STM32F0 family combines an ARM Cortex-M0 RISC core with embedded Flash and SRAM in the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. The STM32F031F6P6 is suited to applications that need deterministic control rather than a high-performance desktop-class processor.
Key features include a 32-bit Cortex-M0 core operating at up to 48 MHz, 32 KB of Flash memory, and nine timers. The device also integrates an ADC and communication peripherals, as identified by the manufacturer documentation. Its 20-TSSOP package supports compact surface-mount PCB layouts. The P6 ordering code identifies this exact package configuration, so footprint and device-specific requirements should be checked against the manufacturer pin definition before layout release.
Technically, the Cortex-M0 architecture provides a simple instruction set and deterministic execution suitable for control logic, monitoring, and low-to-moderate data-processing tasks. The 48 MHz operating point gives the core more performance headroom than many basic 8-bit alternatives while retaining a small, accessible embedded platform. Peripheral integration also reduces the number of separate analog and timing components required in a typical embedded control design.
Typical applications include industrial sensor controllers, compact automation modules, battery-powered monitoring equipment, lighting controls, small motor-control subsystems, and consumer accessories. An ADC supports analog input measurement, while the timer resources can be used for timing, pulse generation, and periodic control functions.
For PCB design, use the manufacturer's 20-pin TSSOP land pattern and pin descriptions, place decoupling capacitors close to the power pins, and keep sensitive analog routing away from fast switching nodes. Confirm the exact pin assignments, peripheral multiplexing, clock configuration, and unused-pin requirements in the manufacturer datasheet before production.
This page organizes the device identity, package information, verified manufacturer and distributor references, commercially relevant sourcing answers, candidate drop-in alternatives, and engineering-focused selection guidance into a concise resource for embedded-product designers.
بدائل مباشرة لـ STM32F031F6P6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع STM32F031F6P6 (نفس عامل الشكل والبصمة) — يختلف في Package, Flash Memory, Maximum CPU Frequency, Product Type, ADC Resolution.
HK32F031F6P6
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
STM32F030F4P6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F031F6P6 الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| Processor Core | ARM Cortex-M0 32-bit RISC |
| Number of Timers | 9 timers |
| ADC | Integrated analog-to-digital converter |
| العلبة | 20-pin TSSOP, 4.40 mm body width |
| نوع التركيب | Surface mount |
| جهد التغذية | 2.5 V to 3.3 V |
| Program Memory Type | Flash |
دليل تكوين أطراف STM32F031F6P6 20-pin tssop, 4.40 mm body width
تكوين الأطراف لـ STM32F031F6P6 (حزمة 20-pin tssop, 4.40 mm body width). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM32F031F6P6.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
STM32F031F6P6 مناسب لـ 6 التطبيقs: Industrial Sensor Controller, Battery-Powered Monitoring Device, LED Lighting Controller, Small Motor-Control Subsystem, Compact Automation Module, Consumer Accessory Controller.
Industrial Sensor Controller
The STM32F031F6P6 fits compact industrial sensing modules because its ARM Cortex-M0 core runs at up to 48 MHz while the integrated ADC supports direct acquisition of analog sensor signals. Its 32 KB Flash supports embedded control firmware without requiring a separate processor. The 20-pin TSSOP also limits board footprint for distributed sensor nodes. Confirm the ADC accuracy, input range, clock tolerance, and environmental qualification against the plant operating conditions before deployment.
موصى به
Battery-Powered Monitoring Device
The STM32F031F6P6 can serve as the control core in a battery-powered monitor because it combines a 48 MHz 32-bit processor, 32 KB Flash, timers, and an ADC in a single 20-pin TSSOP device. Peripheral integration allows a design to sample a sensor, apply control logic, and manage scheduled measurements without a separate ADC. Low-power behavior and current consumption should be measured in the intended operating modes, since sleep-state requirements are not established by the headline CPU frequency.
موصى به
LED Lighting Controller
The STM32F031F6P6 is appropriate for LED timing and lighting-control boards because its nine timers can support periodic events, dimming sequences, and fault-timing functions while the 48 MHz Cortex-M0 core handles control logic. The integrated ADC can monitor a light-level or supply-derived analog signal. Place the MCU and its decoupling close to the power-control circuitry, and isolate LED switching paths to prevent rapid current edges from disturbing analog measurements or clock integrity.
موصى به
Small Motor-Control Subsystem
The STM32F031F6P6 can coordinate low-complexity motor functions where its 48 MHz Cortex-M0 performance and nine timers are sufficient for command decoding, timing, and supervisory control. The ADC may be used to monitor current or position-related analog signals, while communication peripherals support external command interfaces. A separate power stage remains necessary, and the complete design must verify current limits, protection behavior, thermal performance, and the timing margin required by the motor-load profile.
موصى به
Compact Automation Module
The STM32F031F6P6 works well as the local controller in a compact automation module because it combines an ADC, multiple timers, communication functions, and 32 KB Flash in a 20-pin TSSOP package. Designers can implement state-machine logic, periodic sampling, and external-device communication without a separate logic device. The relatively modest memory footprint calls for disciplined code sizing, while the small package helps reduce board area in space-constrained control modules.
موصى به
Consumer Accessory Controller
The STM32F031F6P6 is suitable for a compact consumer accessory requiring a 32-bit control core, analog input, timers, and serial connectivity in a small surface-mount package. It can manage buttons, indicators, sensors, and configurable product behavior within a 32 KB Flash budget. For production, validate ESD robustness, power-consumption behavior, peripheral mapping, and firmware update requirements against the product's user environment. Its 4.40 mm wide TSSOP body also supports dense consumer-electronics layouts.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ STM32F031F6P6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | HK32F031F6P6 | STM32F030F4P6 |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | STMicroelectronics | Hong Kong Semiconductor | STMicroelectronics |
| Processor Core | 32-bit ARM Cortex-M0 RISC | Cortex-M0-compatible implementation | 32-bit ARM Cortex-M0 RISC |
| Hardware and Software Compatibility | STMicroelectronics STM32F0 reference device | Compatibility claimed; ADC, clock, and low-power behavior require validation | Related STM32F0 device; feature and memory differences require review |
أبرز الفروقات
- Direct STMicroelectronics ecosystem support (مقابلHK32F031F6P6)
- Higher documented Flash capacity than the related STM32F030 family alternative (مقابلSTM32F030F4P6)
- Integration for compact embedded-control designs (مقابلSTM32F030F4P6)
ملاحظات التصميم
Use the manufacturer land pattern for the 20-pin TSSOP rather than adapting a footprint from another STM32F0 ordering code. Place required decoupling capacitors adjacent to the corresponding supply pins and provide a short return path to the device ground. Confirm exposed versus non-exposed package variants and pin orientation in the manufacturer package drawing before releasing artwork.
Keep analog-sensor traces short and route them away from LED, motor, and switching-regulator nodes. If the ADC is used for precision measurements, provide a stable local reference arrangement and consider filtering at the analog input. The presence of an ADC does not remove the need to verify input range, source impedance, acquisition time, and the effect of board leakage.
Do not substitute another STM32F0 MPN solely because the package count matches. Compare Flash, SRAM, peripheral mapping, clock limits, pin multiplexing, and boot behavior in the manufacturer documentation. The STM32F030F4P6 is a related same-package device, but its F030 identity indicates that the memory and feature set must be checked against the intended application.
Design the supply for the documented 2.5 V to 3.3 V operating range and account for startup current, peripheral activity, and I/O loading at the 48 MHz operating point. Place bulk and high-frequency decoupling according to the manufacturer's guidance. Validate the power tree under worst-case radio-frequency activity rather than relying only on a no-load current measurement.
معلومات الامتثال
The retrieved component listings do not provide sufficiently explicit compliance values for extraction. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status using the manufacturer's current product documentation before procurement.