STM32L496VET6 - 80MHz 512KB Cortex-M4 | STMicroelectronics
MPN: STM32L496VET6 ✓ نشطSTM32L496VET6 نظرة عامة
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one compact device. The STM32L4 family belongs to the embedded-processing hierarchy of 32-bit MCU, Arm Cortex-M core, RISC processor, and embedded semiconductor. Its combination of processing performance and low-power operating modes suits products that need local control, communications, data acquisition, and user-interface support without a separate processor.
Key features include an 80 MHz Arm Cortex-M4 core with FPU, 512 KB of Flash, a 1.71 V to 3.6 V operating supply range, and FlexPowerControl for low-power operation. The device also supports USB OTG FS, 12-bit ADC channels, LCD interfaces, audio functions, HASH, and external switched-mode power-supply support. These resources consolidate several embedded functions into one package while reducing external component count.
The STM32L496VET6 provides up to 100 DMIPS through the STM32L496xx architecture. Its low-power modes are important for battery-operated and intermittently powered equipment: shutdown consumption reaches 25 nA, while VBAT mode consumes 320 nA while maintaining RTC operation and 32 x 32-bit backup registers. The processor's FPU accelerates floating-point calculations used in control loops, signal processing, and data formatting without requiring a separate DSP.
Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, LCD-equipped human-interface panels, low-power edge instruments, portable measurement products, and compact embedded control systems. USB OTG FS is particularly useful for configuration, data transfer, and USB-hosted peripheral connectivity, while the LCD and audio interfaces support human-facing products.
Design the power tree around the 1.71 V to 3.6 V operating range and account for startup, sleep, and shutdown current when estimating battery life. Place decoupling capacitors close to the supply pins, route USB differential signals with controlled impedance, and consult the manufacturer pin-definition table before assigning every 100-pin LQFP connection.
This product page combines the manufacturer's core electrical specifications, package details, application guidance, qualified same-family alternatives, and practical PCB considerations. It supports faster part selection by organizing memory, core performance, low-power modes, interface capabilities, and replacement considerations in one engineering-focused reference.
بدائل مباشرة لـ STM32L496VET6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع STM32L496VET6 (نفس عامل الشكل والبصمة) — يختلف في Package, Flash Memory, Processor Core, ADC Resolution, Flash Organization.
STM32L496VET3
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
STM32L4A6VET6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
STM32L496VET6 الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Maximum Performance | 100 DMIPS |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| جهد التغذية التشغيلي | 1.71 V to 3.6 V |
| ADC Resolution | 12 bits |
| USB Interface | USB OTG FS |
| VBAT Mode Current | 320 nA |
| Shutdown Mode Current | 25 nA |
| Shutdown Wakeup Sources | 5 wakeup pins |
| RTC Backup Registers | 32 x 32 bits |
| العلبة | 100-pin LQFP, 14 x 14 mm |
| نوع التركيب | Surface mount |
| Temperature Range | -40°C to +85°C |
| Power Management | FlexPowerControl |
| External SMPS Support | Supported |
| حالة RoHS | Compliant |
| REACH Status | Compliant |
| Moisture Sensitivity Level | MSL 3 |
دليل تكوين أطراف STM32L496VET6 100-pin lqfp, 14 x 14 mm
تكوين الأطراف لـ STM32L496VET6 (حزمة 100-pin lqfp, 14 x 14 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM32L496VET6.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
STM32L496VET6 مناسب لـ 6 التطبيقs: Industrial Sensor Controller, USB Data-Acquisition Equipment, LCD Human-Interface Panel, Portable Measurement Instrument, Low-Power Edge Monitor, Embedded Audio Control System.
Industrial Sensor Controller
The STM32L496VET6 fits industrial sensor controllers that combine analog measurement, local processing, and communications in one compact module. Its 12-bit ADC channels support sensor acquisition, while the 80 MHz Arm Cortex-M4 core with FPU provides up to 100 DMIPS for filtering, calibration, and control calculations. The 1.71 V to 3.6 V operating range supports compact industrial systems, while FlexPowerControl and the 25 nA shutdown specification improve standby power behavior. Firmware should use the low-power modes only after confirming sensor warm-up and acquisition timing.
USB Data-Acquisition Equipment
USB OTG FS makes the STM32L496VET6 appropriate for connected data-acquisition products that transfer measurements to a host computer. The 80 MHz Cortex-M4 processor can perform real-time sampling support and signal conditioning, while 512 KB of Flash provides room for control code, drivers, and communication stacks. Its 12-bit ADC channels reduce the need for separate converters in moderate-resolution instrumentation. Designers should budget CPU time for filtering and USB scheduling, and route the USB interface according to the manufacturer layout guidance.
LCD Human-Interface Panel
The STM32L496VET6 supports LCD-equipped control panels because the STM32L496xx family includes LCD interface capability alongside 512 KB of Flash and 80 MHz processing speed. A single MCU can drive a display, scan controls, update status indicators, and supervise a connected peripheral bus. Its 100-pin LQFP package provides a substantial pin count for display, keypad, communications, and expansion functions. The selected LCD controller interface, timing requirements, and alternate-function mapping must be checked against the device pin-definition table before layout release.
Portable Measurement Instrument
Battery-powered measurement instruments benefit from the STM32L496VET6 combination of 512 KB of Flash, 12-bit conversion capability, FlexPowerControl, and extremely low shutdown current. The processor can coordinate acquisition, calculation, display updates, and data logging, while shutdown mode reaches 25 nA for systems that spend most of their time dormant. The 320 nA VBAT mode can preserve RTC operation and 32 x 32-bit backup registers. A realistic battery-life calculation must include sensor current, regulator efficiency, wake frequency, and time spent in active and sleep states.
Low-Power Edge Monitor
The STM32L496VET6 is suitable for compact edge-monitoring devices that periodically sample sensors and communicate collected information. Its 80 MHz Cortex-M4 FPU can execute filtering and compensation algorithms, while USB OTG FS provides a wired configuration or data path. Low-power shutdown at 25 nA and VBAT operation at 320 nA allow the monitor to preserve state between measurement intervals. Duty-cycle design should prevent data loss by scheduling sensor warm-up, sampling, processing, and communication before the controller returns to its low-power state.
Embedded Audio Control System
The STM32L496VET6 can serve as the control processor in compact embedded audio systems that need local commands, display feedback, communications, and real-time peripheral management. Its 80 MHz Cortex-M4 core with FPU handles control and signal-processing tasks, while the STM32L496xx feature set includes audio support and USB OTG FS. The 512 KB Flash capacity accommodates firmware, configuration data, and interface layers. Audio-clock design, codec communication, DMA use, and low-power transitions must be implemented according to the manufacturer reference material to prevent unintended clock or bus activity.
بيانات مرجعية هندسية لـ STM32L496VET6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | STM32L496VET3 | STM32L4A6VET6 |
|---|---|---|---|
| Package | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB |
| Operating Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| USB Interface | USB OTG FS | USB OTG FS | USB OTG FS |
| Low-Power Control | FlexPowerControl | FlexPowerControl | FlexPowerControl |
| External SMPS Support | Supported | Supported | Supported |
أبرز الفروقات
- Higher embedded processing performance (مقابلSTM32L4A6VET6)
- Integrated USB and rich low-power peripherals (مقابلSTM32L496VET3)
- Local control with 512 KB Flash (مقابلSTM32L496VET3)
ملاحظات التصميم
Design the supply network for the complete 1.71 V to 3.6 V operating range and place the required decoupling capacitors immediately beside the corresponding power and ground pins. Keep high-current return paths compact so switching noise does not contaminate analog or USB-adjacent circuitry. If external SMPS support is used, follow the manufacturer reference configuration for power sequencing and voltage ramp requirements rather than treating SMPS and direct-supply modes as electrically identical.
Assign all 100 physical pins from the STM32L496VET6 pin-definition table rather than from a generic STM32L4 symbol. Verify power pins, ground pins, analog inputs, alternate functions, debug signals, USB connections, and boot-related assignments against the exact ordering code. A footprint match alone does not prove functional pin compatibility, especially when alternate functions or peripheral instances change between devices.
Route USB differential signals as a controlled-impedance pair with continuous reference-plane support and minimize stubs and branch points. Keep the MCU and supporting clocks or power-conversion components positioned to meet the timing and current requirements in the manufacturer layout guidance. Analog inputs require short, shielded routes away from switching nodes, while oscillator and high-speed interface areas should avoid noisy power-regulator and digital-clock regions.
Do not assume that every STM32L4 MCU with the same package and frequency is interchangeable. Firmware startup code, interrupt mapping, peripheral instances, security configuration, clock-tree behavior, and device identifiers can differ even when the physical outline matches. Before substituting a candidate, compare the exact pin table, electrical characteristics, memory configuration, peripheral requirements, and application code, then perform hardware and firmware regression testing.
معلومات الامتثال
RoHS and REACH compliance are identified in the product compliance records. The component is listed at MSL 3. No AEC-Q100 qualification, halogen-free declaration, or conflict-minerals declaration was established for this exact ordering code.