TLV27L1CD - 16V, 160kHz Rail-to-Rail Op Amp | TI
MPN: TLV27L1CD ✓ نشطTLV27L1CD نظرة عامة
An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its non-inverting and inverting inputs. Within the broader semiconductor hierarchy, the TLV27L1CD belongs to the linear-amplifier family and the amplifier-IC category. Its low supply current and compact SOIC footprint make it useful for battery-powered equipment, portable instrumentation, sensor interfaces, and low-power control systems where a general-purpose precision amplifier is required.
Key features include rail-to-rail output, a 160 kHz gain-bandwidth product, operation from 2.7 V to 16 V, and low quiescent current. The 160 kHz bandwidth supports moderate-frequency signal conditioning without requiring a high-speed operational-amplifier architecture. Rail-to-rail output increases headroom at low supply voltages, while the SOIC package supports conventional surface-mount assembly and prototyping workflows.
The TLV27L1 family is positioned as a micropower, low-voltage alternative to the TLC and V225x families when offset and noise are not the primary selection criteria. Texas Instruments states that the TLV27L1/2 devices can support migration from equivalent TLC27Lx parts. The single-amplifier configuration provides one independent amplifier channel in an 8-pin SOIC package, reducing board area compared with a dual-amplifier package when only one channel is required.
Typical applications include portable sensor conditioning, low-power data acquisition, industrial monitoring, portable test equipment, and buffered sensor references. The 2.7 V minimum operating supply is suitable for low-energy designs, while the 16 V maximum recommended supply expands applicability to conventional 12 V industrial systems when component ratings, grounding, and protection are handled correctly.
When designing with the TLV27L1CD, follow the manufacturer pin-description table when assigning input, output, supply, and no-connect pins. Decoupling capacitors should be placed close to the supply pins, and the unused input should be biased so it does not float. Confirm stability, input common-mode range, output drive, and loop gain against the application before treating the device as a drop-in replacement.
This page combines the manufacturer product information, package identity, technical alternatives, parameter comparison, and practical design guidance into one engineering-focused reference for engineers evaluating the TLV27L1CD.
بدائل مباشرة لـ TLV27L1CD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع TLV27L1CD (نفس عامل الشكل والبصمة) — يختلف في Gain-Bandwidth Product, Amplifier Type, Supply Current.
TLV27L1ID
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←TLV271CD
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←TLV27L1IP
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
TLV27L1CD الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Single general-purpose operational amplifier |
| Number of Channels | 1 channel |
| Maximum Recommended Supply Voltage | 16 V |
| Minimum Operating Supply Voltage | 2.7 V |
| Gain-Bandwidth Product | 160 kHz |
| تيار التغذية | 7 μA |
| Output Swing | Rail-to-rail |
| العلبة | 8-pin SOIC |
| نوع التركيب | Surface mount |
| Shipping Format | Tube |
دليل تكوين أطراف TLV27L1CD 8-pin soic
تكوين الأطراف لـ TLV27L1CD (حزمة 8-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TLV27L1CD.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
TLV27L1CD مناسب لـ 6 التطبيقs: Portable Sensor Conditioning, Industrial Process Monitoring, Battery-Powered Data Acquisition, Portable Test and Measurement, Low-Power Control Loops, IoT and Smart Sensor Nodes.
Portable Sensor Conditioning
The TLV27L1CD fits low-power sensor interfaces because it operates from a 2.7 V supply, draws 7 μA, and provides rail-to-rail output for maximizing the available output range. Place the amplifier in a non-inverting or inverting conditioning stage around a resistive sensor network, subject to the input common-mode limits in the manufacturer datasheet. Its 160 kHz bandwidth is suitable for slow sensor signals rather than high-bandwidth sensing. Rail-to-rail output can reduce the need for additional output headroom, while low supply current helps preserve battery life. Confirm that the sensor can be biased within the amplifier's common-mode range and that the selected feedback network provides the required gain and stability.
موصى به
Industrial Process Monitoring
The TLV27L1CD is appropriate for buffering and scaling low-bandwidth process signals in 12 V industrial systems. Its 16 V maximum recommended supply supports operation from a regulated 12 V rail, while the single-channel 8-pin SOIC package keeps the footprint compact. The 160 kHz bandwidth is adequate for many temperature, pressure, and level transducer signals. A practical design places the sensor near the amplifier input to minimize noise pickup, uses stable feedback resistors, and bypasses the supply pins locally. The 7 μA operating current is valuable for distributed, low-power monitoring nodes. Before deployment, verify the industrial temperature requirement and common-mode range; the commercial TLV27L1CD suffix may require a temperature-range change.
موصى به
Battery-Powered Data Acquisition
The TLV27L1CD supports compact, battery-powered data-acquisition inputs by combining a 2.7 V minimum operating voltage with 7 μA supply current. It can amplify a conditioned transducer or bridge output when the signal bandwidth is well below the device's 160 kHz capability. The rail-to-rail output stage improves utilization of the available supply headroom, while the SOIC package is easy to assemble on both prototype and production boards. Design the input network so that the inactive or common-mode input remains within the operating limits, and place decoupling capacitors next to the supply pins. For higher-resolution acquisition, pair the amplifier with a suitable ADC while preserving the sensor's ground reference and avoiding long high-impedance traces.
موصى به
Portable Test and Measurement
The TLV27L1CD can serve as a low-power input buffer or gain stage in portable measurement equipment. Its 160 kHz bandwidth handles many slow-voltage probes and transducer outputs, while 7 μA supply current reduces the load on a battery. Rail-to-rail output is useful when the instrument operates near 3 V and needs the full available signal range. A practical implementation should use short, shielded input routing, a single solid ground reference, and local supply bypassing to reduce offset and noise pickup. The TLV27L1CD is intended for general-purpose amplification rather than premium offset or noise performance, so verify those limits against the measurement resolution. For a bench instrument requiring higher accuracy, use it as a buffer ahead of a precision converter where appropriate.
موصى به
Low-Power Control Loops
The TLV27L1CD is useful in low-power control and feedback circuits requiring modest bandwidth rather than high slew rate. It can buffer an error or feedback signal, amplify a comparator reference, or implement a simple active filter around a resistive network. The 2.7 V to 16 V supply range supports both compact battery systems and conventional industrial rails. The 160 kHz gain-bandwidth product must be compared with the closed-loop bandwidth required by the control loop, including phase margin and feedback-network impedance. Rail-to-rail output helps the amplifier drive a limited-range ADC or control input more effectively than a fixed-output amplifier. Keep the feedback loop compact and verify startup, saturation, and output-swing behavior across the complete supply range.
موصى به
IoT and Smart Sensor Nodes
The TLV27L1CD fits IoT and smart-sensor nodes that require a low-energy analog front end close to the sensing element. Its 7 μA supply current is appropriate for battery-operated nodes, while the 2.7 V minimum supply supports operation from a single low-voltage source. The rail-to-rail output can feed a controller ADC or sensor hub when the signal level is small. Place the amplifier near the sensor connection, maintain a low-impedance reference path, and avoid routing the high-impedance input through switching power-supply areas. The 160 kHz bandwidth is more than adequate for many environmental and inertial sensors but is not intended for high-frequency radio or video signals. Confirm the node's temperature range and electromagnetic environment before incorporating the device into a deployed product.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ TLV27L1CD — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | TLV27L1ID | TLV271CD | TLV27L1IP |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Amplifier Channels | 1 channel | 1 channel | 1 channel | 1 channel |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
أبرز الفروقات
- Lower operating current than a typical general-purpose rail-to-rail amplifier (مقابلTLV271CD)
- Defined 160 kHz bandwidth for low-frequency signal conditioning (مقابلTLV27L1ID)
- Single-channel operation reduces board area for one-channel designs (مقابلTLV271CD)
ملاحظات التصميم
Place the input, output, and supply connections so the TLV27L1CD has a short, low-inductance path to the signal source. Put the supply bypass capacitor immediately beside the positive and ground pins, and connect the capacitor ground directly to the package ground pin. For high-impedance sensors, minimize input-trace length and keep the routes away from switching nodes to reduce injected noise and unintended capacitive feedback.
Do not allow either amplifier input to float. Tie the unused input to a defined bias point within its common-mode operating region, preferably close to the grounded or mid-supply reference used by the active channel. Verify output swing, input common-mode range, and stability for the actual feedback network. Rail-to-rail output does not imply that the input accepts every voltage between the supply rails.
The 160 kHz gain-bandwidth product is appropriate for low-bandwidth sensor and control signals, not high-speed video or RF waveforms. Check the required closed-loop gain against the frequency-response and phase-margin curves in the manufacturer datasheet. Use low-value, low-noise feedback resistors where practical, while ensuring that capacitance at the input and output nodes remains controlled.
Design the supply path for the specified 2.7 V to 16 V operating range and keep transient voltages within the manufacturer's absolute-maximum limits. A 12 V industrial source may require filtering or protection even though 12 V is below the 16 V recommended maximum. Confirm common-mode and output-swing behavior at the lowest operating supply because headroom changes as the supply falls.
معلومات الامتثال
No exact-orderable-part regulatory declarations were established for TLV27L1CD. The device is a general-purpose commercial operational amplifier and is not identified as an AEC-Q100 automotive-qualified ordering code.