TS922AID - Dual Rail-to-Rail Op Amp | STMicroelectronics
MPN: TS922AID ✓ نشطTS922AID نظرة عامة
An operational amplifier is an analog signal-conditioning IC that amplifies the difference between two input voltages. A dual amplifier contains two independent amplifiers in one package, while a rail-to-rail input and output stage allows operation close to both supply-voltage limits. The TS922AID therefore occupies the amplifier, analog IC, and semiconductor hierarchy while serving precision audio, buffer, and low-load drive applications.
The principal features include rail-to-rail input and output capability, 80 mA output current, 9 nV/√Hz input noise, 0.005% distortion, a 4 MHz gain-bandwidth product, and a 1 V/µs slew rate. These characteristics combine low-noise signal handling with enough output drive to operate 32 low-impedance loads according to the manufacturer description.
The TS922AID uses a BiCMOS process that combines bipolar input circuitry with CMOS output stages. Its high output current is the principal architectural distinction from many general-purpose dual amplifiers, especially when the output must remain low-impedance while operating near the supply rails. The 3 V and 5 V optimization also makes it appropriate for compact, low-voltage analog systems.
Typical uses include audio preamplifier stages, active filters, sensor-conditioning circuits, low-impedance buffer applications, and portable test or measurement equipment. The dual configuration allows two related signal paths to be implemented in one package, reducing board area and simplifying dual-rail analog front ends.
For stable operation, follow the manufacturer datasheet for supply-decoupling close to the power pins and for output-load limits. Input and output common-mode ranges, input bias current, offset voltage, and exact operating-temperature limits should be checked against the specific operating point before production release.
This page organizes the manufacturer specifications, sourcing information, application guidance, and verified drop-in options for engineers evaluating the TS922AID. It also distinguishes confirmed pin-compatible choices from family members that differ in grade, package, or packaging and therefore require separate engineering review.
بدائل مباشرة لـ TS922AID — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع TS922AID (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type.
TS922ID
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←TS922AID الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Amplifiers | 2 circuits |
| Process Technology | BiCMOS |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Optimized Supply Voltage | 3 V and 5 V |
| Maximum Supply Voltage | 12 V |
| Output Current | 80 mA |
| Low-Impedance Load Drive | 32 loads |
| Input Noise | 9 nV/√Hz |
| Distortion | 0.005% |
| Gain-Bandwidth Product | 4 MHz |
| Slew Rate | 1 V/µs |
| العلبة | 8-pin SOIC |
| نوع التركيب | Surface mount |
دليل تكوين أطراف TS922AID 8-pin soic
تكوين الأطراف لـ TS922AID (حزمة 8-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TS922AID.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
TS922AID مناسب لـ 6 التطبيقs: Audio Preamplifier, Low-Impedance Buffer, Active Audio Filter, Portable Sensor Conditioning, Industrial Interface Signal Path, Test and Measurement Front End.
Audio Preamplifier
The TS922AID fits low-noise audio preamplifier stages because its 9 nV/√Hz input noise and 0.005% distortion support accurate signal amplification without adding substantial harmonic content. The 80 mA output current provides more drive than a typical general-purpose dual op amp when the next stage presents a moderately low impedance. Operate it from 3 V or 5 V for the conditions emphasized by STMicroelectronics, and verify output swing, stability, and load compatibility in the manufacturer datasheet.
موصى به
Low-Impedance Buffer
The TS922AID is well suited to buffering sensor or logic signals into loads that could otherwise disturb source impedance. Its 80 mA output-current capability and 1 V/µs slew rate allow the output to recover quickly from capacitive loading while retaining a 4 MHz gain-bandwidth product. This makes the dual amplifier useful for two buffered channels in compact 3 V or 5 V systems. Check the maximum capacitive load and output-current limits before finalizing the PCB and load network.
موصى به
Active Audio Filter
The dual TS922AID can implement two active-filter channels for audio crossover, equalization, or noise-shaping functions. Its 0.005% distortion supports low-error signal processing, while rail-to-rail input and output operation improves signal range in compact 3 V and 5 V designs. The 4 MHz gain-bandwidth product provides bandwidth for moderate-frequency filter sections, and the two channels reduce component count when identical transfer functions are required. Confirm loop-gain stability and component tolerances against the target response.
موصى به
Portable Sensor Conditioning
The TS922AID can condition low-level sensor outputs in portable equipment when low noise and load drive matter more than minimum power consumption. Its 9 nV/√Hz noise reduces input-referred disturbance in a sensitive analog path, and the dual format supports two related measurements. The manufacturer describes the device for 3 V and 5 V optimization, making it appropriate for compact battery-powered instruments, although the final system must remain within the complete operating-voltage and temperature limits.
موصى به
Industrial Interface Signal Path
The TS922AID can serve as the analog signal path in industrial interface equipment that requires stronger output drive than a conventional precision op amp provides. Rail-to-rail operation helps preserve usable swing near 3 V or 5 V supply limits, and the 80 mA output current can simplify driving subsequent stages or isolation-related circuitry. The 8-pin SOIC package supports conventional surface-mount assembly. Validate noise, offset, common-mode range, and temperature performance for the actual industrial environment.
موصى به
Test and Measurement Front End
The TS922AID is applicable to compact test and measurement front ends where a low-noise amplifier must drive an ADC, comparator, or attenuator network. Its 9 nV/√Hz noise, 0.005% distortion, and 1 V/µs slew rate support accurate handling of small-amplitude signals, while 80 mA output current reduces sensitivity to downstream loading. The dual arrangement can accelerate two-channel instrumentation. Use careful grounding and decoupling, and verify that the selected gain and capacitive-load conditions remain stable.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ TS922AID — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | TS922ID |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | SOIC-8 | SOIC-8 |
| Amplifier Configuration | Dual | Dual |
أبرز الفروقات
- Exceptionally strong output drive for a general-purpose dual op amp (مقابلTS922ID)
- Low-noise operation supports sensitive analog signal paths (مقابلTS922ID)
- Dual rail-to-rail architecture in a compact standard SOIC package (مقابلTS922ID)
ملاحظات التصميم
Place the supply-decoupling capacitors directly beside the TS922AID power pins, with the ground-return path kept short and independent of high-current output returns. Because the device is a dual amplifier in an 8-pin SOIC, route the two channels to minimize coupling between inputs and outputs. Use a solid ground plane and place input resistors and feedback components close to the relevant amplifier pins to reduce parasitic feedback and sensitivity to board contamination.
Do not assume that rail-to-rail input and output behavior guarantees usable swing at every load. Check the manufacturer output-swing and output-current curves against the selected 3 V or 5 V supply, load resistance, and output waveform. Likewise, account for the input common-mode range when signals approach either supply rail. The 80 mA output-current capability is a maximum capability, not a continuous operating point that should be used without thermal and load analysis.
For audio, sensing, or precision filtering, terminate unused amplifier inputs in a manner consistent with the selected noise-gain configuration and avoid leaving an unused channel floating. Keep high-impedance input traces short and away from the outputs, which can develop large voltage swings at high slew rate. Evaluate the completed circuit for oscillation with realistic source capacitance, load capacitance, PCB parasitics, and external probe loading before production.
Although the TS922AID is a low-voltage analog amplifier, its 80 mA output-current capability can produce meaningful dissipation when driving a load with a substantial voltage difference. Estimated: power dissipation equals output voltage multiplied by output current; at 5 V and 20 mA, the output-stage dissipation is 0.1 W before considering internal losses. Confirm the 8-pin SOIC thermal behavior and ambient-temperature limits in the manufacturer documentation.
معلومات الامتثال
Compliance attributes are not stated in the product information and must be confirmed from the manufacturer product page, material declarations, or current quality documentation before procurement.