W78E052B40FL - 40MHz 8KB Flash 8051 MCU | Nuvoton
MPN: W78E052B40FL ✓ نشطW78E052B40FL نظرة عامة
An 8051-compatible microcontroller integrates a CPU core, program memory, data memory, I/O ports, and embedded control peripherals on one semiconductor device. The W78E052B40FL provides 8 KB organized as 8K x 8 for firmware storage and 256 x 8 bits of RAM for working variables. Its 36 available I/O lines provide connections for digital control signals, while its 40 MHz operating speed supports control tasks that require more computational throughput than a low-speed general-purpose 8-bit platform.
The most important device characteristics are its 8-bit processor architecture, 40 MHz maximum speed, 8 KB Flash memory, 256 x 8-bit RAM, 36 I/O pins, and internal oscillator. Flash program memory allows firmware to be stored in a nonvolatile semiconductor memory structure. The integrated oscillator eliminates the need for an external clock source when the device's internal timing system is suitable for the design. The 44-BQFP package also provides a defined surface-mount land pattern for PCB assembly.
The W78E052B40FL is suited to compact embedded controllers that need deterministic digital I/O, modest firmware capacity, and 8051-compatible software support. Potential system roles include industrial machine controls, appliance controllers, digital sensor aggregators, simple power-conversion supervisory circuits, stepper or motor-control front ends, and compact human-machine-interface controllers. Final peripheral selection and application suitability should be confirmed against the complete manufacturer datasheet and device pin description.
Designers should treat the 36 I/O pins as the principal external interface and verify every port's alternate function before assigning a signal. Decoupling, oscillator startup, programming mode, reset behavior, and unused-pin treatment should follow the manufacturer's reference circuit and layout guidance. The device's limited 8 KB program-memory capacity makes code-size budgeting especially important for communications, logging, and feature-rich control firmware.
This page consolidates the verified device identity, operating characteristics, package information, sourcing context, drop-in replacement assessment, and practical selection guidance. It also highlights where firmware, pin-level, and peripheral details must be checked in the manufacturer documentation before a new PCB or embedded product is released.
بدائل مباشرة لـ W78E052B40FL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع W78E052B40FL (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.
W78E052C40FL
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←W78E052B40FL الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit 8051-compatible flash microcontroller |
| Manufacturer | Nuvoton Technology Corporation |
| Maximum Operating Speed | 40 MHz |
| Core Processor | 8051 |
| Core Width | 8 bit |
| Program Memory Size | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| RAM Size | 256 x 8 bit |
| Number of I/O Pins | 36 |
| العلبة | 44-BQFP |
| نوع التركيب | Surface mount |
| Oscillator | Internal oscillator |
دليل تكوين أطراف W78E052B40FL 44-bqfp
تكوين الأطراف لـ W78E052B40FL (حزمة 44-bqfp). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ W78E052B40FL.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
W78E052B40FL مناسب لـ 6 التطبيقs: Industrial Digital Control, Appliance and Equipment Controller, Digital Sensor Aggregator, Power-Supply Supervisory Controller, Small Motor and Stepper Control Front End, Compact Human-Machine Interface.
Industrial Digital Control
The W78E052B40FL fits compact industrial control modules that combine an 8-bit control task with multiple discrete input and output signals. Its 36 I/O lines provide a substantial external interface for limit switches, relay-control outputs, status indicators, and digital sensor inputs, while the 40 MHz operating speed supports responsive sequential control logic. The 8 KB Flash memory provides nonvolatile firmware storage for fixed control routines, state machines, diagnostics, and parameter handling. For an industrial design, verify the operating-temperature range, supply limits, and any required qualification in the manufacturer documentation. The relatively compact 8 KB code budget also makes disciplined modular coding important when diagnostics or communication functions expand.
Appliance and Equipment Controller
The W78E052B40FL is appropriate for appliance and equipment controllers where a dedicated microcontroller must coordinate buttons, indicators, sensors, actuators, and a small control display. Its 8051-compatible 8-bit core supports straightforward firmware organization, while 36 I/O lines reduce the need for external digital expansion. The 8 KB Flash memory can retain the main operating state machine and fixed lookup or calibration logic, and 256 x 8 bits of RAM provides working space for variables and temporary processing. Before finalizing the controller, check whether the required display, communication, and actuator interfaces exceed the device's confirmed peripheral set and pin assignments.
Digital Sensor Aggregator
W78E052B40FL can serve as the central controller in a digital sensor aggregation system where multiple switches, encoders, discrete sensors, and output signals must be sampled and coordinated. Its 36 I/O lines are useful for parallel digital inputs and outputs, and the 40 MHz clock provides useful throughput for protocol handling, filtering, debouncing, and system-state management. Flash memory supports nonvolatile firmware, while the 256 x 8-bit RAM is suitable for lightweight buffering. Engineers should confirm the exact port multiplexing and available timers or serial functions in the manufacturer pin table. They should also budget code space carefully if diagnostic logging or a large communications stack is planned.
Power-Supply Supervisory Controller
The W78E052B40FL can be evaluated for supervisory functions in compact power systems where the controller monitors discrete power-state signals, controls enable sequencing, records fault conditions, and drives status outputs. The 36 digital I/O pins offer ample connections for discrete supervisory tasks, and the 40 MHz 8051 core can execute finite-state logic and timing functions. Its 8 KB Flash memory is useful for storing a fixed sequence and fault table, while the RAM can hold current state variables. This application still requires careful review of input thresholds, output drive capability, reset behavior, isolation requirements, and protection architecture because those electrical details are not established by the basic device listings.
Small Motor and Stepper Control Front End
The W78E052B40FL is suitable for a compact stepper or small-motor sequencing controller when the system uses discrete command and limit signals and performs relatively simple motion-state management. Its 36 I/O lines can accommodate phase-control commands, home and limit inputs, and status outputs, while the 40 MHz speed supports timing loops and sequential phase updates. The 8051-compatible architecture also supports established embedded toolchains and familiar control-code patterns. A production design must confirm whether the device includes the required timers, pulse-width outputs, and interrupt resources, and it must verify current ratings, protection networks, and thermal conditions of the external driver stage.
Compact Human-Machine Interface
W78E052B40FL can support a compact human-machine interface built around switches, LEDs, a small display, and a limited set of menu controls. The 36 I/O lines can distribute input and output functions across the interface, while the 40 MHz 8-bit processor is suitable for event handling, debouncing, display updates, and simple menu navigation. Its 8 KB Flash capacity favors a focused interface with limited graphics, while 256 x 8 bits of RAM constrains temporary display buffers and event histories. Before choosing it, compare the required display interface, memory demand, refresh rate, and standby behavior with the confirmed peripheral and electrical specifications in the manufacturer datasheet.
بيانات مرجعية هندسية لـ W78E052B40FL — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | W78E052C40FL |
|---|---|---|
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Package | 44-BQFP | 44-QFP |
| Core Processor | 8051 | 8051 |
| Core Width | 8 bit | 8 bit |
| Program Memory Size | 8 KB (8K x 8) | 8 KB |
| Program Memory Type | Flash | Flash |
أبرز الفروقات
- Directly identified 40 MHz W78 8051 configuration (مقابلW78E052C40FL)
- Exact program-memory organization is documented (مقابلW78E052C40FL)
- Complete core and I/O identity is established for the target (مقابلW78E052C40FL)
ملاحظات التصميم
Treat the 44-BQFP land pattern and the 36 I/O pins as a constrained routing resource. Assign pins only after reviewing the manufacturer's pin-description table, because port signals may have alternate functions and programming or reset requirements. Place required decoupling capacitors close to their associated supply pins, preserve the package's thermal and copper requirements, and avoid long traces between external clock or sensitive timing circuits and the controller.
The principal design constraint is the 8 KB Flash program-memory limit. Build a linker-level code-size budget early, reserve space for startup code and interrupts, and avoid adding large runtime libraries after the board layout is frozen. The 256 x 8-bit RAM is also modest, so prefer bounded buffers and static allocation over recursive or dynamically fragmented memory patterns.
Confirm the exact VCC operating range, absolute maximum ratings, input thresholds, output-drive limits, and power-consumption figures from the manufacturer documentation before defining the supply rail and external interface. The internal oscillator should also be checked for required accuracy and startup behavior. Do not design a 3.3 V or 5 V interface solely from general family expectations without verifying the exact W78E052B40FL electrical characteristics.
For externally controlled signals, verify whether the pins are 5 V tolerant and whether pull-up or pull-down resistors are required for stable logic levels. Keep switching outputs and potentially noisy signals separated from sensitive digital inputs where the board area allows. Review clock, reset, and programming interfaces for debounce or contention risks during startup and production programming.
معلومات الامتثال
The verified catalog results do not state compliance declarations for the exact MPN. Obtain the current manufacturer declaration of compliance for procurement approval.