XC7K160T-L2FBG676I - 162,240-LC Kintex-7 FPGA | AMD
MPN: XC7K160T-L2FBG676I ✓ نشطXC7K160T-L2FBG676I نظرة عامة
A Kintex-7 FPGA belongs to the Xilinx 7 Series FPGA family, which combines FPGA logic with configurable digital signal processing, programmable I/O, embedded memory, high-speed transceivers, and dedicated clocking resources. This device is designed for systems requiring substantial parallel processing and flexible hardware architecture, allowing functions such as protocol handling, data acquisition, signal processing, packet switching, and interface bridging to be implemented in programmable logic rather than fixed-function silicon.
The XC7K160T-L2FBG676I provides 162,240 logic cells organized into 12,675 CLBs, together with 11,700 Kb of block RAM. Its 400 user I/O support communication with external converters, memories, transceivers, and digital peripherals. The FBG676 package uses a 676-ball grid array with a 1.00 mm terminal pitch, supporting high-density routing in a 27 mm × 27 mm body. The industrial temperature suffix I identifies the appropriate temperature grade for industrial operating conditions.
The L2 grade is differentiated from the ordinary -2 grade by its lower-power characterization. According to AMD's Kintex-7 family documentation, -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than -2 devices. This makes the L2 option relevant to power-conscious industrial, communications, instrumentation, and embedded-processing systems where thermal design, battery capacity, or system cooling constrains FPGA power consumption.
Typical applications include industrial data acquisition, test and measurement, telecommunications line cards, networking equipment, embedded vision, control systems, and high-throughput digital signal processing. The large logic and memory resources allow parallel channels, wide data paths, and buffering to be consolidated in one programmable device. The 400 I/O also make the device practical for systems combining multiple external interfaces with substantial on-chip processing.
PCB design should follow the AMD package pinout, power-decoupling, configuration, clocking, and thermal guidance. Because a 676-ball BGA is difficult to inspect and rework, adequate solder-mask and paste-defined land patterns, X-ray inspection, and assembly-process control are important. Power, ground, configuration pins, and high-speed I/O must be assigned with the device's published package and schematic guidance before layout is released.
This page organizes the device's architecture, package constraints, application guidance, drop-in alternatives, and design considerations into an engineering-focused reference. It also highlights the distinction between the low-power L2 grade and standard -2 or -1 Kintex-7 options, helping designers evaluate speed-grade, power, and production-sourcing trade-offs before committing a PCB or system architecture.
بدائل مباشرة لـ XC7K160T-L2FBG676I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC7K160T-L2FBG676I (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Speed Grade, Block RAM, Process Technology.
XC7K160T-1FBG676I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K160T-3FBG676E
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K160T-2FBG676C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K160T-1FBG676C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K160T-L2FBG676I الحدود القصوى والخصائص الكهربائية
| Device Type | Kintex-7 Field Programmable Gate Array |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| Block RAM | 11,700 Kb |
| Total RAM Bits | 11,980,800 bits |
| User I/O | 400 I/O |
| Speed Grade | L2 |
| Temperature Grade | Industrial |
| العلبة | FBG676, 676-ball BGA |
| Package Type | 676-BBGA, FCBGA |
| Package Body Size | 27 mm × 27 mm |
| Terminal Pitch | 1.00 mm |
| نوع التركيب | Surface Mount |
| Core Supply Voltage | 1 V nominal |
| Core Supply Voltage Range | 0.97 V to 1.03 V |
| Programmable Logic | FPGA |
دليل تكوين أطراف XC7K160T-L2FBG676I 27 mm × 27 mm
تكوين الأطراف لـ XC7K160T-L2FBG676I (حزمة 27 mm × 27 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC7K160T-L2FBG676I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC7K160T-L2FBG676I مناسب لـ 6 التطبيقs: Industrial Data Acquisition, Telecommunications Line Cards, Test and Measurement, Embedded Vision Processing, High-Speed Signal Processing, Programmable Control Systems.
Industrial Data Acquisition
The XC7K160T-L2FBG676I fits industrial data-acquisition systems that must combine many simultaneous channels with substantial digital processing. Its 162,240 logic cells and 12,675 CLBs provide parallel logic for channel multiplexing, filtering, triggering, and data packing, while 11,700 Kb of block RAM supports buffering between acquisition and processing stages. The 400 I/O give the design enough external connections for converters, clocks, sensors, and control signals. The L2 grade is especially relevant when reduced static and dynamic power helps limit thermal rise in a sealed or fan-constrained enclosure. Power estimates and timing must be verified against the selected design implementation.
موصى به
Telecommunications Line Cards
The XC7K160T-L2FBG676I is suitable for telecommunications line-card logic where multiple channels, packet processing, and control functions must coexist in one programmable device. The 162,240 logic cells support parallel datapaths and protocol engines, while 11,700 Kb of block RAM provides local packet buffering and timing. Its 400 I/O allow connection to network transceivers, backplane interfaces, status signals, and configuration circuitry without relying on fixed-function logic. The L2 power profile can benefit space-constrained line-card designs, although clocking, SerDes usage, power integrity, and thermal performance depend on the complete design and must be validated with AMD timing and power tools.
موصى به
Test and Measurement
The XC7K160T-L2FBG676I can implement concurrent test, measurement, and pattern-generation logic because its 12,675 CLBs and 11,700 Kb of block RAM support parallel datapaths and deep sample storage. The 400 I/O provide connections to instrumentation, programmable sources, capture devices, trigger logic, and communication controllers. A single FPGA can consolidate timing-sensitive acquisition, digital signal transformation, and result formatting while leaving reusable programmable logic for multiple instrument modes. The L2 grade is useful when instrument power and thermal limits are restrictive, but designers must analyze worst-case utilization, clock uncertainty, I/O standards, and power behavior for each supported operating mode.
موصى به
Embedded Vision Processing
The XC7K160T-L2FBG676I supports embedded vision systems that require parallel pixel processing, frame buffering, and multi-format interface handling. Its 162,240 logic cells can implement row and column pipelines, color conversion, thresholding, feature extraction, or control processors, while the 11,700 Kb of block RAM can hold line buffers and multi-frame data. The 400 I/O are useful for connecting image sensors, display or capture devices, and external memory. The lower-power L2 characterization can help systems with limited cooling, but image throughput and video timing must be verified using actual pixel rates, memory bandwidth, clocking, and selected I/O standards.
موصى به
High-Speed Signal Processing
The XC7K160T-L2FBG676I is well suited to fixed- or floating-point signal-processing systems requiring wide parallel arithmetic and configurable datapaths. The 12,675 CLBs can support filters, transforms, correlation, demodulation, and control logic, while 11,700 Kb of block RAM provides predictable on-chip data storage and line buffering. With 400 I/O, the FPGA can accept multiple converter channels and coordinate clocks, triggers, and external accelerators. The L2 grade can reduce system power when the design is thermally constrained, although DSP inference results, timing margin, memory throughput, and numerical accuracy must be confirmed for the selected algorithm and target clock frequency.
موصى به
Programmable Control Systems
The XC7K160T-L2FBG676I can serve as the central programmable controller in complex industrial or transportation systems because it combines extensive logic, embedded RAM, and 400 I/O in one device. Control sequences can run concurrently with communication protocols, diagnostics, motion-related logic, and safety monitoring, while the block RAM supports message queues, history buffers, and lookup structures. The L2 grade helps reduce static and dynamic power in continuously operating equipment. Designers should partition real-time tasks carefully, verify clock-domain crossings, and use the manufacturer timing and power reports to confirm that the selected I/O and clock architecture meet the system's response requirements.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC7K160T-L2FBG676I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC7K160T-2FBG676I | XC7K160T-1FBG676I | XC7K160T-3FBG676E | XC7K160T-2FBG676C | XC7K160T-1FBG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBG676, 676-ball BGA | FBG676, 676-ball BGA - same | FBG676, 676-ball BGA - same | FBG676, 676-ball BGA - same | FBG676, 676-ball BGA - same | FBG676, 676-ball BGA - same |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs | 12,675 CLBs | 12,675 CLBs | 12,675 CLBs | 12,675 CLBs | 12,675 CLBs |
| Block RAM | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Speed Grade | L2 | -2 | -1 | -3 | -2 | -1 |
| Temperature Grade | Industrial | Industrial | Industrial | Extended | Commercial | Commercial |
| Package Body Size | 27 mm × 27 mm | 27 mm × 27 mm | 27 mm × 27 mm | 27 mm × 27 mm | 27 mm × 27 mm | 27 mm × 27 mm |
| Terminal Pitch | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm |
أبرز الفروقات
- Lower-power L2 speed grade within the Kintex-7 family (مقابلXC7K160T-2FBG676I)
- Industrial-grade L2 option for continuously operating equipment (مقابلXC7K160T-2FBG676C)
- Lower-power characterization without moving to the -1 speed grade (مقابلXC7K160T-1FBG676I)
ملاحظات التصميم
The L2 grade is intended to reduce static and dynamic power relative to the standard -2 grade, but the complete rail budget still depends on configuration, utilization, clocking, I/O activity, and ambient temperature. Separate core, auxiliary, and I/O supplies as directed by the manufacturer, place decoupling capacitors at the specified package pins, and use AMD's power-estimation and thermal reports for the final design. Do not substitute rail values solely from a family-level summary.
A 676-ball BGA concentrates heat beneath the device, making board copper, vias, and enclosure airflow important. Route power and ground planes to provide low-impedance vertical connections, avoid thermal voids beneath the central device region, and calculate junction temperature from actual dissipation and the package-specific thermal model. The L2 grade can reduce the thermal burden, but the implemented logic and I/O toggle rates determine the final power and temperature rise.
The FBG676 footprint uses a 1.00 mm ball pitch on a 27 mm × 27 mm body and requires assembly controls appropriate for fine-pitch BGA. Match the manufacturer land pattern, solder mask, paste stencil, and assembly profile exactly. Because hidden solder joints cannot be inspected optically, plan X-ray inspection, maintain placement accuracy, and use a controlled rework process if field service is expected.
Do not treat a same-package speed-grade variant as automatically interchangeable. Although the listed alternatives retain the 676-ball FBG footprint, L2, -1, -2, -3, commercial, industrial, and extended-temperature options differ in timing, power, and environmental limits. After substitution, rerun synthesis or bitstream generation, static timing analysis, power analysis, and board-level validation. Verify that the replacement part's configuration, security, and temperature requirements match the system.
معلومات الامتثال
Compliance status was not established by the cited device pages. The I suffix identifies the industrial temperature grade, but it does not by itself establish AEC-Q100 qualification.