XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD
MPN: XCKU040-1FBVA676C ✓ نشطXCKU040-1FBVA676C نظرة عامة
A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial transceivers. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and general-purpose processors because its parallel architecture can accelerate bitstream-defined data paths. The Kintex UltraScale family occupies the performance and resource range between smaller UltraScale devices and larger UltraScale+ devices.
The XCKU040 resource totals include approximately 242,400 logic blocks or CLBs, 530,250 logic elements or cells, and 21,606,000 RAM bits. Its 312 user I/O support digital connectivity on the board, while the -1 speed grade identifies its timing and power class. These resources make the device suitable for parallel processing, protocol handling, image processing, data acquisition, and embedded control systems requiring deterministic hardware execution.
The FCBGA package integrates 676 package connections and supports dense board-level routing needed for high-speed interfaces and programmable logic. Its 27 x 27 mm form factor is confirmed for the XCKU040-1FBVA676C. Because this is a high-pin-count BGA device, exact power delivery, escape routing, and differential-pair layout must follow the AMD package pinout files and the applicable device guidance rather than general BGA assumptions.
Typical deployments include industrial vision, test and measurement, communications infrastructure, scientific instrumentation, and embedded signal-processing systems. In these applications, the FPGA can execute multiple parallel data paths in parallel, reduce external processor loading, and provide deterministic latency through fixed hardware pipelines. The 312 user I/O also permit direct interfacing with sensors, converters, memory, and network transceivers.
Designers should verify power sequencing, decoupling, thermal performance, and high-speed signal integrity against the AMD documentation for the exact package and speed grade. A 676-pin FCBGA also requires careful PCB stack-up, via-in-pad or microvia strategy, and assembly process control. Confirm the pinout by device rather than inferring it from another XCKU040 package option.
This page consolidates the verified resource totals, package characteristics, speed-grade designation, and practical design considerations for the XCKU040-1FBVA676C. It also distinguishes same-footprint alternatives by speed and temperature grade so engineers can identify a suitable replacement without overlooking device qualification requirements.
بدائل مباشرة لـ XCKU040-1FBVA676C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
XCKU040-1FBVA676I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XCKU040-2FBVA676C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XCKU040-3FBVA676C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XCKU040-1LFBVA676C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XCKU040-2LFBVA676C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XCKU040-1FBVA676C الحدود القصوى والخصائص الكهربائية
| Device Type | Kintex UltraScale FPGA |
| Logic Elements | 530,250 cells |
| Logic Blocks | 242,400 CLBs |
| Block RAM | 21,606,000 bits |
| User I/O | 312 I/O |
| Package Pins | 676 pins |
| العلبة | 676-FCBGA, 27 x 27 mm |
| نوع التركيب | Surface mount |
| Core Supply Voltage | 0.95 V |
| Process Technology | 20 nm |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| Programming | FPGA configuration bitstream |
| Transceiver Resources | GTH transceivers |
دليل تكوين أطراف XCKU040-1FBVA676C 676-fcbga, 27 x 27 mm
تكوين الأطراف لـ XCKU040-1FBVA676C (حزمة 676-fcbga, 27 x 27 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XCKU040-1FBVA676C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XCKU040-1FBVA676C مناسب لـ 6 التطبيقs: Industrial Machine Vision, Communications Infrastructure, Test and Measurement, Scientific Data Acquisition, High-Performance Embedded Control, Aerospace Ground Processing.
Industrial Machine Vision
The AMD XCKU040-1FBVA676C fits industrial vision systems requiring parallel image-processing pipelines, local buffering, and extensive sensor connectivity. Its 530,250 logic cells and 242,400 CLBs can implement acquisition, filtering, thresholding, and feature-processing stages concurrently, while 21,606,000 RAM bits provide on-chip line and frame buffers. The 312 user I/O simplify direct connections to image sensors, serializers, memory, and digital control components. Compared with a general-purpose processor, fixed FPGA pipelines can deliver deterministic frame timing and reduce host-processing load. The commercial-grade part is appropriate when enclosure temperature remains within its qualification limits; use the -1I option when industrial-temperature operation is required.
موصى به
Communications Infrastructure
The XCKU040-1FBVA676C is suitable for communications infrastructure requiring parallel packet handling, high-speed serial interfaces, and deterministic data movement. Its Kintex UltraScale implementation provides 530,250 logic cells, 21,606,000 RAM bits, and GTH transceiver resources for protocol termination, framing, filtering, and traffic management. The 312 user I/O allow configuration, monitoring, clocking, and external network interfaces to be integrated without relying entirely on a separate processor. A -1 speed-grade FPGA provides a distinct performance class within the same XCKU040 family. Exact line-rate support, reference-clock requirements, transceiver configuration, and thermal performance must be checked against the device documentation before the circuit is released.
موصى به
Test and Measurement
The AMD XCKU040-1FBVA676C can implement multi-channel acquisition, pattern generation, digital signal processing, and real-time analysis in a compact instrument. Its 530,250 logic cells support parallel test channels, while 21,606,000 RAM bits accommodate acquisition buffers and intermediate results. With 312 user I/O, the device can connect directly to ADC and DAC front ends, trigger circuits, counters, memory, and host interfaces. FPGA-based timing is valuable where repeatable latency and deterministic control are more important than flexibility. The 676-FCBGA package also supports the pin density needed by multi-channel architectures, although careful budgeting is essential for power delivery, signal integrity, thermal rise, and BGA assembly yield.
موصى به
Scientific Data Acquisition
The XCKU040-1FBVA676C suits scientific instruments that convert high-rate sensor data into real-time filtered or analyzed results. The 20 nm Kintex UltraScale device combines 530,250 logic cells, 21,606,000 RAM bits, and 312 user I/O, enabling parallel ADC capture, digital correction, windowing, correlation, and data reduction in one device. A hardware pipeline can maintain consistent sampling intervals and avoid transferring every raw sample to an external host. The -1 speed grade provides a defined timing class for system-level closure. Designers should confirm converter interface timing, acquisition latency, clock-jitter tolerance, power integrity, and enclosure thermal conditions for each measurement channel.
موصى به
High-Performance Embedded Control
The XCKU040-1FBVA676C can serve as a deterministic embedded control processor for equipment requiring parallel automation, custom protocol handling, and low-latency responses. Its 530,250 logic cells allow multiple control tasks and state machines to operate concurrently, while 21,606,000 RAM bits support local queues, trace data, and protocol buffers. The 312 user I/O provide direct control of motors, actuators, sensors, memory, and safety-related monitoring circuits. Unlike a software processor, the FPGA executes fixed hardware logic with predictable timing, which can simplify hard real-time partitioning. The -1 commercial-grade component should be selected only after checking the system's worst-case ambient temperature and startup, power-sequencing, and watchdog behavior.
موصى به
Aerospace Ground Processing
The XCKU040-1FBVA676C is appropriate for laboratory, test, and ground-processing equipment around aerospace systems, where parallel computation and deterministic interfaces are useful. The device can execute telemetry decoding, signal conditioning, navigation-data processing, and acquisition control using 530,250 logic cells and 21,606,000 RAM bits. Its 312 user I/O enables connection to sensor conditioning, clocks, recorders, and communications equipment. Because the XCKU040-1FBVA676C is the commercial-temperature ordering option, it should not be assumed suitable for airborne temperature or qualification requirements without separate program approval. Select a properly qualified device and validate radiation, vibration, temperature, and reliability requirements at the system level.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XCKU040-1FBVA676C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XCKU040-1FBVA676I | XCKU040-2FBVA676C | XCKU040-3FBVA676C | XCKU040-1LFBVA676C | XCKU040-2LFBVA676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) |
| Speed Grade | -1 | -1 | -2 | -3 | -1L | -2L |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial | Commercial | Commercial |
أبرز الفروقات
- Same-package industrial-temperature option (مقابلXCKU040-1FBVA676I)
- Higher timing class without changing the device footprint (مقابلXCKU040-2FBVA676C)
- Low-power option for the same 676-FCBGA platform (مقابلXCKU040-1LFBVA676C)
ملاحظات التصميم
Use the device-specific AMD power guidance to define the 0.95 V core and auxiliary power rails, sequencing, and decoupling. Place the smallest decoupling capacitors at the nearest package balls and provide a low-impedance distribution network across the 676-FCBGA footprint. Do not reuse the power design from another package option because the FBVA676 and FFVA1156 devices have different ball maps and escape requirements.
Plan the PCB stack-up, via-in-pad or microvia strategy, and BGA assembly process around the 676-FCBGA package. Use the AMD package pinout files and the selected device's escape-routing guidance to assign every ball. Validate that differential pairs and clock routes can escape without excessive stubs, and confirm the board fabricator can support the selected ball pitch, solder-mask definition, and X-ray inspection requirements.
Evaluate junction temperature using the power data and thermal model for the exact speed grade, utilization, and ambient environment. The -1, -2, -3, -1L, and -2L alternatives may produce different dynamic power even when their logic-cell totals are unchanged. Provide copper spreading and airflow appropriate to the board enclosure, and verify that peak configuration and I/O activity do not exceed the device's thermal limits.
Review every external interface against the -1 speed-grade timing constraints and the pinout of the 676-FCBGA device. Keep high-speed transceiver and memory routing away from noisy power-regulator switching nodes, maintain continuous reference planes, and follow the prescribed length and via rules. Re-run signal-integrity and power-integrity simulations after any stack-up, via, or component-placement change.
معلومات الامتثال
Compliance status was not established by the cited product and distributor information. Confirm lead-free, RoHS, REACH, conflict-minerals, and automotive qualification requirements with AMD using the exact ordering code.