Zilog

Z86C9320PSG - 8-Bit 20MHz ROMless MCU | Zilog

MPN: Z86C9320PSG ✓ نشط
4.5 V to 5.5 V Vdss 40-pin PDIP Package 20 MHz Speed External memory required Memory
الحد الأدنى للطلب: 1 |

Z86C9320PSG نظرة عامة

Zilog Z86C9320PSG is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz, with a 4.5 V to 5.5 V supply range, 24 I/O ports, an 8-bit data bus, and a 40-pin PDIP package. It belongs to the Zilog Z8 family of CISC-based embedded microcontrollers and is intended for applications requiring external program memory and a broad mix of digital I/O.

A ROMless microcontroller is a semiconductor that contains a processor core and peripherals but requires an external memory device for program storage. The Z86C9320PSG therefore supports designs in which firmware size, memory organization, or update strategy is better handled by external ROM. Within the product hierarchy, it is an 8-bit microcontroller, an embedded controller, an integrated circuit, and a programmable semiconductor.

The Z86C9320PSG combines a maximum clock frequency of 20 MHz with 24 I/O ports and an 8-bit data bus. Its 4.5 V to 5.5 V operating supply supports conventional 5 V embedded systems. The through-hole 40-pin PDIP package also facilitates prototyping, inspection, and replacement in control boards where through-hole assembly is preferable to a fine-pitch surface-mount footprint.

The Z8 architecture uses a CISC instruction set optimized for compact embedded control. Because the device is ROMless, the external program-memory interface is central to the system design rather than an optional feature. Engineers should account for address decoding and signal timing when connecting memory, while ensuring that the selected memory device and board-level bus meet the controller's electrical requirements.

Typical applications include industrial control panels, appliance controllers, keypad interfaces, digital sequencers, motor-control logic, and other embedded systems combining external program storage with multiple digital inputs and outputs. Its 24 I/O ports can distribute sensing and actuation functions across a board while leaving a modest number of pins for address, data, control, and power functions.

The primary design consideration is package and memory planning. Confirm the complete pin assignment and external-memory interface in the manufacturer datasheet before assigning board functions, and route critical bus signals away from noisy switching stages. The 40-pin PDIP footprint is mechanically straightforward, but pin availability for a particular application still depends on the external memory architecture and required bus control signals.

This page combines core device characteristics, replacement guidance, package considerations, and practical selection criteria. It is intended to help engineers determine whether the Z86C9320PSG fits an existing 40-pin control-board design and what must be checked before committing to a replacement or redesign.

بدائل مباشرة لـ Z86C9320PSG — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع Z86C9320PSG (نفس عامل الشكل والبصمة) — يختلف في Program Memory, Series, Terminal Count.

Zilog
Program Memory: ROMless; external program memory required
Series: Z8 Z8 C93
Terminal Count: 40
قارن مع Z86C9320PSG →

Z86C9320PSC

✅ بديل مباشر
Zilog
📦 40-pin PDIP
8-bit ROMless microcontroller · Z8 Z8 C93 · 20 MHz · 8 bit · ROMless; external program memory required · 16-bit x 16-bit · 32-bit x 16-bit · 3 x 16-bit

تواصل لمعرفة السعر

عرض ورقة البيانات ←

Z86C9320PSG الحدود القصوى والخصائص الكهربائية

Microcontroller Type 8-bit ROMless microcontroller
Architecture Z8 CISC
Maximum Clock Speed 20 MHz
عرض ناقل البيانات 8 bit
جهد التغذية التشغيلي 4.5 V to 5.5 V
I/O Port Count 24 ports
Program Memory External memory required
Package Type 40-pin PDIP
Terminal Count 40 terminals
نمط التركيب Through-hole
Temperature Grade Commercial
حالة دورة الحياة Active
Series Z8
Product Family Z86C93

دليل تكوين أطراف Z86C9320PSG 40-pin pdip

تكوين الأطراف لـ Z86C9320PSG (حزمة 40-pin pdip). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 40-pin pdip لـ Z86C9320PSG

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ Z86C9320PSG.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

Z86C9320PSG مناسب لـ 6 التطبيقs: Industrial Control Panels, Appliance Control Logic, Keypad and Human-Interface Control, Digital Sequencer and Stepper Logic, Embedded Measurement Interface, Programmable Logic Controller.

🏭

Industrial Control Panels

The Z86C9320PSG fits an industrial control panel that requires numerous digital interactions and externally managed firmware. Its 20 MHz Z8 CISC processor provides sequential control performance, while 24 I/O ports can support keys, indicators, discrete sensors, relays, and actuator commands. The 40-pin PDIP package is particularly practical for prototypes and through-hole production boards. Because the controller is ROMless, program storage is placed externally, allowing firmware organization and upgrade strategy to follow the panel's requirements rather than a fixed internal memory size.

🔧

Appliance Control Logic

The Z86C9320PSG is suitable for appliance control logic combining external program storage with a broad set of digital signals. Its 24 I/O ports can organize button inputs, mode indicators, solenoids, and discrete interlocks, while the 20 MHz clock supports responsive state-machine control. Operating from 4.5 V to 5.5 V simplifies integration with conventional 5 V control logic. The through-hole 40-pin PDIP footprint also makes the device approachable for hand-built prototypes and repair assemblies where solderability and clear pin access are important.

🧩

Keypad and Human-Interface Control

The Z86C9320PSG can implement keypad scanning, mode selection, display sequencing, and switch management in a human-interface controller. Twenty-four I/O ports provide ample digital capacity for matrix keys, status lamps, and related interface signals, while the 8-bit bus supports an external program-memory implementation. The 20 MHz Z8 CISC core is appropriate for deterministic polling and debounce routines. Designers should assign pins according to the manufacturer datasheet because the external-memory bus occupies pins that cannot simultaneously be used as general-purpose I/O.

⚙️

Digital Sequencer and Stepper Logic

The Z86C9320PSG can serve as the central sequencer for relays, solenoids, lamps, and discrete stepper-control stages. Its 20 MHz operating speed supports timing tasks, state transitions, and input polling, while 24 I/O ports simplify the distribution of control and status signals. The ROMless architecture allows operating firmware to remain in external memory, which can be useful when diagnostics or sequence tables need a flexible storage arrangement. Timing-critical outputs should nevertheless be checked against the electrical characteristics and external timing requirements.

📟

Embedded Measurement Interface

The Z86C9320PSG is useful in an embedded measurement front end that gathers switch states or digital transducer information and coordinates downstream processing. Its 24 I/O ports provide multiple channels for enables, ready signals, threshold indicators, and inter-device communication, while the external program-memory interface separates firmware storage from the controller itself. The 20 MHz clock is sufficient for supervisory measurement logic rather than high-rate signal analysis. Precise analog measurement functions would require additional converters or analog circuitry beyond the microcontroller's stated digital characteristics.

🖥️

Programmable Logic Controller

The Z86C9320PSG can act as the processor in a small programmable logic controller handling discrete inputs and outputs. Its 8-bit architecture, 24 I/O ports, and maximum 20 MHz clock are aligned with relay logic, counter, timer, latch, and basic sequencing functions. External program storage gives the designer control over firmware organization and may simplify coordinated updates in multi-board equipment. For safety-related or electrically noisy installations, add appropriate isolation, surge protection, grounding, and environmental qualification around the controller.

What is the Z86C9320PSG?
The Z86C9320PSG is a Zilog Z8 8-bit, ROMless, CISC microcontroller rated for operation at up to 20 MHz. It uses an 8-bit data bus, operates from 4.5 V to 5.5 V, provides 24 I/O ports, and is offered in a 40-pin PDIP package. According to the Zilog product information and the manufacturer datasheet, the device requires external program memory.
What are the key specifications of Z86C9320PSG that engineers should know?
The Z86C9320PSG combines a 20 MHz maximum clock speed, an 8-bit data bus, a 4.5 V to 5.5 V supply range, and 24 I/O ports in a 40-pin PDIP package. The manufacturer datasheet identifies it as a Z8 ROMless CISC microcontroller, meaning the processor must access external program storage. These figures define its suitability for conventional 5 V embedded-control boards rather than low-voltage or high-performance processor systems.
Where to download the Z86C9320PSG datasheet PDF?
The Z86C9320PSG datasheet can be located through the manufacturer product resources linked from the component listings, while the verified datasheet index provides a direct technical document reference. Use the Zilog datasheet for the authoritative package drawing, complete pin descriptions, electrical characteristics, timing diagrams, and external-memory interface. The device is also identified as an 8-bit, 20 MHz ROMless Z8 controller in the manufacturer datasheet.
Where can I find the Z86C9320PSG pinout?
The Z86C9320PSG pinout should be taken from the manufacturer datasheet because the component uses a 40-pin PDIP package with external-memory and control signals in addition to its 24 I/O ports. Assign pins only after checking the complete pin-description table and external bus requirements. A package drawing alone is insufficient to determine whether a particular pin can be reassigned in a specific memory configuration.
Is Z86C9320PSG suitable for an industrial control board?
The Z86C9320PSG is suitable for many 5 V industrial control functions because it combines a 20 MHz Z8 CISC processor, 24 I/O ports, an 8-bit data bus, and a through-hole 40-pin PDIP package. Its commercial temperature grade and operating limits must still be checked against the enclosure temperature. External program memory, bus timing, input thresholds, output drive, and isolation requirements remain the principal design constraints.
What can replace the Z86C9320PSG?
The Z86C9320PSC is a verified drop-in replacement candidate for the Z86C9320PSG. The comparison identifies matching terminals, package, performance parameters, and functional characteristics, with no PCB modification required. According to the component comparison, the Z86C9320PSC provides the closest documented replacement; engineers should still verify the exact suffix, electrical grade, pin orientation, and production requirements before substitution.
Is Z86C9320PSG the same as Z86C9320PSC?
The Z86C9320PSC and Z86C9320PSG are functionally and pin compatible drop-in alternatives with consistent package and performance characteristics. The comparison states that replacement does not require circuit or package modification. Because the two ordering codes may represent different qualification or commercial arrangements, confirm the ordering information, temperature grade, and marking requirements before approving either part for production.
When should I choose Z86C9320PSG over Z86C9320PSC?
Choose the Z86C9320PSG when its exact Zilog ordering code matches the required commercial qualification, documentation, and supply arrangement for an established design. Choose the Z86C9320PSC when it is the approved drop-in source for that design and its ordering conditions are acceptable. Since both devices use the same 40-pin package and closely matched functional characteristics, procurement conditions and traceability are usually the decisive factors.
What is the difference between Z86C9320PSG and Z86C9320PSC?
The documented technical difference between the Z86C9320PSG and Z86C9320PSC is not a change in pinout or core functionality; the cross-reference describes their terminals, package, performance parameters, and functional characteristics as consistent. Both are 40-pin Z8 ROMless 8-bit microcontrollers for 20 MHz operation. Review the manufacturer ordering information for commercial, temperature, qualification, and lifecycle details associated with each suffix.
Where to buy Z86C9320PSG online?
Use the Request a Quote form on this page to request Z86C9320PSG availability, formal quotations, lead time, and order handling from XAIPART. The part is an active Zilog 8-bit, 20 MHz ROMless microcontroller in a 40-pin PDIP package. Include your required quantities, target date, and acceptable packing configuration so the commercial response reflects the actual production requirement.
What is the price of Z86C9320PSG?
The current commercial price for Z86C9320PSG should be obtained through the Request a Quote form on this page because quotations can depend on order quantity, inventory, packing, and delivery terms. The device is an active 40-pin PDIP Z8 ROMless microcontroller with a 20 MHz clock and 24 I/O ports. Submit the required quantity to receive a current quotation tied to the exact Z86C9320PSG ordering code.
What is the lead time for Z86C9320PSG?
The current lead time for Z86C9320PSG should be confirmed through the Request a Quote form on this page. Lead time depends on supplier inventory, manufacturing status, quantity, and the delivery schedule requested by the project. Because the device is listed as active, submit the planned order quantity and required date to obtain a scheduling response for the exact 40-pin PDIP component.
Is Z86C9320PSG in stock?
Stock for Z86C9320PSG should be requested through the Request a Quote form on this page so the response reflects current inventory and the exact order quantity. The Zilog device is identified as an active 8-bit, 20 MHz ROMless microcontroller in a 40-pin PDIP package. Provide quantity, target date, and acceptable packing requirements when requesting a current availability confirmation.
Does the Z86C9320PSG support external program memory?
The Z86C9320PSG supports an external program-memory architecture because it is classified as a ROMless Z8 microcontroller. Its processor operates at up to 20 MHz and communicates through an 8-bit data bus, while the 40-pin PDIP package exposes the required address, data, and control connections. The manufacturer datasheet should govern the exact memory-device selection, address decoding, and timing configuration.
What is the best Zilog equivalent for Z86C9320PSG?
The best documented Zilog equivalent for the Z86C9320PSG is the Z86C9320PSC. The verified comparison describes the two devices as completely replaceable because their terminals, package, performance parameters, and functional characteristics are consistent and no modification is required. Both use the same 40-pin PDIP footprint, making this a true drop-in choice rather than a cross-package or merely functional substitute.

بيانات مرجعية هندسية لـ Z86C9320PSG — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the Z86C9320PSG for an existing 5 V embedded-control design that requires a Z8 8-bit ROMless microcontroller, a 20 MHz operating speed, 24 I/O ports, and a 40-pin PDIP footprint. It is especially practical for relay and sequencer logic, appliance controllers, keypad interfaces, and industrial panels that use external program memory. The Z86C9320PSC is the documented drop-in option when its ordering and qualification conditions match the project, because its package, terminals, performance, and functional characteristics match the target and no modification is required. Neither part should be selected for a design requiring internal ROM, substantially more I/O, lower-voltage operation, or a surface-mount package without checking the complete device specifications. Before substitution, verify the manufacturer pin table, external-memory timing, operating-temperature requirements, electrical characteristics, and lifecycle status for the exact suffix.

المقارنة مع البدائل

المعامل هذا المنتج Z86C9320PSC
Brand Zilog Zilog
Package 40-pin PDIP 40-pin PDIP - same
Architecture Z8 CISC Z8 CISC
Data Bus Width 8 bit 8 bit
Maximum Clock Speed 20 MHz 20 MHz
Operating Supply Voltage 4.5 V to 5.5 V 4.5 V to 5.5 V
I/O Port Count 24 ports 24 ports
Program Memory External memory required External memory required
Pin Compatibility 40-pin PDIP Pin-to-pin compatible; no modification required

أبرز الفروقات

  • Direct pin-compatible replacement path (مقابلZ86C9320PSC)
  • ROMless firmware architecture (مقابلZ86C9320PSC)
  • Through-hole integration (مقابلZ86C9320PSC)

ملاحظات التصميم

Plan the 40-pin PDIP footprint around the external program-memory bus rather than treating every non-power pin as general-purpose I/O. Reserve the address, data, and control pins required by the chosen memory architecture, then assign the remaining pins to board functions. Verify final pin names and numbering against the manufacturer datasheet and preserve adequate clearance around the socket or through-hole pattern for inspection and rework.

Operate the controller from a regulated source within the documented 4.5 V to 5.5 V range. Decouple the supply pins close to the device and keep memory and I/O return currents on a low-impedance ground path. If the board also drives relays, solenoids, lamps, or motors, separate their high-current paths from the microcontroller supply and use suitable protection so switching transients do not disturb the 8-bit bus.

Keep the external data and address traces short, route them consistently, and place any required termination or support components according to the manufacturer's bus guidance. Avoid routing the bus beside switching-regulator power nodes, relay contacts, or high-current motor traces. Although the clock reaches 20 MHz, signal quality depends on memory-device timing, trace topology, grounding, and the actual clock and address-line edge rates used by the design.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The commercial temperature grade is identified for Z86C9320PSG. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or an authoritative product document.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

Z86C9320PSG datasheet Z86C9320PSG pinout Z86C9320PSG datasheet pdf Z86C9320PSG equivalent Z86C9320PSG replacement Z86C9320PSG vs Z86C9320PSC Z86C9320PSG price Z86C9320PSG stock Zilog Z86C9320PSG Z86C9320 40 pin PDIP

المكونات والمصطلحات ذات الصلة

Zilog Z86C9320PSG Z86C9320PSC Z8 Z86C93 8-bit microcontroller embedded microcontroller ROMless microcontroller CISC architecture Z8 CISC external program memory 8-bit data bus 20 MHz clock 24 I/O ports 40-pin PDIP through-hole package industrial control appliance control programmable logic controller digital sequencer external memory bus supply voltage semiconductor integrated circuit
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر