Zilog

Z86E0812SEC - 8-Bit 12MHz 2KB OTP MCU | Zilog

MPN: Z86E0812SEC ✓ نشط
18-pin SOIC Package 12 MHz Speed One-time programmable (OTP) Memory
الحد الأدنى للطلب: 1 |

Z86E0812SEC نظرة عامة

Zilog Z86E0812SEC is an 8-bit Z8 OTP microcontroller with a 12 MHz maximum operating frequency, 2 KB of one-time-programmable program memory organized as 2K x 8, and an 18-pin SOIC package. The Z86 family is designed for compact embedded-control systems where a low-cost, OTP-based architecture provides sufficient program storage for control logic, peripheral coordination, and simple user interfaces.

An OTP microcontroller is a type of embedded-control semiconductor that combines a CPU, nonvolatile program memory, digital I/O, timers, and communication peripherals on one integrated circuit. Its hierarchy extends from the Z86 OTP microcontroller to the broader categories of 8-bit microcontroller, embedded processor, and system-on-chip. Unlike devices with mask-programmed ROM, the Z86E0812SEC allows its program memory to be written during manufacturing or final programming, which supports configuration-specific firmware without requiring mask changes.

The principal operating specifications are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, and an 8-bit CPU architecture. The 18-pin SOIC package provides a surface-mount footprint suitable for compact control assemblies. These characteristics make the device appropriate for applications requiring modest processing capacity and several digital interfaces rather than high-speed control, large data storage, or sophisticated graphics.

The Z86E0812 device family is built around an 8-bit microcontroller architecture and OTP program memory. Its small program-memory capacity favors compact, deterministic firmware with tightly bounded tasks. This limitation should be considered when selecting the device for data logging, graphical interfaces, protocol stacks requiring large buffers, or applications that need to retain changing parameters in writable nonvolatile memory.

Typical uses include temperature-control instruments, small appliance controllers, industrial sensing modules, building equipment interfaces, and compact motor or actuator controllers. The 12 MHz clock permits straightforward multitasking and peripheral servicing in modest embedded systems, while the 2 KB OTP region is sufficient for short control routines and fixed configuration logic. The 18-pin SOIC package also simplifies assembly where through-hole or larger-footprint packages would be undesirable.

Before finalizing a circuit, use the manufacturer pin-description table to assign signals and confirm oscillator, reset, I/O, and programming connections. Check the exact temperature variant and every operating limit against the Zilog Z86E0812 family documentation. The Suffix C ordering code identifies the extended-temperature product, but the complete operating-temperature limits and absolute maximum ratings should be taken directly from the family datasheet.

This product page combines the confirmed Z86E0812SEC identity, memory, clock, architecture, and package information with engineering-oriented application guidance, selection criteria, and a documented drop-in comparison. It also distinguishes the confirmed same-package family alternative from cross-package options so engineers can focus first on designs that preserve the existing PCB footprint.

بدائل مباشرة لـ Z86E0812SEC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع Z86E0812SEC (نفس عامل الشكل والبصمة) — يختلف في Product Type, Temperature Grade.

Zilog
Product Type: 8-bit Z8 OTP microcontroller
Temperature Grade: Industrial
قارن مع Z86E0812SEC →

Z86E0812SEG

✅ بديل مباشر
Zilog
📦 18-pin SOIC
8-bit Z8 OTP microcontroller · 12 MHz · One-time programmable (OTP) · 2 KB (2K x 8) · 4.5 V to 5.5 V · 14 ports · 8-bit · 18-pin SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

Z86E0812SEC الحدود القصوى والخصائص الكهربائية

Product Type 8-bit OTP microcontroller
Microcontroller Family Z8 Z8
CPU Architecture 8-bit
Maximum Operating Frequency 12 MHz
Program Memory Type One-time programmable (OTP)
Program Memory Capacity 2 KB
Program Memory Organization 2K x 8 bits
العلبة 18-pin SOIC
نوع التركيب Surface mount
Temperature Grade Extended temperature

دليل تكوين أطراف Z86E0812SEC 18-pin soic

تكوين الأطراف لـ Z86E0812SEC (حزمة 18-pin soic). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 18-pin soic لـ Z86E0812SEC

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ Z86E0812SEC.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

Z86E0812SEC مناسب لـ 6 التطبيقs: Temperature Control Instruments, Small Appliance Controllers, Industrial Sensing Modules, Building Equipment Interfaces, Compact Motor and Actuator Control, Fixed-Function Consumer Products.

🌡️

Temperature Control Instruments

The Z86E0812SEC fits compact temperature controllers that require deterministic sensor reading, timing, and actuator control. Its 8-bit architecture runs at up to 12 MHz, while 2 KB of OTP program memory can hold a fixed control loop, hysteresis logic, calibration constants, and a simple status interface. The extended-temperature ordering option is useful when the controller operates in a heated enclosure, appliance, or industrial enclosure with elevated internal ambient temperature. Use the family datasheet to confirm the exact operating limits, oscillator arrangement, and sensor interface. Keep the firmware bounded because program memory is one-time programmable and cannot be updated in the field without a replacement strategy.

🔧

Small Appliance Controllers

Z86E0812SEC can serve as the controller in a small appliance where fixed logic coordinates relays, indicators, buttons, and a simple motor or heating element. The 12 MHz maximum clock provides ample execution capacity for short routines, debouncing, state-machine control, and periodic sensing, while the 18-pin SOIC package supports a compact surface-mount layout. Its 2 KB OTP program memory is appropriate for code that does not need frequent firmware updates. The main engineering constraint is code and data planning: map timers and I/O early, avoid unnecessary protocol buffers, and reserve memory for startup validation and failure-safe output states before programming the OTP array.

🏭

Industrial Sensing Modules

The Z86E0812SEC is appropriate for compact industrial sensing modules that translate a limited set of digital or conditioned analog inputs into alarms, counts, and status outputs. At 12 MHz, the 8-bit processor can service timers, debouncing, switch states, and low-speed communication without a more complex controller. Its extended-temperature ordering option supports designs where internal enclosure temperature exceeds the standard-temperature range of the Z86E0812SEG. Designers should minimize switching-node proximity, provide stable clock and reset behavior, and separate sensitive sensor routing from relay or actuator outputs. Confirm the complete electrical limits and peripheral assignments in the Zilog family documentation.

🏠

Building Equipment Interfaces

Z86E0812SEC can act as a compact interface controller for building equipment that requires fixed command handling, sensor polling, and status reporting. The 8-bit architecture and 12 MHz operating frequency are suitable for scheduled input sampling, debounced controls, and simple supervisory logic rather than intensive protocol processing. The 18-pin SOIC footprint allows placement on a small controller PCB, while the extended-temperature ordering option is advantageous in equipment rooms where internal temperatures can rise. Select the alternate Z86E0812SEG only when its standard-temperature limits cover the installation. Validate startup behavior, output defaults, and communication timing before committing the OTP program.

⚙️

Compact Motor and Actuator Control

The Z86E0812SEC can manage low-complexity motor or actuator sequences where the controller must enforce timing, direction, limits, and safety interlocks. Its 12 MHz clock supports responsive state-machine execution, while 2 KB of OTP memory is enough for compact motion tables and fault handling when the design avoids large libraries. The 18-pin SOIC package keeps the controller compact, and the extended-temperature option supports equipment with elevated internal ambient conditions. Use external driver circuitry for loads rather than driving motors directly. Confirm timer and I/O assignments, provide defined output states during reset and startup, and verify timing against the worst-case electrical limits in the manufacturer documentation.

📱

Fixed-Function Consumer Products

Z86E0812SEC is well suited to fixed-function products in which a short feature set replaces a larger programmable controller. Examples include simple keypads, timers, display-sequencing modules, and accessory controllers that require several digital outputs and deterministic behavior. The 2 KB OTP region supports compact application code, the 12 MHz clock provides straightforward peripheral servicing, and the 18-pin SOIC package simplifies automated surface-mount assembly. Because OTP memory cannot be rewritten in the field, production testing and recovery planning are important. Develop the firmware with a conservative memory budget, test boundary conditions thoroughly, and compare the Z86E0812SEG when standard-temperature operation is sufficient.

What is the Z86E0812SEC?
The Z86E0812SEC is a Zilog 8-bit Z8 OTP microcontroller operating at up to 12 MHz, with 2 KB of program memory organized as 2K x 8. According to the Zilog Z86E0812 family documentation, it is packaged in an 18-pin SOIC for surface-mount assembly. The device is intended for compact embedded-control products requiring fixed application firmware and a modest number of digital interfaces.
What are the key specifications of Z86E0812SEC that engineers should know?
The Z86E0812SEC combines an 8-bit CPU, 12 MHz maximum operating frequency, 2 KB of OTP program memory, and an 18-pin SOIC package. According to the Zilog Z86E0812 family datasheet, program memory is organized as 2K x 8. The principal design consideration is the small 2 KB program region, which suits compact control firmware but limits application code, buffering, and protocol complexity.
How much program memory does Z86E0812SEC have?
The Z86E0812SEC contains 2 KB of one-time-programmable memory, organized as 2K x 8 bits. According to the Zilog Z86E0812 family documentation, this memory is programmed once and is intended for the final fixed firmware image. It is adequate for small control routines but not suited to applications requiring large code images, extensive logging buffers, or routinely updated nonvolatile parameters.
What is the maximum clock frequency of Z86E0812SEC?
The maximum operating frequency of Z86E0812SEC is 12 MHz. According to the Zilog Z86E0812 family datasheet, this clock supports an 8-bit embedded-control architecture and routine servicing of timers, digital I/O, and serial functions. Design the oscillator and clock-distribution section for the voltage and frequency limits stated in the family documentation.
Where can I download the Z86E0812SEC datasheet PDF?
The Z86E0812 family PDF can be located through the Zilog documentation archive or the linked Z86E0812 datasheet index on this page. Use the family document covering the 18-pin SOIC device when assigning pins, programming OTP memory, selecting the clock source, and checking electrical limits. Confirm that the document revision applies to the Z86E0812SEC temperature grade before releasing production hardware.
Where can I find the Z86E0812SEC pinout?
Use the pin-description table in the Zilog Z86E0812 family datasheet for the exact 18-pin SOIC pinout. The confirmed package contains 18 leads, but the public source excerpts do not expose every signal name. Assign power, ground, reset, oscillator, programming, and I/O connections from the manufacturer table rather than inferring positions from a generic 18-pin drawing.
What can replace the Z86E0812SEC?
The closest confirmed same-footprint replacement is the Z86E0812SEG, which uses the same Z86E0812 family and 18-pin SOIC architecture but represents the standard-temperature ordering option. The Z86E0812SEC is the extended-temperature variant. Before substitution, verify that the standard-temperature limits satisfy the product’s worst-case operating environment and confirm programming and pin compatibility against the Zilog datasheet.
Is Z86E0812SEC the same as Z86E0812SEG?
The Z86E0812SEC and Z86E0812SEG share the Z86E0812 8-bit, 2 KB OTP device family and 18-pin SOIC package, but their temperature ordering options differ. The Z86E0812SEC is identified as the extended-temperature variant, while Z86E0812SEG is the standard-temperature version. They are pin-compatible for PCB reuse, but temperature qualification must satisfy the target product’s requirements.
When should I choose Z86E0812SEC over Z86E0812SEG?
Choose the Z86E0812SEC when the assembly must use the extended-temperature ordering option and the product’s thermal environment exceeds the standard-temperature limits of the Z86E0812SEG. The two devices retain the same 8-bit architecture, 12 MHz clock, 2 KB OTP memory configuration, and 18-pin SOIC footprint, making the distinction primarily a temperature-qualification decision.
Is Z86E0812SEC suitable for a temperature controller?
Yes, the Z86E0812SEC is suitable for a compact temperature controller when the control program fits within 2 KB of OTP memory and the required peripheral set remains modest. Its 12 MHz clock supports deterministic control-loop and interface servicing, while the extended-temperature ordering option suits environments beyond standard-temperature requirements. Confirm sensor-conditioning accuracy and actuator timing in the complete system design.
Z86E0812SEC vs Z86E0812SEG: which is better for industrial equipment?
The Z86E0812SEC is generally the better choice for industrial equipment when its extended-temperature qualification is required by the enclosure temperature. The Z86E0812SEG is appropriate when the operating environment remains within its standard-temperature limits. Both use the same 18-pin SOIC footprint and provide 8-bit processing at 12 MHz with 2 KB of OTP program memory, so PCB reuse is practical.
What is the best Zilog equivalent for Z86E0812SEC?
The best confirmed Zilog equivalent is the Z86E0812SEG because it retains the Z86E0812 family architecture and 18-pin SOIC footprint. Both parts provide 8-bit processing, a 12 MHz maximum frequency, and 2 KB of OTP memory. The meaningful selection criterion is temperature grade: use Z86E0812SEC for extended-temperature requirements and Z86E0812SEG only when standard-temperature limits are adequate.
Where can I buy Z86E0812SEC online?
Use the Request a Quote form on this page to request Z86E0812SEC pricing, current stock, minimum order quantity, and lead time. The form provides a direct purchasing path without relying on potentially stale static pricing. Include the required package suffix EC and any programmed-memory or delivery requirements in the request.
What is the price of Z86E0812SEC?
Current Z86E0812SEC pricing is obtained through the Request a Quote form on this page. The form can return a quote based on order quantity, programmed-memory requirements, and current availability. No static price figure is shown because market pricing and configuration requirements can change; submit the exact MPN and quantity for an actionable quotation.
What is the lead time for Z86E0812SEC and is it in stock?
Request current stock status, manufacturing lead time, and minimum order quantity through the Request a Quote form on this page. Include the exact Z86E0812SEC suffix, programming requirements, and requested delivery date. This avoids treating a distributor landing-page message as a guaranteed inventory commitment and provides an up-to-date sourcing response for the required configuration.

بيانات مرجعية هندسية لـ Z86E0812SEC — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the Z86E0812SEC when a compact controller needs an 8-bit Z86 architecture, a 12 MHz operating limit, 2 KB of OTP program memory, and extended-temperature ordering. It is appropriate for fixed-function appliance, sensing, building-equipment, and actuator-control products where the firmware fits permanently within the 2 KB program region. The Z86E0812SEG is the practical same-package alternative when standard-temperature qualification covers the complete operating environment; its architecture, clock, memory, and PCB footprint remain aligned. If a design requires substantially more program memory, frequently changed parameters, or a different pin arrangement, do not treat either device as a drop-in solution and redesign around a higher-capacity microcontroller. Before final selection, verify supply voltage, oscillator requirements, reset behavior, peripheral availability, and the exact operating-temperature limits in the manufacturer family documentation.

المقارنة مع البدائل

المعامل هذا المنتج Z86E0812SEG
Manufacturer Zilog Zilog
Package 18-pin SOIC 18-pin SOIC
CPU Architecture 8-bit 8-bit
Maximum Operating Frequency 12 MHz 12 MHz
Program Memory 2 KB OTP 2 KB OTP
Program Memory Organization 2K x 8 2K x 8
Temperature Ordering Option Extended temperature Standard temperature
Mounting Type Surface mount Surface mount
Memory Type One-time programmable One-time programmable

أبرز الفروقات

  • Extended-temperature ordering option (مقابلZ86E0812SEG)
  • Direct PCB footprint reuse (مقابلZ86E0812SEG)
  • Compact fixed-function control capability (مقابلZ86E0812SEG)

ملاحظات التصميم

Treat the 2 KB OTP region as the complete firmware budget and account for startup code, constants, interrupt routines, and application logic before programming. OTP cannot be rewritten in the field, so a programming error requires board rework or device replacement. Establish a verified programming procedure, inspect the final program image, and test boundary conditions on representative units before production release.

Use the 18-pin SOIC footprint and place the oscillator, reset, and decoupling components according to the family reference layout. Keep traces associated with sensitive sensor inputs away from relays, motor drivers, and switching power stages. Provide defined reset behavior and safe output states so that the controller cannot energize an actuator during startup or an oscillator failure.

Confirm the accepted supply-voltage range and maximum supply limits from the Zilog Z86E0812 family documentation before designing the power rail. Place the recommended bypass capacitors close to their associated pins and keep the power-supply return path short. Verify startup current, oscillator settling, and output behavior across the complete input-voltage range rather than testing only at a nominal supply voltage.

Use the extended-temperature Z86E0812SEC ordering option when the internal enclosure temperature can exceed the limits of the standard-temperature Z86E0812SEG. Temperature qualification does not remove the need for thermal design; estimate internal temperature rise from the board environment, enclosure, and nearby heat sources, and preserve airflow around the SOIC package when the enclosure is sealed.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No explicit environmental or material-compliance statements are identified in the cited product information. AEC-Q100 qualification is not indicated for this Zilog microcontroller.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

Z86E0812SEC datasheet Z86E0812SEC pinout Z86E0812SEC datasheet pdf Z86E0812 12MHz microcontroller Z86E0812 2KB OTP Z86E0812 18 pin SOIC Z86E0812SEC replacement Z86E0812SEC equivalent Z86E0812SEC vs Z86E0812SEG Zilog Z86E0812SEC Z86E0812SEC price Z86E0812SEC stock Z86E0812 application circuit

المكونات والمصطلحات ذات الصلة

Zilog Z86E0812SEC Z86E0812SEG Z8 Z8 8-bit microcontroller OTP microcontroller one-time programmable memory embedded controller system-on-chip 12 MHz clock 2 KB program memory 2K x 8 organization 18-pin SOIC SOIC package family surface mount extended temperature digital I/O temperature controller industrial sensing module small appliance controller building equipment interface motor and actuator control fixed-function consumer product RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر