FPGA ও CPLD
পণ্য (7,300+)
EP4CE15E22C7N - Cyclone IV E FPGA, 15K LEs, 144-EQFP | Intel
The Intel (Altera) EP4CE15E22C7N is a Cyclone® IV E Field Programmable Gate Array delivering 15,408 logic elements and 516,096 bits of embedded memory in a 144-pin Enhanced QFP (EQFP-144) package with exposed pad. Built on a low-power 60 nm process, this Cyclone IV E variant targets cost-sensitive, high-volume applications that still require significant logic density, on-chip RAM, and DSP capability. According to Intel product ordering information, this part operates over the commercial temperature range (0 °C to +85 °C) and is supplied in the -7 speed grade for balanced performance and power. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose digital logic fabric, interconnect, and I/O are user-programmable after manufacture. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) and are widely used for parallel processing, custom digital interfaces, glue logic, prototyping ASICs, and signal processing. Cyclone IV E extends this lineage into a low-power family specifically optimized for high-volume, cost-driven designs. Key features include 81 user I/O pins, 56 embedded 18x18 multipliers (DSP blocks), 4 PLLs for clock synthesis, and a configuration architecture supporting serial (AS), parallel (PS), JTAG, and active serial modes. The exposed thermal pad supports conduction cooling and PCB ground reinforcement. Compared with the older Cyclone III family, Cyclone IV E delivers up to 30% lower total power while preserving the Quartus II / Quartus Prime design ecosystem and IP library. Typical applications include industrial motor control, factory automation controllers, video surveillance and image processing front-ends, automotive infotainment prototypes, communication bridges (UART/SPI/I2C fan-out, PCIe endpoint soft IP), and educational development boards. The 144-pin EQFP footprint makes hand-soldering feasible for prototypes, while the exposed pad remains compatible with standard SMT reflow profiles. When designing with this device, ensure the exposed pad is soldered to a ground copper pour of at least 25 mm² to keep junction temperature within the commercial range. The configuration mode must be selected before VCCIO ramps via the MSEL pins; leaving them floating causes configuration failure. Decouple each VCCINT/VCCIO rail with 0.1 µF + bulk 10 µF ceramic capacitors placed within 5 mm of the respective pins.
EP4CE15E22C8L - 15,408-LE Cyclone IV E FPGA | Altera
The Altera EP4CE15E22C8L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 516,096 embedded RAM bits, and 81 I/O in a 144-LQFP exposed-pad package. It is a configurable digital-logic device intended for embedded systems that require programmable combinational and sequential logic, embedded memory, parallel interfaces, and programmable I/O. The C8 ordering designation identifies the commercial speed and temperature grade, while the final L suffix identifies the leaded 144-pin package configuration. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside complex programmable logic devices and programmable system-on-chip devices. Internally, programmable logic elements support Boolean operations, routing networks connect those elements, and embedded RAM blocks provide on-chip data storage. This combination makes an FPGA useful when a design requires several digital functions, flexible interface timing, field updates, or a compact replacement for multiple fixed-function logic devices. The EP4CE15E22C8L provides 15,408 logic elements and 516,096 RAM bits, giving it substantially more configurable capacity than small interface or control FPGAs. Its 81 I/O supports external connections to processors, memories, converters, transceivers, and display or storage peripherals. The 144-LQFP exposed-pad package offers a through-hole assembly format while allowing the center thermal pad to improve heat transfer from the device when the PCB provides a suitable thermal design. The C8 designation corresponds to the commercial operating class used in the Cyclone IV E ordering system. Designers must configure the device using a compatible Altera or Intel FPGA development environment and a Quartus Prime project containing the pin assignments, constraints, and timing requirements for the target board. Configuration storage, clock distribution, reset behavior, and supported I/O standards are established in the device handbook and board-level design documentation. Typical uses include industrial control, instrumentation, communication interfaces, test equipment, embedded signal processing, and general-purpose digital logic platforms. The device is particularly suitable when multiple counters, state machines, protocol engines, data paths, and memory buffers must be consolidated into one programmable component. A hardware design can then be revised by changing the FPGA bitstream rather than redesigning a board with a fixed logic device. Thermal design is a central implementation consideration because logic utilization, switching activity, supply voltage, ambient temperature, and PCB copper area determine junction temperature. Place the exposed pad on a thermal-via field connected to an uninterrupted ground plane, verify the thermal design against the package and device guidance, and maintain the recommended power and I/O configurations. Do not treat the exposed pad as an interchangeable signal pin. This product page combines the exact device identity, package and logic-resource information with procurement guidance, application fit, engineering notes, and a same-package comparison framework. It is intended to help engineers confirm footprint compatibility, assess logic and I/O capacity, plan configuration and thermal implementation, and request current commercial availability before committing the FPGA to a PCB design.
EP4CE15E22C8N - Cyclone IV E FPGA, 15K LE, 144-EQFP | Intel / Altera
The Intel / Altera EP4CE15E22C8N is a Cyclone IV E family Field Programmable Gate Array (FPGA) with 15,408 logic elements, 516,096 bits of embedded memory, and 56 embedded 18x18 multipliers, housed in a 144-pin Enhanced QFP (EQFP-144) package with exposed thermal pad. It is offered in the commercial speed grade 8 with a 1.2V core supply. A Field Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect. FPGAs belong to the broader category of programmable logic devices (PLDs) and sit within the hierarchy of digital integrated circuits. Unlike fixed-function ASICs, FPGAs can be reconfigured in-system to implement custom digital logic, DSP pipelines, memory controllers, and interface protocols, making them ideal for prototyping and low-to-medium volume designs. Key features of the EP4CE15E22C8N include 15,408 logic elements (LEs), 516,096 bits (63 Kbytes) of embedded SRAM, 56 embedded 18x18 hardware multipliers, 4 general-purpose PLLs, and 20 global clock networks. The device supports LVDS, LVTTL, LVCMOS, SSTL, and other I/O standards through 81 user I/O pins. Static power consumption is optimized through Cyclone IV E's low-power process technology targeting under 1.5W typical static power. Architecturally, the EP4CE15E22C8N uses a 60nm low-power CMOS process and the LUT-based logic fabric shared across the Cyclone IV E family. Memory blocks (M9K) deliver true dual-port operation at up to 300 MHz, and the 18x18 multipliers support DSP operations such as FIR filters and FFTs without consuming general logic. Typical applications include industrial control and motor drives, video processing and display controllers, automotive infotainment prototypes, communications protocol bridges, and general-purpose glue logic replacement. Designers also use the EP4CE15E22C8N for PCIe endpoint soft IP (Gen1 capable) when paired with external transceivers. When designing with this device, plan power sequencing (1.2V core before 2.5V/3.3V I/O), use the Quartus Prime design suite for synthesis and place-and-route, and ensure the exposed thermal pad on the EQFP-144 is soldered to a thermal ground plane for adequate heat dissipation. This page synthesizes distributor pricing, drop-in Cyclone IV alternatives, and practical design notes not found in the manufacturer datasheet.
EP4CE15E22C9L - 15,408-Cell 60 nm Cyclone IV E FPGA | Intel
Intel/Altera EP4CE15E22C9L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 81 I/O pins, 516,096 embedded-memory bits, and a 1.2 V core supply in a 144-pin LQFP exposed-pad package. The device is manufactured using 60 nm FPGA technology and provides programmable combinational and sequential logic for embedded control, communications, industrial, and consumer applications. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after fabrication. A configurable FPGA combines programmable logic blocks, embedded memory, and programmable I/O into one device. Within the device hierarchy, the EP4CE15E22C9L belongs to the Cyclone IV E FPGA family, which provides a higher level of integration than basic programmable logic arrays while supporting parallel interface logic, control functions, and moderate levels of on-chip data processing. The Cyclone IV E device provides 15,408 logic elements and 516,096 embedded-memory bits for implementing state machines, datapaths, protocol bridges, controllers, and general-purpose digital logic. Its 81 I/O pins make the device suitable for designs requiring numerous external connections. The 144-pin LQFP exposed-pad package supports conventional surface-mount assembly while providing a thermal and ground connection through its exposed pad. The EP4CE15E22C9L operates from a 1.2 V core supply and uses 60 nm process technology. These figures position it as a low-power, moderately integrated FPGA for cost-sensitive embedded systems. Configuration programming determines the logic implemented inside the device, allowing one physical component to support multiple product functions when appropriate design tools and configuration data are used. Typical uses include industrial automation, communications interfaces, consumer electronics, test equipment, and embedded control systems. The FPGA can implement parallel sensor acquisition, custom protocol handling, timing controls, display or data-acquisition logic, and supervisory functions. Designs combining an FPGA with a microcontroller or dedicated interface IC can partition work between configurable parallel logic and sequential embedded processing. PCB implementation should account for the exposed thermal pad, supply decoupling, configuration pins, and the requirements of the selected Cyclone design tools. Use the manufacturer pin-description table when assigning tracks, and follow the device power-up and configuration sequence before enabling dependent circuitry. Thermal performance and signal integrity depend on stack-up, return paths, component placement, and the switching activity of the implemented logic. This product page consolidates device identity, package details, verified technical parameters, drop-in alternatives, comparison parameters, and practical design guidance. It is intended to accelerate component review while leaving final programming, timing, power, and PCB decisions to the system design engineer.
EP4CE15E22I7 - 15,408-L-cell FPGA | Altera | Industrial Control
The Altera EP4CE15E22I7 is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 81 user I/O, a 1.2 V core supply, and a 144-pin LQFP exposed-pad package. It combines programmable digital logic, fixed hardware multipliers, memory, and general-purpose I/O in one reconfigurable semiconductor. The verified distributor listing identifies 516,096 embedded-memory bits and describes the device as an 81-I/O FPGA in the Cyclone IV E family. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits in the programmable-logic hierarchy above individual gates and below a software-driven microcontroller architecture. Its configurable lookup logic, routing fabric, memory blocks, and dedicated arithmetic resources allow designers to implement parallel control, signal processing, communications, and hardware acceleration without changing the physical PCB. The EP4CE15E22I7 provides 15,408 logic elements for digital state machines, interfaces, and control logic. Its 81 I/O support external digital connections, while 516,096 embedded-memory bits add local data-storage capability. The 1.2 V value reported in the verified data describes the core supply, and the 60 nm process technology identifies the manufacturing node. The 144-pin exposed-pad package provides a defined PCB footprint with a thermal land for heat spreading. Compared with a microcontroller, this FPGA offers parallel hardware execution and deterministic combinational or sequential logic, but it generally requires configuration data and external configuration memory or a boot source. Its reconfigurable architecture is useful when design rules, interface timing, or parallel data paths are more important than software convenience. Designers must also observe power-up, configuration, signal-integrity, decoupling, and thermal requirements. Typical uses include industrial control, instrumentation, communications adapters, embedded test equipment, motor and power-system control, and digital signal-processing front ends. The exposed pad assists package heat dissipation, but actual performance depends on PCB copper area, airflow, switching activity, and the implemented design. For new layouts, retain the manufacturer-recommended power and ground planes, place bypass capacitors close to supply pins, and route sensitive or high-speed signals away from switching nodes. Validate the complete design with timing analysis, power estimation, signal-integrity checks, and thermal testing rather than treating the family-level specifications as a finished-system guarantee. This page consolidates verified distributor specifications, sourcing information, application guidance, and design cautions. Its comparison and selection material is intended to accelerate procurement and engineering review while clearly separating published facts from values that still require manufacturer-datasheet confirmation.
EP4CE15E22I7N - 15,408-Cell Cyclone IV E FPGA | Altera
The Altera EP4CE15E22I7N is a Cyclone IV E field-programmable gate array with 15,408 logic cells, 47 logic blocks, a 1.2 V supply, and a 144-pin exposed-pad EQFP package. It combines programmable digital logic, embedded memory, and configurable I/O in one reconfigurable semiconductor package for cost-sensitive control, interface, and signal-processing systems. A field-programmable gate array, or FPGA, is a programmable digital semiconductor in which the logic and interconnect configuration can be changed after manufacture. An FPGA belongs to the semiconductor and digital-logic hierarchy, where programmable logic is more flexible than fixed-function logic but generally less efficient than a dedicated application-specific integrated circuit. The Cyclone IV E family targets embedded control, communications, industrial, and consumer applications where field updates, design reuse, and moderate logic density are important. The EP4CE15E22I7N provides 15,408 logic cells organized into 47 logic blocks according to the manufacturer Cyclone IV E device information. Its 1.2 V core supply and exposed-pad package support compact board construction, while the E22 designation identifies the device configuration represented by this ordering part number. The 144-pin package exposes digital I/O, power, configuration, clock, and ground connections through a surface-mount footprint. Typical uses include industrial control modules, network-interface bridging, data-acquisition front ends, programmable logic controllers, embedded protocol gateways, and sensor-conditioning systems. A design can implement parallel interfaces, state machines, data buffers, timing logic, and communication-control functions in one FPGA instead of combining several fixed-function ICs. Its value comes from combining software-like design flexibility with deterministic digital hardware behavior. Circuit design should preserve the required power-supply sequencing and decoupling arrangement shown in the manufacturer datasheet. The exposed thermal pad must connect to the appropriate ground-plane structure with careful via placement to support both electrical return paths and heat removal. Configuration interfaces, clock inputs, and high-speed I/O also require controlled routing and return paths to reduce susceptibility to noise and edge-rate distortion. This page combines the exact ordering-part-number attributes, package information, searchable documentation links, and practical implementation considerations into a focused engineering reference. Use the Altera product page and manufacturer datasheet to confirm pin assignment, electrical limits, configuration requirements, and programming compatibility before releasing a production design.
EP4CE15E22I8L - 15,408-Cell Cyclone IV E FPGA | Intel
The Intel EP4CE15E22I8L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 81 I/O, a 1.2 V supply, and a 144-pin LQFP exposed-pad package. It is a 60 nm FPGA intended for programmable logic, control, interface, and embedded-processing designs. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic elements, memory, and input/output resources on one device. An FPGA belongs to the programmable-logic hierarchy, above basic logic gates and below application-specific programmable controllers. Cyclone IV E devices provide a platform for implementing parallel data paths, protocol bridges, control logic, signal acquisition, and general-purpose digital systems. The EP4CE15E22I8L provides 15,408 logic elements and 81 I/O in the 144-LQFP exposed-pad package. The listed device information identifies the supply voltage as 1.2 V. Its 81-I/O count is useful for systems requiring numerous digital connections without moving to a larger ball-grid-array package. The exposed pad supports improved thermal transfer when the board provides suitable copper and thermal-via coverage. Within the Cyclone IV E family, the EP designation identifies the device family, while the numerical portion of the MPN identifies its resource level. The I8L suffix selects the listed package, temperature, and speed-related ordering configuration. Exact programming, timing, and pin-assignment decisions must be based on the device pin list and the Intel Quartus design flow used for the completed design. Typical applications include industrial control, instrumentation, communications interfaces, data-acquisition systems, embedded control, and general-purpose digital logic. Its 81 available I/O can support parallel digital buses, status and control signals, memory interfaces, and peripheral connections when the selected board-level interface voltage is electrically compatible. For a new PCB, preserve the exposed-pad land pattern, assign a solid ground or thermal pad according to the device guidance, and connect unused pins as directed in the pin-assignment tables. PCB signal-integrity and power-distribution design should also account for simultaneous switching across many I/O and the device’s 1.2 V core supply requirements. This page consolidates the verified device identity, package details, resource figures, sourcing information, comparison constraints, and practical implementation guidance. It distinguishes directly confirmed Cyclone IV E variants from broader family devices whose logic-element and package differences prevent them from being treated as drop-in replacements.
EP4CE15F1717N - Cyclone IV E FPGA, 15K LE, 256-BGA | Altera/Intel
The Intel/Altera EP4CE15F1717N is a Cyclone IV E field-programmable gate array (FPGA) with 15,408 logic elements, 516,096 bits of embedded memory, and 165 user I/Os, housed in a 256-ball fine-pitch BGA package. It is fabricated on a low-power 60 nm process and operates with core voltages of 1.0 V (internal) and 1.2 V/2.5 V/3.3 V (I/O banks), while supporting user I/O voltages from 1.2 V to 3.3 V. A Cyclone IV E FPGA is a SRAM-based programmable logic device that combines configurable logic blocks (LABs), embedded M9K memory blocks, embedded 18x18 multipliers, and a programmable interconnect fabric on a single die. The Cyclone IV E family sits below Cyclone IV GX and above legacy Cyclone III in Intel's low-cost, low-power FPGA portfolio, targeting cost-sensitive applications where modest logic density, DSP capability, and low static power are required. Key specifications of the EP4CE15F1717N include 15,408 logic elements, 56 (18x18) hardware multipliers, 516 Kbits of embedded RAM organized as 56 M9K blocks, 4 PLLs, and 165 maximum user I/Os. The device supports up to 343 Mbps LVDS performance and features a commercial speed-grade 7 device with an industrial temperature range option, as encoded by the trailing "I" in similar part numbers. Architecture-wise, the Cyclone IV E FPGA uses a logic array block (LAB) topology of 16 logic elements per LAB, with each logic element containing a 4-input LUT, programmable register, carry chain, and register chain. The embedded M9K memory blocks support true dual-port, simple dual-port, and single-port RAM configurations, and the embedded multipliers support signed and unsigned multiplication in 9-bit, 18-bit, and 36-bit widths. Typical applications include industrial motor control, video processing pipelines, PCIe Gen1 endpoint bridging (with external PHY), low-cost ASIC prototyping, embedded vision, and software-defined radio baseband preprocessing. The combination of moderate logic capacity, integrated DSP blocks, and low power makes it well-suited to battery-backed and thermally-constrained industrial designs. When designing with this device, ensure your Quartus II (or Quartus Prime) project selects the EP4CE15F1717N device, then validate pin assignments against the 256-BGA pinout file. The device is non-volatile-configuration only via an external serial or parallel flash - internal SRAM configuration must be reloaded on every power-up. This page synthesizes distributor pricing, drop-in same-package alternatives from the Cyclone IV E family, and practical design notes not consolidated on a single manufacturer datasheet page.
EP4CE15F17A7N - 15,408-Cell 1.2V FPGA | Intel
The Intel EP4CE15F17A7N is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 472.5 MHz maximum performance and a 1.2 V core supply, housed in a 256-LBGA package. The device belongs to the EP4CE15 F17 device family and targets programmable logic, embedded control, communications and industrial systems requiring a dense, low-voltage FPGA in a surface-mount package. A field-programmable gate array is a programmable digital integrated circuit. Its configurable logic blocks, programmable interconnects and input/output resources allow a hardware design to be implemented and revised through configuration data rather than a fixed circuit layout. Within the semiconductor hierarchy, an FPGA is a programmable logic device, an integrated circuit and a reconfigurable digital-logic component. The Cyclone IV E family combines programmable logic resources with integrated configurable resources for control, signal processing and connectivity-oriented designs. The EP4CE15F17A7N provides 15,408 logic cells, with a comparison reference identifying 963 configurable logic blocks. Its listed maximum frequency is 472.5 MHz, while its core operating voltage is 1.2 V. These figures make the device suitable for designs requiring moderate parallel-processing capacity, deterministic control logic and compact integration without changing the PCB footprint when design requirements evolve. The F17 package designation identifies the physical package configuration used by this ordering part number. The EP4CE15F17A7N is offered in a 256-LBGA package measuring 17 mm by 17 mm, with 256 ball terminals. The component is identified as an automotive-grade Cyclone IV E FPGA and an AEC-Q100 listing, making the temperature qualification relevant for automotive and other demanding embedded applications. Typical design roles include industrial automation controllers, vehicle electronics, communications infrastructure, test equipment and embedded signal-processing systems. Its programmable architecture supports parallel interfaces, control logic and data acquisition in a single device, while the 256-terminal package provides extensive external connectivity for high-pin-count mixed-signal and digital designs. PCB implementation should follow the manufacturer's ball map, power-plane recommendations and decoupling guidance. Because a 256-LBGA device has a dense pitch and numerous supply and ground connections, inspection, assembly and thermal performance depend on careful escape-routing, layer-stack selection and via placement. Use the manufacturer pin and package information to assign every ball and confirm the exact power-domain requirements. This product page consolidates the device's key electrical, logical-capacity, packaging and automotive-qualification facts with practical design guidance, sourcing questions and a same-package migration reference. It is intended to help engineers confirm fit, qualify the device for an application and evaluate a drop-in option without overlooking FPGA-specific package or lifecycle constraints.
EP4CE15F17C6 - 15,408-Cell 1.2V FPGA | Altera | FBGA-256
The Altera EP4CE15F17C6 is a Cyclone IV E field-programmable gate array with 15,408 logic cells, 60 nm process technology, 1.2 V supply, and a 256-pin TFBGA package. It is designed for embedded digital logic, control, communication, and signal-processing systems that require programmable hardware parallelism. An FPGA is a programmable semiconductor containing configurable logic blocks and programmable interconnect. The FPGA hierarchy includes field-programmable gate array, programmable logic device, digital logic IC, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured after manufacture to implement different logic functions, making it useful for product customization, hardware acceleration, prototyping, and evolving system requirements. The supplied data identifies 15,408 logic cells and describes the device as an FPGA with 47 logic blocks, 256 pins, a 1.2 V supply, and 60 nm technology. The F17 package identifier and Cyclone IV E family place the device in Altera's low-power programmable-logic portfolio. Specific I/O counts, memory bits, block counts, speed grade details, operating temperature, and power figures were not included in the verified results and therefore require confirmation from the manufacturer datasheet before final design release. A 256-pin TFBGA is a surface-mount ball-grid package whose dense interconnect supports the device's programmable logic and package-level connections. Package selection affects PCB escape routing, assembly complexity, thermal performance, inspection, and repair. Although the verified search results show distributor availability and an LCSC starting price of $13.4432, procurement should confirm lifecycle status, exact configuration, stock, and authorized supply before committing a production BOM. Typical uses for a Cyclone IV E FPGA include industrial control, embedded communications, sensor aggregation, video or image pipelines, test equipment, and low-power embedded processing. The device can implement parallel datapaths, state machines, protocol interfaces, and control logic in one programmable device. The manufacturer product page should be used to validate timing, pin assignments, configuration requirements, supported tools, and electrical limits before schematic capture. A key engineering consideration is that FPGA replacement is not justified by a similar product description alone. The candidate must use the same package, have a verified ball map and power architecture, provide equivalent I/O resources, and meet the target clock and timing constraints. The verified search results identify EP4CE15F17C7 and EP4CE22F17I7N as related comparison candidates, but they are not automatically drop-in replacements without package, pinout, timing, resource, and lifecycle validation. This page consolidates verified manufacturer, distributor, and cross-reference information with package, procurement, and design cautions for engineers evaluating the EP4CE15F17C6. It intentionally distinguishes confirmed facts from parameters that remain to be checked against the manufacturer datasheet.
EP4CE15F17C6N - Cyclone IV E FPGA, 15408 LE, 256-FBGA | Intel
The Intel (Altera) EP4CE15F17C6N is a Cyclone IV E field-programmable gate array (FPGA) with 15,408 logic elements, 963 configurable logic blocks and 165 user I/O, packaged in a 256-ball FBGA (256-LBGA) measuring 17 x 17 mm on a 1 mm ball pitch. The device runs from a 1.2 V core supply and is offered in a lead-free assembly for surface-mount production. An FPGA (field-programmable gate array) is a semiconductor device whose digital logic, interconnect and I/O are configured after manufacture, so a single silicon part can implement many different circuit functions. Within the power management IC and digital ASIC hierarchy, an FPGA sits above fixed-function logic and below an ASIC: it offers field-updatable parallelism, deterministic timing and reconfigurability in exchange for higher unit cost than a mask-programmed ASIC. The Cyclone IV E family targets cost-sensitive, low-power embedded designs. Key device attributes include 15,408 logic elements organized as 963 logic blocks, 165 dedicated user I/O pins, 516,096 bits of listed embedded memory and a stated maximum operating frequency of 472.5 MHz. The 256-ball FBGA keeps the die compact while still exposing enough I/O for external DDR memory, parallel data buses and industrial peripheral interfaces. The 15,408-logic-element density matters because it defines how much combinational and sequential logic can be mapped before the device runs out of routing resources. The 963 configurable logic blocks each carry a 4-bit lookup table, so total logic capacity scales with block count rather than raw I/O count. The listed 472.5 MHz figure is the headline performance class for the F17 speed grade, which determines how fast external memory interfaces and logic pipelines can be clocked. Typical uses include industrial control and factory automation gateways, video and image processing front ends, communications and protocol-conversion equipment, instrumentation front panels, and low-cost embedded systems requiring high logic density with a small package footprint. Because the device is reconfigurable, one PCB can cover several product variants by swapping the bitstream. When designing around this part, budget the 1 mm ball-pitch BGA layout early: it demands careful escape routing, via-in-pad or via-under-ball strategies, and X-ray or cross-section inspection after reflow. Plan the core, I/O and auxiliary supply rails as separate filtered domains, and confirm the exact speed and temperature grade ordering suffix against your production requirements before releasing a design. This page consolidates distributor availability, package-level detail, drop-in replacement options and practical layout guidance for the Cyclone IV E family, so you can qualify the EP4CE15F17C6N for an existing 256-FBGA board without re-running the full device selection from scratch.
EP4CE15F17C7 - Cyclone IV E FPGA 15K LE 256-BGA | Altera | XAIPART
The Altera (Intel) EP4CE15F17C7 is a low-power, high-volume Cyclone IV E FPGA with 15,408 logic elements (LE), 516,096 bits of embedded memory, and 166 embedded 18x18 multipliers, housed in a 256-pin FineLine BGA package. It is fabricated on a 60 nm process with a 1.2 V core supply and supports commercial temperature grades of 0C to +85C, with up to 343 user I/O pins and 165 user I/O on the F17 package variant. An FPGA (Field Programmable Gate Array) is a reprogrammable logic device that lets engineers implement custom digital circuits, processors, and high-speed interfaces without the cost and lead time of an ASIC. FPGAs sit above microcontrollers in design flexibility and below ASICs in unit cost: where a microcontroller executes fixed instruction sets, an FPGA realizes parallel hardware fabric, while an ASIC burns fixed silicon. The Cyclone IV E family targets cost-sensitive, high-volume applications like industrial control, video bridging, and consumer electronics where low static power and rich DSP/memory resources matter more than raw logic density. Key features of the EP4CE15F17C7 include dedicated hardware multipliers for DSP blocks, embedded M9K memory blocks totalling 504 Kbits, four general-purpose PLLs for clock management, and built-in support for common I/O standards including LVDS, LVCMOS, and SSTL. The device supports configuration via JTAG, AS, PS, and FPP modes, and integrates Altera (Intel) Quartus II design software support. Architecturally, the EP4CE15F17C7 uses 4-input look-up tables (LUTs) combined with adaptive logic modules (ALMs) for efficient logic packing, and its 8-channel high-speed serial interface is omitted (no transceivers) in favor of low-cost parallel I/O - the E variant vs the GX variant. Operating power is controlled through hot-socketing support and multiple power-saving modes managed via Quartus. Typical applications include video surveillance IP cameras, industrial machine vision, motor control peripherals, USB/Ethernet bridging, LED display controllers, and consumer audio/video processing. Its mix of DSP blocks and memory also suits software-defined radio baseband and protocol conversion cards. When designing with this FPGA, ensure the PCB uses 1.0 mm pitch BGA routing with proper via-in-pad or microvia stack-up; the 256-pin FBGA demands a 17x17 mm land pattern with 8-layer stack-up minimum for signal integrity. Static power is dominated by I/O bias currents, so unused I/O banks should be disabled in Quartus pin planner. This page synthesizes distributor pricing, drop-in Cyclone IV E family alternatives, and practical PCB/timing design notes not found in the standalone datasheet PDF.
EP4CE15F17C7N - 15K Logic Cell Cyclone IV E FPGA | Altera
The Altera EP4CE15F17C7N is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 165 I/O, and a 256-LBGA package. The device uses 60 nm process technology and supports a 1.2 V core supply, making it suitable for embedded control, industrial automation, communications, and signal-processing designs that require programmable hardware alongside external memories and interfaces. A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy and provides configurable logic elements, embedded memory, multipliers, clock resources, and general-purpose I/O within one integrated circuit. The Cyclone IV E family is positioned between simple programmable-logic devices and larger FPGAs for cost-sensitive embedded applications. The EP4CE15F17C7N provides 15,408 logic elements, 165 I/O, 256,064 bits of embedded memory, and 231 embedded multipliers according to the manufacturer datasheet information. Its 256-LBGA package supports high-density board layouts while keeping the device suitable for multilayer PCB construction. The F17 speed grade and C7 commercial temperature designation identify the device's performance and operating options. The Cyclone IV E architecture combines programmable logic with dedicated memory and arithmetic resources, allowing designers to implement parallel datapaths, control logic, protocol handling, and signal processing without implementing a fixed-function ASIC. Its 1.2 V core operation and 60 nm fabrication process support a balance between logic capacity, power consumption, and integration for industrial, commercial, and embedded systems. Typical designs include industrial controllers, data-acquisition systems, communications equipment, embedded vision processors, and general-purpose programmable control platforms. The 165 available I/O can be assigned among the device's supported interfaces and external buses, while the 231 multipliers support DSP-oriented arithmetic. The exact pin functions, voltage assignments, and configuration requirements should be confirmed against the package-specific pin table before schematic capture. Layout planning is critical because the 256-LBGA package requires via-in-pad or blind and buried via technology, short escape routes, and careful power-plane partitioning. Separate core and I/O supply distribution helps control return current and reduce noise coupling between high-speed interfaces and the 1.2 V core domain. This product record combines manufacturer specifications, sourcing information, package details, and practical implementation guidance. It also distinguishes true package-level replacement candidates from broader FPGA alternatives that may require a different footprint, pin assignment, tool flow, or power architecture.
EP4CE15F17C8 - 15,408-Logic-Cell FPGA | Altera
The Altera EP4CE15F17C8 is a Cyclone IV E field-programmable gate array (FPGA) containing 15,408 logic elements, 165 I/O, and 516,096 embedded memory bits in a 256-ball FBGA package. Its core supply operates from 1.15 V to 1.25 V, while the specified commercial temperature range is 0°C to 85°C junction temperature. These figures place the device between small control FPGAs and larger parallel-processing devices while retaining a relatively compact 256-ball package. A field-programmable gate array is a reconfigurable digital semiconductor. An FPGA belongs to the programmable-logic hierarchy: FPGA → programmable logic device → digital integrated circuit → semiconductor. Combinational logic, registers, block RAM, and programmable I/O are assembled into digital systems that can be reconfigured after manufacture. An FPGA therefore differs from a fixed-function ASIC or microcontroller: the FPGA emphasizes parallel hardware, flexible logic, and programmable interconnect, while a microcontroller executes software through a fixed processor core. The verified device data identifies 15,408 logic elements, 165 I/O, 516,096 embedded RAM bits, a 1.15 V to 1.25 V supply range, and a 256-LBGA package. The EP4CE15 portion of the ordering code identifies the Cyclone IV E device density, F17 identifies the package configuration, and C8 identifies the speed or ordering variant. Exact memory organization, I/O standards, clock resources, programmable-logic type, maximum frequencies, power consumption, and AC electrical characteristics were not included in the supplied verified data and therefore are not inferred here. The 165-I/O device can be evaluated for control-plane logic, parallel data acquisition, industrial automation, communications, embedded vision, and test systems. The 256-ball package exposes substantially more physical connections than a small leaded FPGA package, helping support high pin counts while requiring careful ball-grid PCB layout. Actual design suitability depends on the complete pin assignment, supported I/O standards, board power architecture, and timing closure achieved with the selected Altera design tools. A principal design constraint is that an LBGA package does not accept a through-hole footprint and must be assembled with the correct ball pattern, pad geometry, solder mask, paste stencil, and board-surface finish. Designers must also connect all required power and ground balls, observe the documented sequencing and decoupling requirements, and complete timing analysis rather than relying only on nominal logic-cell count. These package and configuration checks must be verified against the manufacturer datasheet before schematic or PCB release. This page consolidates the verified EP4CE15F17C8 ordering data, package facts, sourcing links, application fit, and replacement limitations. Unlike a distributor listing that mainly provides availability and price, it distinguishes known engineering facts from unavailable details and avoids presenting unverified timing, memory, power, and pinout data as guaranteed specifications.
EP4CE15F17C8L - 15K Logic FPGA, 256-BGA | Altera
The Altera EP4CE15F17C8L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 47 M9K memory blocks, 516,096 RAM bits, 165 I/O pins, and a 1.2 V supply in a 256-ball FBGA package. The F17 package designation identifies the device's 256-ball package option, while the C8 suffix identifies the specified speed and temperature grade ordering option. A field-programmable gate array is a programmable digital logic device that combines configurable logic, embedded memory, and programmable I/O in one semiconductor package. FPGAs sit within the broader programmable-logic hierarchy, alongside complex programmable logic devices and programmable system-on-chip devices. They replace combinations of fixed-function logic ICs with a configurable architecture that can be programmed for parallel processing, control, communications, signal generation, or interface functions. The Cyclone IV E architecture provides 15,408 logic elements for digital datapaths and state machines, while 47 embedded M9K blocks add 516,096 bits of on-chip RAM. With 165 I/O pins, the device can connect external memories, converters, transceivers, sensors, and displays. A 1.2 V core supply supports power-conscious implementations in industrial, communications, instrumentation, control, and embedded systems where field programmability shortens product-development cycles. The EP4CE15F17C8L combines approximately 15.4K logic elements with 47 embedded memory blocks and 256 package balls. This balance is useful for designs requiring parallel datapaths or moderate local buffering without moving to a larger FPGA. The 165-I/O interface also allows designs to consolidate external interfaces, although board-level planning remains necessary for voltage-tolerance, bank-power, and high-speed routing constraints. Typical uses include industrial control and factory automation, sensor acquisition, communications gateways, video or image processing pipelines, instrumentation, and embedded test systems. In each case, designers can implement multiple control and datapath functions in one programmable device, update field logic through the device configuration system, and reduce the number of discrete components compared with a fixed-logic implementation. Board design should begin with the manufacturer pin and package information for the F17 package. Decoupling, configuration interfaces, clock distribution, voltage standards, and exposed-pad or thermal-management requirements must be implemented according to the device documentation. Because configuration, bank voltages, and I/O behavior are interconnected, validate the complete power architecture and pin assignment before fabrication. This product page combines the exact ordering characteristics, package details, technical resources, application guidance, and verified sourcing information for EP4CE15F17C8L. It also highlights the engineering checks required when choosing an FPGA: logic capacity, memory availability, I/O count, package fit, power architecture, thermal design, configuration method, and software-tool compatibility.
EP4CE15F17C8N - 47-Block Cyclone IV E FPGA | Altera
The Altera EP4CE15F17C8N is a Cyclone IV E field-programmable gate array with 47 logic blocks, 165 I/O, 516096 embedded-memory bits, and a 256-LBGA package. It operates from a 1.2 V supply and belongs to the EP4CE15 F17 device variant identified by the complete ordering part number. A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic functions are configured after manufacture. FPGAs sit above simple programmable logic devices and microcontrollers in design flexibility: they combine configurable logic, embedded memory, programmable I/O, and dedicated resources into one device. This makes an FPGA useful when parallel processing, high I/O density, deterministic control, or product-specific hardware behavior is required. The EP4CE15F17C8N provides 47 logic blocks and 165 I/O in a compact 256-LBGA package. Its 516096 bits of embedded memory can support data buffering, lookup tables, packet processing, and control functions. The F17 designation identifies the device configuration, while the C8 suffix identifies the ordering variant and speed grade. The 1.2 V supply specification identifies the core operating voltage used for power-supply and signal-integrity design. Typical uses include industrial control, printer and imaging controllers, embedded vision, communications equipment, test systems, and general-purpose programmable logic. Because the device exposes 165 I/O in a 256-ball package, it is particularly useful for designs requiring numerous board connections and moderate parallel-processing capacity without moving to a larger FPGA architecture. PCB design must account for the 256-LBGA footprint, power rails, decoupling, clock distribution, and high-speed routing. The manufacturer’s Cyclone IV device documentation should be used for the authoritative ball map, power-up requirements, configuration pins, and supported design tools. Do not infer individual ball assignments from distributor pinout diagrams alone. This product page combines the manufacturer orderable-part data, package information, commercial guidance, replacement analysis, and practical design considerations in one engineering-focused reference. It distinguishes a confirmed same-family speed-grade alternative from unsupported cross-brand replacements and directs buyers to XAIPART’s Request a Quote form for current commercial terms.
EP4CE15F17C9L - Cyclone IV E FPGA, 15,408 LEs, 256-LBGA | Altera
Altera EP4CE15F17C9L is a Cyclone IV E field-programmable gate array (FPGA) delivering 15,408 logic elements, 516,096 bits of embedded memory and 165 I/O in a 256-ball LBGA (F17) package with 1.55 mm ball pitch. The device is built for cost-sensitive embedded, industrial, communications and consumer designs where a low-power, low-cost programmable logic fabric is required. A field-programmable gate array is a programmable digital integrated circuit whose internal interconnect and logic blocks are configured at power-up from a bitstream held in external flash or loaded by a processor. FPGAs sit in the semiconductor hierarchy above fixed-function logic ICs: they replace large glue-logic and CPLD solutions with a single reconfigurable die, while sitting below application-specific standard products in cost and flexibility. Altera positions the Cyclone IV E family as a low-cost, low-power family of FPGAs for embedded and industrial designs. Key characteristics of this device include a 15,408-element logic fabric, 516,096 bits of embedded RAM for on-chip buffering, 165 available I/O for external interfacing, and an industrial-style 256-LBGA package that supports high-density board escape routing on a 1.55 mm ball pitch. The F17 package offers a smaller board area than the 29 mm and 32 mm options in the same family, which matters when the FPGA must sit alongside a processor on a space-constrained control board. The 'F17' portion of the ordering code identifies the 17 mm-class 256-ball package, while 'EP4CE15' identifies the Cyclone IV E device with 15,408 logic elements. The 'C9' segment identifies the commercial ordering option for this package and speed-grade combination. Configuration, clocking and I/O standards for this device are described in the Cyclone IV E device handbook and the EP4CE15F17C9L datasheet, which list electrical characteristics, pin (ball) assignments, and package outlines for the F17 option. Typical applications include industrial control and PLC-style logic, motor drive and power-conversion control, instrumentation front ends, gateway and protocol-conversion equipment, video timing and display control, and low-cost embedded test or measurement platforms. In each case the device supplies parallel logic, state machines, counters, and data movement that would otherwise require several CPLDs and glue logic. When planning the board, budget for a 3.3 V core and I/O supply structure per the datasheet supply recommendations, and confirm ball assignment and I/O standard support for your design in the pin connection table before routing. Because the F17 package is a fine-pitch BGA, assembly houses should use the standard JEDEC-compatible land pattern defined in the package mechanical drawing and inspect solder joints under X-ray. This page brings together manufacturer ordering information, distributor channel listings, drop-in replacement analysis within the Cyclone IV E F17 family, and practical board-level design notes, so you can decide quickly whether this exact ordering code fits your design before requesting a quote.
EP4CE15F17I7N - 15,408 LEs, 165 I/O Cyclone IV E | Intel
The Intel Altera EP4CE15F17I7N is a Cyclone IV E field-programmable gate array built on 60 nm CMOS technology, with 15,408 logic elements, 165 user I/O, and 504 kbit of embedded memory in a 256-pin LBGA package. The I7 ordering code identifies the industrial-temperature grade, while F17 denotes the package configuration and C8 identifies the associated speed designation used in the same device family. An FPGA is a programmable semiconductor in which digital logic blocks, memory, and I/O are configured after manufacture. A Cyclone IV E FPGA occupies the middle of the programmable-logic hierarchy: it is more capable than basic CPLDs, yet it targets cost-sensitive control, networking, sensor-processing, and industrial applications rather than the very high performance and power of larger FPGA families. The EP4CE15F17I7N belongs to the EP4CE15 device family and the Cyclone IV E product series. The device provides 15,408 logic elements and 165 I/O for parallel interface implementation, while its 504 kbit of embedded memory supports buffering, packet queues, data tables, and small state machines. Its 256-pin LBGA supplies a high pin count in a compact land-grid array, making the device practical for boards with several high-speed transceivers, parallel sensor banks, or external memory interfaces. The industrial-grade ordering option supports extended-temperature operation where the surrounding system must tolerate wider ambient conditions. The 60 nm process and Cyclone IV E architecture balance programmable logic density against static power, dynamic power, and routing resources. This makes the EP4CE15F17I7N appropriate for control logic with moderate computational requirements, multi-interface aggregation, low-cost protocol bridging, and embedded test systems. Quartus tooling and the associated device support packages simplify configuration and design implementation. Typical uses include industrial data-acquisition controllers, communication gateways, motion-control interfaces, test-and-measurement front ends, and embedded sensor hubs. The 165 I/O count permits multiple external buses to terminate directly on the FPGA, while the embedded memory can absorb short bursts and reduce traffic to an external processor. Designs requiring larger frame buffers or substantially higher logic density should move to a larger Cyclone IV E member. The main layout consideration is the 256-ball land-grid array. Every ball must be assigned a package pin in the Quartus pin planner, power and ground balls must follow the manufacturer layout guidance, and decoupling must be placed at the associated supply pins. Confirm the exact pin definitions, voltage limits, configuration requirements, and thermal limits against the EP4CE15F17I7N datasheet before releasing the board layout. This page combines the verified device identity, package details, family comparisons, and engineering guidance with a focused drop-in analysis. It highlights where the I7 industrial grade is appropriate, where the commercial C8 variant changes qualification requirements, and why FPGA substitutions require more than a matching ball count.
EP4CE15F17I8L - Cyclone IV E FPGA, 165 I/O | Intel
The Intel EP4CE15F17I8L is a Cyclone IV E field-programmable gate array (FPGA) with 165 I/O, 516,096 bits of programmable logic capacity, and a 256-ball FBGA package. It belongs to the Cyclone IV E family and is designed for embedded systems that require reconfigurable parallel processing, programmable logic, memory resources, and flexible I/O in a single integrated circuit. An FPGA is a semiconductor whose digital functionality is defined after manufacture through configuration files rather than fixed mask changes. Within the broader semiconductor and programmable-logic hierarchy, an FPGA sits between application-specific integrated circuits and software-programmable processors. Cyclone IV E devices combine configurable logic elements, embedded memory blocks, general-purpose I/O, and dedicated resources that designers can use for control, data acquisition, signal processing, communications, and embedded acceleration. The EP4CE15F17I8L provides 165 configurable I/O in a 256-ball package. Its 516,096-bit logic capacity gives it substantially more implementation space than a small programmable logic device, allowing multiple finite-state machines, bus bridges, protocol controllers, and datapaths to operate concurrently. The F17 ordering code identifies this member of the EP4CE15 configuration family, while the I8 package and ordering suffix identify the specific industrial package variant. Because the logic is programmable, the same physical FPGA can support different control architectures as system requirements evolve. This is valuable in industrial controllers, communications equipment, test systems, embedded vision, and consumer or medical electronics where protocol updates or product variants must be handled without changing the PCB. The device is also suitable as an interface companion for external memory, converters, audio codecs, and communications transceivers. Design planning should begin with the manufacturer's pin and package tables because the 256-ball FBGA requires dense escape routing and careful power-delivery design. Engineers should verify voltage rails, configuration interface requirements, clocking, decoupling, signal integrity, and thermal performance against the manufacturer datasheet. Programming support, device files, and the exact pin names must also be confirmed for the selected board revision. This product page combines the verified device identity, logic capacity, I/O count, package information, lifecycle information, sourcing context, drop-in alternatives, and practical engineering guidance into a design-oriented reference for evaluating the EP4CE15F17I8L.
EP4CE15F23A7N - 15,408-LC Cyclone IV E FPGA | Altera
Altera EP4CE15F23A7N is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 963 configurable logic blocks, a maximum operating frequency of 472.5 MHz, and a 484-ball FBGA package. The device is packaged in a 23 mm by 23 mm surface-mount package with a 1 mm ball pitch. A field-programmable gate array is a programmable semiconductor belonging to the FPGA and CPLD hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA contains configurable logic, memory, and programmable I/O structures that engineers can configure after manufacture. This makes Cyclone IV E devices useful for parallel processing, protocol bridging, control logic, signal acquisition, and embedded system adaptation. The EP4CE15F23A7N combines 15,408 logic elements with 963 configurable logic blocks and operates at speeds up to 472.5 MHz. Its 484-ball FBGA package provides 343 I/O positions according to the distributor product listing, while the manufacturer identifies the F23 package configuration as a 23 mm by 23 mm, 1 mm-pitch device. This combination offers substantial routing and interface capacity for compact embedded platforms. The Cyclone IV E architecture is intended for cost-sensitive, low-power programmable systems. Configuration data establishes the logic implemented by the FPGA, after which programmable I/O can connect to external memory, control signals, communications links, and mixed-signal peripherals. The 1.2 V supply figure in the device listing describes the core supply used by the FPGA architecture; board-level rails and I/O standards must be designed to satisfy the complete power architecture. Typical uses include industrial control, test and measurement, communications infrastructure, embedded vision, and low-cost instrumentation. A design requiring deterministic parallel logic can map counters, finite-state machines, packet filters, or data pipelines into the 963 configurable logic blocks, while the 472.5 MHz maximum frequency provides ample timing margin for many control and interface functions when timing constraints are properly implemented. The primary design consideration is package-level signal integrity. A 484-ball FBGA requires a multilayer PCB with short, impedance-controlled escape routes, solid power and ground planes, and careful decoupling around the device. Designers should use the manufacturer pin and package information for the exact F23 configuration and validate every power rail against the Cyclone IV E device requirements before releasing the layout. This product record combines package-specific ordering information, verified device specifications, sourcing guidance, and practical design considerations. It also distinguishes genuine same-package alternatives from larger Cyclone IV E devices that are not drop-in replacements because their logic capacity differs materially.
EP4CE15F23C6 - Cyclone IV E FPGA, 15K LE, 484-BGA | Intel
The Intel (formerly Altera) EP4CE15F23C6 is a member of the Cyclone® IV E family of low-power, high-volume FPGAs fabricated on a 60 nm process and supplied in a 484-ball FineLine BGA (FBGA) package. The device integrates 15,408 logic elements, 516,096 bits of embedded memory, and 343 user I/O pins, and operates from a 1.2 V core supply with multi-voltage I/O support (1.2 V to 3.3 V). It targets cost-sensitive, high-volume applications where low static power and abundant logic density are required. A field-programmable gate array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable interconnect, all of which can be redefined after PCB assembly. The Cyclone IV E family sits in the low-power, low-cost segment of Intel's FPGA portfolio, between the legacy Cyclone III and the higher-end Cyclone V series. By combining a hard processor-free fabric with up to 6.5625 Mb of RAM and dedicated 18x18 multipliers, FPGAs like the EP4CE15F23C6 deliver parallel processing performance that microcontrollers and DSPs cannot match, while remaining affordable enough for consumer and industrial volumes. Key features of the EP4CE15F23C6 include 15,408 logic elements, 504 Kbits of embedded RAM (516,096 bits), 56 dedicated 18-bit x 18-bit multipliers, four general-purpose PLLs, 343 maximum user I/Os, and 20 global clock networks. The device supports configuration via JTAG, active serial (AS), passive serial (PS), and fast passive parallel (FPP) modes, and includes on-chip configuration memory with optional external EPCS or EPCQ flash support. It is offered in the commercial temperature grade (C6 speed grade). Architecturally, the Cyclone IV E device uses a logic-structure composed of 16-bit Logic Array Blocks (LABs) and Memory Logic Array Blocks (MLABs). Each LAB contains 16 logic elements, and each logic element contains a 4-input look-up table (LUT), a programmable register, and carry chain logic. The fabric is augmented by dedicated 18x18 hardware multipliers, M9K memory blocks, and PLL-based clock management. Typical applications include industrial motor control and machine vision, video processing and display bridges, low-cost software-defined radio front-ends, automotive infotainment and driver-assist subsystems, point-of-sale terminals, and portable medical instrumentation. The wide I/O count and multi-voltage support also make it suitable for system-level glue logic and protocol bridging between legacy and modern buses. When designing with this device, ensure the Quartus II / Quartus Prime toolchain version matches the device family support (Cyclone IV E is supported by Quartus Prime Standard, with newer Intel FPGA software maintaining legacy device support). Plan for a minimum 1.2 V core decoupling network of 0.1 µF and 10 µF capacitors within the BGA footprint, and observe the ball pitch and keep-out rules of the F23 package for PCB escape routing. This page synthesizes distributor pricing, drop-in compatible variants, and practical design guidance that goes beyond the manufacturer datasheet, including same-package speed- and temperature-grade options and pin-compatible Cyclone IV E family alternatives.
EP4CE15F23C6N - 15408-LE Cyclone IV E FPGA | Altera
Altera EP4CE15F23C6N is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 516,096 RAM bits, and 343 I/O in a 484-ball BGA package. The F23 ordering designation identifies the device within the EP4CE15 family, while the C6N suffix selects its specified speed, temperature, and package configuration. It is a programmable logic device rather than a fixed-function processor or ASIC. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. In the product hierarchy, the EP4CE15F23C6N belongs to the Cyclone IV E FPGA family and broadly falls under programmable logic, integrated circuits, and semiconductors. Its fabric provides parallel logic resources that can implement control logic, data paths, interfaces, state machines, and communication functions in one configurable device. The principal resources are 15,408 logic elements, 516,096 embedded RAM bits, and 343 available I/O positions. This combination supports moderate-complexity embedded designs without requiring a discrete microcontroller for every control function. The large I/O count can simplify board integration by consolidating multiple external interfaces onto one programmable device. The 484-BGA package also provides a high-density board footprint, although careful escape-routing and thermal planning are required. Cyclone IV E devices use configurable logic and memory resources for parallel data processing. A design can divide the fabric among control, datapath, and interface functions, while embedded RAM can support buffering, packet storage, counters, and temporary data. Exact available blocks, clock resources, and electrical limits should be confirmed against the manufacturer datasheet for the exact ordering code before final schematic or floorplan completion. Typical uses include industrial control modules, interface concentrators, sensor aggregation, embedded data acquisition, communication equipment, and compact general-purpose embedded platforms. The combination of 15,408 logic elements and 516,096 RAM bits is particularly suitable for designs that combine protocol handling, local buffering, and real-time control without creating a separate FPGA for every peripheral function. Board implementation should account for the BGA escape-routing density, programmed pin constraints, bank-specific voltage requirements, and decoupling. Confirm the required pin, voltage, and package assignments with Quartus design software and follow the manufacturer package guidelines for layer stackup, fanout, thermal vias, and high-speed routing. This product overview combines device resources, package information, sourcing guidance, and replacement considerations into an engineering-focused reference. It also identifies which same-package alternatives can support design planning while preserving the requirement for explicit footprint and temperature-grade validation.
EP4CE15F23C7 Cyclone IV E FPGA | 15K Logic | Altera
The Altera EP4CE15F23C7 is a Cyclone IV E field-programmable gate array with 343 I/O, 15,408 logic elements, and 516,096 embedded RAM bits, supplied in a 484-ball BGA package. It is designed for embedded programmable-logic applications requiring deterministic parallel interfaces, control logic, protocol bridging, and moderate on-chip memory. The verified distributor listing identifies the device as a Cyclone IV E FPGA and confirms its 343-I/O and 484-BGA configuration. A field-programmable gate array, or FPGA, is a programmable semiconductor in which configurable logic blocks, memory, and I/O resources are interconnected through user-programmed bitstreams. Within the broader semiconductor hierarchy, an FPGA is a programmable logic device used to implement control, datapath, signal-conditioning, and interface functions without relying on a fixed application-specific integrated circuit. Its bitstream defines the internal connections and external pin behavior. The EP4CE15F23C7 belongs to the Cyclone IV E family and provides a balance of logic capacity, I/O availability, and embedded memory for embedded systems. Its F23 ordering code identifies a specific speed, package, and temperature-grade combination, while the distributor record confirms 15,408 logic elements and 516,096 RAM bits. These resources support parallel data acquisition, industrial control, communications, embedded vision, and test-equipment logic. Typical implementation depends on the system’s clocking, power, configuration, and I/O requirements. Because the provided data does not include complete electrical timing, configuration, memory-interface, or pin-definition tables, those values must be confirmed in the manufacturer’s official device documentation before schematic capture or PCB release. The 484-BGA package also requires careful escape routing and manufacturing capability. For drop-in procurement planning, verify the exact package, speed grade, temperature grade, device identifier, configuration method, and pin-compatible alternative before substitution. The available cross-reference results identify EP4CE15F23I7N as another Cyclone IV E ordering code, but the supplied search data does not establish every electrical and package detail needed to certify a drop-in replacement.
EP4CE15F23C7N - Cyclone IV E FPGA, 15K LE, 484-FBGA | Intel
The Intel (Altera) EP4CE15F23C7N is a Cyclone IV E field-programmable gate array (FPGA) integrating 15,408 logic elements, 516,096 bits of embedded memory, and 343 user I/Os into a 484-ball fine-pitch BGA (FBGA) package. Built on a low-power 60 nm process, it operates from a 1.2 V core supply with 1.0 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, and 3.3 V LVCMOS/LVTTL I/O standards supported through independent bank voltages. The device is offered in a commercial 0C to 85C temperature grade with an I7 speed grade that still meets all C8 timing specifications when operated up to 125C. An FPGA is a programmable logic device built from an array of configurable logic blocks (LBs), programmable interconnect, and embedded memory/DSP blocks. Compared with a CPLD, an FPGA offers far higher logic density and dedicated multiplier/M9K memory blocks. The Cyclone IV E family sits in the hierarchy: programmable logic device -> FPGA -> low-cost FPGA -> SRAM-based FPGA, and is widely used as a glue-logic and DSP co-processor alongside microcontrollers and ASICs. Key features include 56 embedded 18 x 18 multipliers, four general-purpose PLLs, 20 global clock networks, and 343 user I/Os distributed across eight I/O banks. The 484-FBGA package offers high-density interconnect for multi-lane parallel designs, while the 60 nm process keeps typical static power below 150 mW, making the part attractive for power-constrained industrial designs. Architecturally, the Cyclone IV E uses a 4-input look-up table (LUT) logic element, M9K memory blocks (each 9 Kbit), and DSP blocks for 18 x 18 signed multiplication. Configuration is loaded through passive serial (PS), fast passive parallel (FPP), or Altera-compatible JTAG, with built-in decompression and encryption support via AES-128. The I7 speed grade offers the second-fastest -7 timing within the Cyclone IV E family, suitable for 100 MHz+ system buses. Typical applications include industrial motor control, video processing pipelines, machine vision pre-processors, telecom interface cards, and low-cost prototyping platforms. The Cyclone IV E family is also popular as a PCIe endpoint bridge, sensor-fusion pre-processor, and educational logic-lab FPGA. When designing, ensure that the Quartus II (13.0sp1 or later) pin assignments match the 484-FBGA ball map, since the FBGA footprint differs from the larger 484-pin BGA used on some competitor parts. Decoupling: place 100 nF X7R 0402 capacitors within 3 mm of each VCCINT/VCCA pin, with 10 uF bulk capacitors on each supply rail. This page combines distributor pricing, drop-in same-package alternatives, and Quartus-aware design notes that go beyond the manufacturer datasheet itself.